Satellite A300-1ed freezes while mode 'sleep' in XP

Similar Questions

• Satellite A300-1HP is not in sleep mode after 30 minutes inactivity

  Satellite A300 1HP is not in sleep mode after 30 minutes inactivity.
  Windows settings are OK (I'm an experienced user).
  He goes to sleep, if I do it manually (by pressing the power button) - but not after inactivity,

  Any idea?

  Norbert.

  Hello, Norbert

  Maybe you should check the settings of Vista power again. I have too many A300 and everything works fine.
  I tested it with all three power plans. Have you done the same?

  Usually, I use the BALANCED power plan and enter mode standby 20 minutes correctly.

• Satellite A300-1ED-CD-key for the installation of Vista OEM?

  Hi all!

  I have question. Can I legaly use cd key of windows vista Home premium preinsaled on my Satellite A300-1ED to install a clean oem Windows Vista Home Premium without toshiba or mcafee software?

  Many thanks for the answer!

  You can try to do, but it won't work. This key will not activate your own operating system preinstalled.
  This product key is for the recovery image, that you got with your laptop.

  Many people understand this wrong, especially when they sell old books on eBay and wrote: legal production key is on the bottom. And what to do with this key? You can't do anything with it.

• Satellite A300-1ed: 8 GB SDHC card does not work

  Welcome!
  I have a problem, I got an SDHC card with a capacity of 8 GB and a card reader built in, unfortunately, I don't read it. I checked the computer description, and he says that he accepts these cards. In what could be the problem?

  (Toshiba Satellite A300-1ED, PSAG4E, Windows XP)

  Hello

  Try to update the card reader driver

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Try different SDHC cards

• Satellite U840 - goes on the mode 'sleep' when you browse the internet

  Hi, I bought one of the Toshiba U840 nine ultrabook.

  Something is really wrong with these machines;
  While I surf the net, actually when I type something portable past suddenly on the mode 'sleep'? Any idea what is wrong with him?

  The bottom line is; I bought a similar machine in the shop and I went back as a defective machine, they replaced for me with the same model but this computer has a strange problem!

  Suggestions, please?

  If you plug the adapter still does?

  Or maybe you're pressing the function key suspended above the keyboard or by pressing the power button?

• Satellite C650-1CN won't mode 'sleep'

  The laptop doesn't pass in mode 'sleep'. The screen turns off but the PC does not sleep. I can force the sleep using the function keys, by closing the lid or the start menu.

  I have two Satellites with the same applications, it works perfectly, but it does not sleep. The old PC running Windows 7 32, the new PC running Windows 7 64 with Toshibas own power management utility.

  I tried to change the power management settings in Windows 7 and this has not solved the problem. The computer won't sleep on a network or in battery mode. The PC is a C650-1CN, bios has been upgraded to 1.5 and it has 4 M of RAM.

  Spoils a beautiful machine that is a good value.

  > The laptop don't pass in mode 'sleep'. The screen turns off but the PC does not sleep.
  > I can force the sleep using the function keys, by closing the lid or the start menu.

  Have you tried to change the different time for mode 'sleep'?
  How about processes that are running in the background?
  These running processes can prevent the notebook to access the mode 'sleep'.

  As you can see here on this screeshot, it s necessary to the configuration of the power plant.
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  In addition, you have to be sure that this plant has been set as default!

• Satellite A300 - windows freezes

  Dear users of the forum,

  I have 1 Satellite A300 laptop computer with vista.

  recently, o pointed out, if I right click on an icon on the desktop, the freezing of the system to meet and the circle to keep vista on spinning.

  If I pressed again and again, the box of dialogue "program has stopped working, close/restart/wait option" made its appearance.

  after reboot, the windows sidebar gadget all yahoo messenger icons appearing in the task bar at the bottom (which normally does not appear in the taskbar), and they don't react again to close / minimize/maximize whatever it is in the taskbar.

  can someone diagnosis disease?

