Satellite A300 - 1GC PSAGCE connect to the TV via HDMI on Win XP

Hey everybody,

is it possible to connect an A300 1GC with Windows XP to a fullHD TFT via HDMI Port?
I can't find the drivers for the HDMI port on the Toshiba support page, there is one for Vista, so it is not possible with Windows XP?

The VGA port can´t normal display solutions-HD 1920 x 1080, correct? (ATI Mobility HD 3650, 1 GB)

Thx a lot for your help

Podozyt

AFAIK for HDMI port you need separate driver. Audio and video signal should be addressed without any problem, but I'm skeptical about obtaining a full HD resolution.

Tags: Toshiba

Similar Questions

  • Satellite A60: Unable to connect to the internet via a modem - no dial-up

    In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

    Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
    The driver is asyncmac.sys = MS Access Remote network serial driver.

    I have:
    -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
    -modem uninstalled / reinstalled
    -update of Windows XP through windows update
    -update of the bios / modem / network drivers from Toshiba

    No luck, the RAS asynchronous card error is still there.

    Any suggestion?
    Thank you
    Alessio - Italy

    I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
    The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
    On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
    http://forums.practicallynetworked.com/showthread.php?t=6781
    I followed the instructions and run RArepair.exe.
    It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

  • ENVY 17-j053ea: no sound on TV connected to the laptop via HDMI

    When my laptop is connected to my TV via HDMI computer laptop if poster on the TV but the sound is played if the laptop speakers and not the TV.

    I had this problem since I bought the laptop in October 2013, while she was running Windows 8, it is now running Windows 10, which actually has no difference.

    I tried to update the drivers of graphics card (NVIDIA GeForce GT M 740), Intel HD Graphics 4600 graphics card and speakers. If I'm in the playback devices, that the TV does not, even when it is set to display disabled and disconnected devices, but I do not know why.

    I know that the problem is something to do with my laptop and not on cable TV or HDMI because it works with 2 other laptops in my house, and the TV is shown as an audio device on both.

    Any help or suggestions are greatly appreciated.

    OK, this driver must have worked.

    Just click on this folder 7-zip created because I want to show you where to find the driver.  We will now try to force the installation.

    Click on the file and it will show several records.  Click the DisplayAudio folder.

    Then, there are two folders inside this one.  Click on the top a list (6.16.00.3178).

    Then click on the configuration file IntcDAud and you will see the driver for the hardware ID you have posted.

    HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101.

    Close to this now.

    Go to Device Manager and click again on the HD audio device.  Click the driver tab.  Click on set to update driver.

    Select the browse my computer for driver again software option, but this time at the bottom of this window, select the let me pick from a list of drivers for devices on my computer.  Then click on disk and browse the right to this configuration information IntcDAud file and see if the driver will be installed in this way.

    If this is the case, restart the PC.  If it is not, unfortunately, I have no idea why this driver not install because it must have worked using the first method.

    But this lack of driver, that's why you have no audio from the HDMI out port.

  • Satellite A300 - does not connect to the secure network to WPA

    Help please... new Toshiba Satellite A300 - running XP Professional with atheros AR9281 (driver 7.6.0.200) wireless network adapter will not connect to the secure networks, WAP, but seems to be fine with the WEP and non secure networks?

    I can connect to my WAP secured network using LAN cable and also if I use an external Netgear wireless adapter, so the problem is probably with this adapter or driver. I updated the bios and tried update driver, but no luck. Current driver is (I believe) more up to date?

    Would be grateful for your help.

    Thank you.

    On the Toshiba site is a newer version of the driver available (7.6.1.149.1)
    Then I would try the new driver.

    Consult the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Satellite A80: Failure to connect to the internet via an ethernet cable

    I'm having problems to get an internet connection via a cable ethernet to my office. The laptop works everywhere else, but not in the office. The strangest thing is that my desktop at the office computer works perfectly with the same cable.

