Satellite A300-1HP is not in sleep mode after 30 minutes inactivity
Satellite A300 1HP is not in sleep mode after 30 minutes inactivity.
Windows settings are OK (I'm an experienced user).
He goes to sleep, if I do it manually (by pressing the power button) - but not after inactivity,
Any idea?
Norbert.
Hello, Norbert
Maybe you should check the settings of Vista power again. I have too many A300 and everything works fine.
I tested it with all three power plans. Have you done the same?
Usually, I use the BALANCED power plan and enter mode standby 20 minutes correctly.
Tags: Toshiba
Similar Questions
-
Satellite P30 Pro: Will not properly sleep mode
Hello
I do not normally use the standby feature, but it hibernates.
Recently, I started using it, so I keep the supply charge of the power supply of the wireless mouse.
Unfortunately, he's not exactly going in standby mode it used to - I close the lid and I can hear the fan turns off after a few seconds (about 20) standby red LED flashes and then they come back after 5/10 seconds and stays on.The standby light goes green on and in practice, it is, switches the screen off the power and the ADSL connection - that's all.
I did close the cover of the last night and found this morning with 3 green LEDs on the fans running!Any help?
Please note that the settings are correct - I just checked and it is set to go into sleep mode by closing the lid.Thank you
MoboPS: Lately, I have day a few drivers from the Web from Toshiba site (can't remember which)
Hello
If I understand you right, the laptop is on standby and it s is always connected to the local network.
Well, maybe there is a wake-up on LAN enabled mode who wakes the machine automatically to standby mode.
Try to access the BIOS and LAN / WLan, settings on the card and if necessary to disable this option.
-
Windows sleeps only during the performance of PC games (not all PC games, sometimes with Call of Duty 2 but not with FIFA 07).
According to my settings sleep mode & disable the display are set to never for both blocked in battery mode. Any help would be appreciated
Thank youHello
1. what happens when you restart the computer from sleep? It back to windows, such as the release of sleep or does go through the normal boot process?
2 have you done any recent software or the hardware changes on your computer?
3. don't you face the problem only by playing games?
Method 1:
I suggest you to run a full scan of your computer and check.
Microsoft Security Essentials
http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
Note: If infections are detected during the scan, it is possible that infected files would be deleted.
Method 2:
I also suggest you to start your computer in a clean boot state, and check if all third-party software could be the cause. Clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135
Note: Don't forget to return the computer to normal after completing the troubleshooting by following the steps described in step 7.
Method 3:
I also suggest that you perform a clean boot material to check if the problem is caused by any device.
Follow these steps to perform a clean boot material:
a. disconnect all external devices.
b. start the computer in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
c. click 'Start', type 'DEVMGMT.ยป SMC"in the search text box and press ENTER."
d. expand "graphics cards".
e. right click on your graphics card, select "Properties"
f. click the "driver" tab, click on disable (disable the selected device). Click OK
g. use the same method to disable other devices such as: map of the sound card, Modem, network, CD - R drive. Note Some devices not available must be disabled.
h. restart the computer.
After you turn off the devices, start in normal mode and try to activate the devices one by one and check which device is causing the problem.
-
HP pavilion/dm4 goes into sleep mode after 1 minute - it's a Cannonball!
I checked my control panel settings, then advanced settings (for the notification icons - which does not apply to this problem).
What I put, I'm working at my computer and screen will still sleep a minute after, if I'm not touching the keyboard.
What I don't get. I need at least 5 minutes or longer before it should go to sleep. My office computer goes to sleep after I do it.
Thank you.
Doug
I assume you mean that you have checked your Power Options settings in the control panel?
Have you tried clicking on a blank spot on the desktop screen and selecting Customize? From there look "Screen saver" settings at the bottom. It can be set to "empty" with a time of 1 minute.
-
Satellite A300 - 1HP Vista x 64 drivers
Hello
Since 2 days I have Vista Ultimate x 64 on my Satellite A300-1HP and I have several problems.
First of all, I badly need some drivers. And to be exact I need drivers for-Sound card
-Modem
-O2Micro SD storage device
-J' I need the Toshiba Value Package tooIf anyone can help me please do!
Thanks in advance!Best regards
Atanas
Your Satellite A300 belongs to the series of PSAJ4E and the Toshiba site for this model are not 64-bit drivers available.
I think you must search on external Web sites for the drivers and try to download and install the VAP from another model of laptop.