  It is not easy to offer a diagnosis based on your story.
  It will be interesting to know since when this happen?
  You have installed software or installed updates in recent days.
  Try to roll back the OS to an earlier time to see if this will be fixed.

  By this simple step please start and inform us about the result.

• Satellite A300 - Vista freeze using videoconferencing MSN

  Hello

  My computer laptop freeze when I m using MSN video conferencing.
  I can start a video conference, but after 15 or 20 minutes, the freezing of the computer laptop everything and I have to press the start for more than 5 seconds power button restart.

  I tried uninstalling and reinstalling messenger several times, I tried different msn messenger (8.1 beta) but it give me a note telling me that I needed some kind of code.
  I read a lot about troubleshooting with Satellite A300 Vista msn but I am new to using the pc.

  Friendlygiant

  Hello

  > but it gives me a note telling me that I needed some kind of code.
  Is what code exactly?

  What webcam you use with MSN?
  What is the internal webcam A300?

  In your case I would recommend the update to Vista everything. Please check if SP1 has been installed already.

  In my opinion, this issue may be related to the issue of software and updates are really important.

  Good bye

• L750D-1DQ satellite - black screen after the mode 'sleep'

  My new laptop L750D 1DQ does not start correctly after the return of the mode "Eve".
  The screen is very dark, I can't seem to clear up.

  I tried the combination FN + F7, but it does not work (and other shortcut keys do not work ether).
  When I restart, the screen works again.

  What must I do, so I can start to work after returning from the mode "sleep"?

  Hello

  You are able to change the brightness in Power Options Win 7?

  Check this box:
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  You can choose a power plant that is enabled in the profile of power you use.
  You will see the option to adjust the brightness of the plan.
  Set the control to the right to increase the brightness. Do this for setting battery and area setting

  In addition, you should go to advanced-> display settings
  Here, you must choose the brightness of the display and need to change the value of %. This defined the default display brightness when battery and AC power running

• Satellite A300-1ED - upgrade CPU of PDC to C2D

  Hi all
  Small question. I still have six months toshiba warranty on my A300-1ED. laptop is very good. Never fail. But it lacks performance so I want to upgrade my PDC T2390 to some C2D processor.
  Tell me what model of C2D my A300-1ED runs (card mother and bios)? T7500? T5750? Frequency FSB? 667 or 800?

  Someone at - he do it before?

  Thanks for all the tips!

  Hello

  First of all, you will lose the warranty if you would disassemble the laptop!
  This should be clear to you.

  Then there is no guarantee that your laptop would go well and stable after this upgrade the CPU.
  I m thinking about issues of compatibility between the processor and BIOS since the BIOS was pretested with the other processors.

  However, I have read some threads here on the CPU upgrade and some users do that
  Seems that some laptops run without any big problems after upgrade CPU, but I think it's not consistent for all series

  Perhaps this topic could be useful:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53802
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=205508

  Welcome them

• Satellite U300-V13 is in mode "sleep" for no apparent reason

  Since I bought this PC in February I had the problem happening in mode 'sleep' without apparent reason. I have
  have installed the latest version of the BIOS.

  Can anyone help because it is very annoying when you are in the middle of something.

  Thank you

  Hello

  I do not that this will help, but maybe you should do BIOS update and install the latest value added package.

• Satellite A300-15j-no wake mode from 'sleep'

  Hello

  I just bought my computer about 1 week ago. Sometimes I tried to sleep, he did not resume the return or wake up. The power light is still on. The fan is always on.

  The screen is black and does not. I can only restart the computer every time that happens.

  Please, give me some advice.

  Hi, I have the same problem. But I noteced, it happened when the laptop is to connect to the LAN. If there is resolve, please give me know.
  [email protected]

• Satellite A300-1ED - super slow performance of SSD

  Hi people,

  My 2009 toshiba a300 is a great laptop, but after 5 years of use, it slows down a bit.
  I tried to improve it with new CPU - unfotrunatlly BIOS run.