    The icon in the taskbar of configfree reads "MARVELL YUKON 88E8036 PC... 169.254.95.8"no matter how many times I disconnect and reconnect it to my office. Curiously, the IP Office when it is connected to the same cable is 192.168.1.69.

    I was told to change the tcp/ip properties manually, but I'm not able to do because I have not all entries in the NETWORK CONNECTIONS or can't seem to create a new.

    I would be grateful if anyone has any suggestions.

    Hello

    I wonder why you have no entries for network connections.
    Click Start-> settings-> network connections-> connections to the Local network-> properties

    Select the Internet Protocol (TCP/IP), and then click Properties.
    If you use a server in your office and the IP address is assigned automatically then all TCP/IP parameters must be on automatically

    Check it!

  • Satellite P200 - 1EE, problems of HD - DVD after you connect to the TV via HDMI

    Hello

    Like many others I have read on here that I'm too have problems with playback of HD DVD.

    However the difference for me seems to be that, initially, I was able to read my DVD HD (it was the movie 300 passing) until I tried to connect the laptop to my HDTV via HDMI (it is only 720 p not 1080i). He doesn't have to play with the message "not responding". Now, the HD-DVD will not play even on the laptop.

    Any suggestions?

    I tried to use windows restore without success and also tried to download the update of the driver, as described in other posts, but the download is not completed. (also I can't find an update of the firmware on the Toshiba site)

    Any help is greatly appreciated.

    Thank you
    John

    Hello

    After watching HD-DVD on your TV you have arrested film closed HD-DVD player, back switched to LCD screen using FN + F5 key combination and then disconnected the HDMI cable?

  • Tecra M2 - not connecting to the internet via WLan and Win 2000

    Recently got Tecra M2 working under windows 2000 after the help of this forum. - jarviei post.
    I had a problem with the Intel pro 2200bg Intel wireless card type.
    The unit was able to provide info when right clicking the device in Device Manager, a report of the "State of the unspecified device" or similar has been posted.

    I removed the drivers and used an older version that cured this problem.
    To driverguide.com: intel_proset_9020tic_97904.zip
    But I can still access internet t.

    I can connect to the router wirelessly with the connectivity of 100% but that s where it stops. I use the wireless LAN hard wire disconnected.

    Using the Toshiba connectivity doctor using wire hard watch my laptop connect to the router - it shows as a hub/bridge and then connection goes ot to the internet.
    When I use the wireless radio icons show the laptop to the router but no internet connection.
    The router shows as an ad-hoc connection, almost as if he sees it as another pc.

    How and where can I set the machine to tell him to serve as a gateway/router to the internet in the wireless?

    Thanks in advance to all who help.

    Great news!

  • No pavilion dm1 sound when I connect to the tv via hdmi

    I put the HDMI as audio by default output when connected to the TV and have no sound.

    I've updated the Bios, graphics and driver sound but still no joy.

    Here are the details of the laptop if it helps...

    No. A2D08EA #ABU

    Serial number {removed privacy}

    Display graphics card AMD Radeon HD 6320

    The Windows 7 32-bit operating system

    All sorted now and works great

    After the recovery to factory settings, I tried connecting via HDMI on my main TV (Plasma LG 50PC1DA) and it still does not work... Tried another HDMI cable and still no joy with the sound.

    Tried the DM1 on two TVs (Samsung LE40R74BD of LCD and a Panasonic Plasma TH-42PX8B) and everything worked fine... Was not what anyone defined as default... Just connected via HDMI cable and all was fine...

    Hope this helps other users having the same problem

    Now for a couple of beers

    ATB Kev

  • U2414H to connect to the PC via HDMI and chaining

    Hi all.  I have two US2414H I am trying to connect to my Dell XPS of 5 years.  The NVIDIA Geoforce GT 740 LP graphics card has only one of each DVI, HDMI and VGA ports.  No DP to all ports.  I managed to connect a monitor with a HDMI to HDMI connection.  The manual says to use cable of DP/miniDP to chain the two monitors together, but I can't get this to work.  I tried switching ends, I plug into which monitor.

    What happens if I got a DP/DP cable or cable miniDP/miniDP, rather than using the DP/miniDP cable supplied with the monitor?

    I begin to fear that, without connecting the monitor 1 via connection DP, I won't be able to Garland.  I'm wrong, or is there a solution?  I'll be forced to install a new graphics card with port of DP?  $$$$$

    I really didn't know that I should be an expert comes to install a COMPUTER monitor.  JSYK, I'm far from being a COMPUTER expert.  Laughing out loud!

    FYI, I was on the phone last night, with Dell technical support, and the representative told me that, without port DP on my PC, I need a HDMI to DVI cable adapter.  I bought one, and it still doesn't work.  Not amused.

    The U2414H has two HDMI ports. Thus, when you open the OSD (On Screen Display) - input Source, you should test both the HDMI listed.

    Daisy chain of the U2414H, you need to get a video card with DP or CDM outside.

    In theory, it should work =
    GeForce GT 740 out HDMI--> HDMI to HDMI Cable--> #1 U2414H HDMI in
    GeForce GT 740 out DVI--> DVI to HDMI Cable --> HDMI U2414H #2 in

  • How to set the resolution of TV connected to the computer via HDMI?

    original title: new brand lenovo PC, windows 7, connected to my samsung tv with HDMI, screen too large, can not see the button to start clock, icons, etc what do I do?

    I have a new computer Lenovo with Wwhat to do? indows 7; I use a Samsung LED tv for a monitor, HDMI connection.  The screen is too big for the monitor, I don't see the button start, icons, clock, etc.

    Hello

    You can see the following article for more information on monitor display problems:

     

    Get the best display on your monitor

    http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

     

    Ways to improve display quality

    http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

    Let us know if that helps.

  • L750 satellite will not connect to the TV via HDMI and stops

    Hello

    When I try to connect my laptop Satellite L750 (a Conia Plasma) TV via a cable HDMI, the laptop screen turns black and becomes immune, while TV records the laptop for a second, but then said no signal. Even when I take the HDMI to the computer, the screen will remain always black, and I end up having to restart.

    I tried all the HDMI ports on the TV and the different HDMI cords without change.
    Other laptops will play on TV without problem and my laptop will join also the other TV more, so I'm completely at a loss as to why the two custom work together!

    Also (not sure if it is relevant or not) but when I press FN + F5 to display output options, the only option available is output to LCD display. Is that means the laptop will connect only with a LCD TV?

    Is it possible to change/upgrade, that?

    All advice from someone who has had a similar problem or help from someone who knows how to solve this problem would be greatly appreciated!

    Thanks :)

    You can use the HDMI out port in connection with all TVs and external monitor which favour the HDMI IN jack.
    The HDMI isn't limited to a certain TV interface.

    The FN + F5 key combination to toggle between internal and external monitor/display (if connected).

    In your case, there is an open question about preinstalled system.
    Do you use the operating system preinstalled by Toshiba or did you change it in the past?

    If you have changed the system, the problem could be linked to the preinstalled graphics driver.

    However, my recommendation is simple:
    First of all I recommend you to reinstall the graphics driver.
    First uninstall the installed driver (do this in Device Manager). Then download the compatible driver from Toshiba UE driver page and perform the installation.

    Now close the notebook. Switch on and press F2. Now, you need to access the BIOS.
    In the BIOS, press F9 to load default settings. After that, press F10 to save the changes and exit the BIOS.
    Now connect the laptop to the TV using an HDMI cable.
    Turn on the TV and then laptop.
    Shortly after, use the function FN + F5 keys to switch to the external video output.

    Good luck!

  • Display problem laptop computer connecting to the TV via HDMI

    I have a Satellite L500 - 19 X and when I connect the laptop to my Sony's Bravia TV, the screen is constantly restless.