  So, let me show you my current specification: T2390 1, 86 MHz dual core, 4 GB of 533 HD3470 GPU, RAM, windows 7 64 bit edition Home premium and to speed up everyting, I recently bought 120 GB 840 evo ssd.

  The results? Horrible...
  17, 4 MB/s when copying random file.
  [http://oi57.tinypic.com/34fyw5s.jpg]

  Guys, help me.
  He got the last intel ich8 drivers (I can't install Intel Rapid Storage - don't know why "this platform is not supported'), beta drivers GPU, fully updated, Bios 1.80 Samsung ssd frimeware magician WIN. Startup time is also very slow.

  > Results? Horrible...
  I'm not sure but think that the SATA HDD controller supports SATA so you can expect the theoretical speed of 150 MB/s I. (or lower) but so be 100% sure you should install some like Everest Home Edition or AIDA64 hardware diagnostic tools. In the best cases, it would be SATA II

  What SATA mode is set in the BIOS? AHCI or compatible?
  If it s all in compatibility mode, the SSD drive would not use SATA properties.

  In order to use SATA performance, you must set the AHCI in the BIOS and installing the Win 7 system, you must add the SATA driver (part of the set of Storage Manager intel IRST)

• Satellite A505-S6030 hangs in mode 'sleep'

  So I got the A505-S6030 for about a month and a half because it was a good deal, but now I think I'm regretting my interest to be a Hunter of the windfall.

  My main problem with this laptop, is that whenever he goes into sleep mode, the computer crashes and I have to hold the power button in order to stop it (Yes, I tried the trick of the caps lock and the light does not illuminate).

  When he 'plant', the power light is still on as well as all my media controls, but the screen is stuck on a black background and the computer is frozen. Sometimes after I do that, I have to relight several times just to get going again. I tried to update my NVIDIA drivers via their official website. All I was really able to take advantage of these accidents is the following:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 9f
  BCP1: 0000000000000003
  BCP2: FFFFFA8003D854A0
  BCP3: FFFFF80004AC3518
  BCP4: FFFFFA8003E46C50
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Users\Me\AppData\Local\Temp\WER-48282-0.SysData.XML

  My second problem which just started is pregnant Harman/Kardon "premium sound.
  In the beginning, it was the right speaker has completely exploded suddenly, and only sound from the left speaker was working. I've updated the Realtek High Definition Audio drivers, and it seemed to solve the problem.

  A few days later, only the right speaker now works, and the left has more noise.
  Do you really think I have horrible luck and Harman/Kardon speakers have gone bad already?
  I hope not, because I never put the volume high enough to blow them (literally keep less than 50% at any time).

  Sorry for this long post and thank you for your time.
  Any help is greatly appreciated!

  Hello

  I agree with the user above and recommend that you install the latest drivers of Toshiba display rather nVidia because nVidia drivers are not pre-tested and nobody can tell how they work and if they cause problems.
  You can download all the driver here updates:
  http://www.CSD.Toshiba.com

  In addition, it would be interesting to know if this happens on the pre-installed Windows version or you have installed a different version of Windows?

• Re: Satellite A300 GN1 hhd PIO mode by default... problem need to DMA

  Hello I have a problem with Ide channel. I reinstalled Vista to xp, in the bios sata option is set to "compatibility" and I can't change hhd to ultra DMA... Here is the photo http://img386.imageshack.us/my.php?image=65634705sv6.jpg
  my pc is running very slowly... maybe someone knows how to change pio to DMA mod?

  Sorry for the bad English

  Wait a minute: you use Vista and Windows XP Home edition or you installed Vista only? I didn't understand exactly what you wrote.

  If you are using Vista just go to BIOS settings and set SATA controller in AHCI mode. After restarting Vista several AHCI drivers will be installed and Vista work well will win.
  If you use two operating systems, it can be problematic, because you can not set on AHCI back. You will get the blue screen after each start up Windows XP Home edition.