    I tried to change the refresh rate, but that did not help. The HDMI cable should not be the problem, because it works very well with my Xbox. The problem is there for both in dual display and expand options display.

    Someone else has the same problem and found a solution?

    Thank you

    > That's the problem for both in dual display and expand options display.
    And when you see the desktop on the TV only?

  • Presario CQ61 connect to the TV via HDMI on Windows 7

    Hello

    I can't understand how to connect my Presario CQ61 Notebook to a Philips TV HDMI on Windows 7. I checked the settings in the control panel in Windows 7 and put them in several screens. Under the NVIDIA Control Panel, I cloned the views. Nothing happens, black screen on TV with the message "no signal". The laptop is recognizing the TV properly by the way.

    Help, please. I already spent 2 hours on it. Tried various items online, but nothing seems to work. The HDMI cable is OK. I plugged a PlayStation to TV. Seems that it is not a hardware problem, but something with the settings on my laptop.

    Hi @bonbon,

    Thank you for visiting the Forums HP's Support and welcome. I read on your Compaq Presario CQ61 notebook and not able to connect a HDMI monitor. Here is a document on how to connect the TV.

    I hope this helps.

    Thank you.

  • I have an asus k53z. When I connect to the tv via hdmi hd, out of netflix hd images are a bit slow?

    See the topic.

    Hello

    The question is limited to NetFlix?
    Silverlight uninstall and reinstall. Follow the given steps and check whether the problem is resolved.
    Method 1:
    To uninstall Silverlight, check out the link and follow the steps.
    Uninstall or change a program
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
    Method 2:
    To make sure Silverlight is completely removed from your computer, visit the link and run the Fixit.
    Solve problems with programs that cannot be installed or uninstalled
    http://support.Microsoft.com/mats/Program_Install_and_Uninstall
    Method 3:
    See the link, download and install the latest version of Silverlight.
    http://www.Microsoft.com/Silverlight/
    Method 4:
    Update drivers and check if it helps to solve the problem.
    Update drivers: recommended links
    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
    You can also check out the link below.
    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
    For more information, you can check this link:
    Connect your computer to a TV
    http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV
     
    If the problem persists then post the question here:
  • Re: Which driver WLan I need for Satellite A300-1GN PSAGCE

    Hello people...

    I need help for my friend...
    Here we have a laptop Toshiba Satellite A300-1GN (PSAGCE) and on the page of the driver Toshiba, for each card has two or three companies...

    For example, wireless LAN, a Realtek, Atheros, Intel... which is right?
    Where I see that?

    I would also like that when I am trying to download a driver LAN wireless, I see a message that I do not have permission to view this page...

    What can I do?
    So I have now 4 yolks in Device Manager.
    Three things of base system and wireless LAN...

    Help, please! Thanks in advance...

    Hello

    As I m not wrong not the Satellite A300-1GN supports WiFi card Intel 802.11 a/g/n and you might find the WLan drive on the Toshiba WLan Portal:

    http://APS2.toshiba-tro.de/WLAN/

    Welcome them

Maybe you are looking for

  • Overview of the mobile site

    Last updated does not appear mobile preview using Ctrl + Shift + M combination.

  • Recovery mode - forgot Access Code

    I have an iPad that has been used by a student who does not know his access code.  IPad has never been synchronized with iTunes, or was he already saved in iCloud. When I connect to a computer with iTunes and choose restore - it tells me that it cann

  • info on the new R8500 or r8000

    These new routers still have problems with ipv6?

  • HP 2159 m monitor audio does not work

    I would have assumed that the driver download, etc., would have set up correctly, but it does not work. (or I'm expecting something that does not happen?) For example, in listening to an Internet radio station, the only sound I get is from the hard d

  • Screen automatically minimizing

    Every 90 seconds or more, while playing games, the screen automatically reduces. Why is this happening? I read some of the previous reviews, I have a firewall secure system in place. He seems to have only started happening since getting a Wi - FI. He