As far as I know the sound driver and modem, you can get on this site:
http://www.Conexant.com -
Satellite A300 - 1HP Intel Core 2 Duo T8100 'Penryn' question
Hello
I have some problems with the T8100 CPU in my notebook. The energy saving features, especially Speedstep, does not work properly under Windows Vista and XP. If I use High Performance in Vista Power Options, the processor switches between 1.25 GHz and 2.1 GHz.
The minimum and maximum processor state is set to 100%. I also installed XP and Toshiba Power Saver, the automatic CPU processing speed does not work it and this tool needs to be updated! I hope that these problems will be fixed soon!
Enhanced Intel Speedstep Technology require a compatible BIOS, a compatible operating system and a compatible Intel processor.
Satellite A300-1HP supports all of these features.But I wonder how did you test the CPU performance and why you're suggesting that this feature does not work properly? ?:|
To my knowledge the Core 2 Duo CPU run * always * better performance.
If the performance of the processor are not necessary the CPU will then lower to save energy and reduce heat dissipation.So I don't really see any problems with the Intel Speedstep technology!
By the way; I noticed that the new BIOS updates are rented on the Toshiba page. Try to update the BIOS.
Good bye
-
Console buttons multimedia Toshiba Satellite A300-08WB do not work
Hey all,.
I reinstalled the driver and I restored my computer but the buttons backlit Toshiba multimedia Console still does not work.
Any help appreciated.
Cheers, Levi
PS. would it not under warranty
> I reinstalled the driver and I restored my computer
This means that you have used the Toshiba Recovery disk?
Have you created a Toshiba recovery disc at the beginning?I think that if you didn't use the recovery disc, then the question refers to the missing part of the driver or software
But Satellite A300-08WB is not known to me what model number of the laptop is it?
You can find the numbers at the bottom of the unit -
HP Windows 7 home prem OA: my laptop won't come out of sleep mode after starting upwards!
Hello I have a HP Windows 7 home prem AO. And I can't raise the lap top the sleep mod after departure. I tried rebooting with the removable battery according to the HP video help. But it does not help me I done all I can! If anyone can help me please!
Hi there @Zotya15,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the computer not to wake. I'll be happy to help you.
Please post the complete product and the operating system on your computer. Check out the following, if you need assistance with this information.
How can I find my model number or product number?
Is the Version of Windows on my computer 32-bit or 64-bit?I will do everything I can to help to get more information.
-
My laptop goes into power saving mode after one minute. Someone knows why?
It's just started happening yesterday. I use a Toshiba laptop and out of nowhere, my PC goes in power saving mode after one minute when ALL my settings for this mode is 30 minutes. Does anyone know how to fix this?
Hi MattLipkint,
- Did you the latest changes on the computer?
- When was the last time it was working fine?
- You have security software installed on the computer?
Method 1
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
Method 2
If the previous step fails then I would suggest that you update the display adapter drivers, basic input/output system (BIOS) and motherboard chipset drivers.
Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
How to manage devices in Windows XP
http://support.Microsoft.com/kb/283658
How to solve the problems of hibernation and standby in Windows XP
-
Satellite A300-29N do not want to install linux
Hello, I have a Toshiba satellite A300-29N
Nautilus can read and open the partitions with no problems
but when I try to install ubuntu (ubuntu installer does not read my partitions) gparted even read my hard disk as unallocated
Here is a screenshot
[http://img156.imageshack.us/img156/5...reenshotlv.png]and here is the result of
Code:Ubuntu@Ubuntu:~$ sudo fdisk-l/dev/sda
Disk/dev/sda: 320,0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 bottles
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4bcb0fb6Device boot start end blocks Id system
/ dev/sda1 1 192 1536000 27 unknown
Partition 1 does not stop the cylinder limit.
/ dev/sda2 * 192 9982 78643371 7 HPFS/NTFS
/ dev/sda3 19628 20933 10490442 + 7 HPFS/NTFS
/ dev/sda4 9983 38913 232388257 + 5 Extended
/ dev/sda5 9983 14014 32387008 + 7 HPFS/NTFS
/ dev/sda6 14015 19627 45086391 7 HPFS/NTFS
sda7 20934 30724 78646176 7 HPFS/NTFS
/ dev/sda8 30725 38913 65778111 7 HPFS/NTFSPartition table entries are not in the order of disc
any solution because I can't install ubuntu or any other Linux Disto.
seems the problem on the hidden 1.5 GB recovery partition
Post edited by: kebomix
You use the last Ubuntu?
Try setting the SATA Mode to compatibility (located in the BIOS, press F2 at the Toshiba logo after power up).
-
Satellite L300 automatically wake up from sleep mode
Hello
I have Toshiba Satellite L300.
One day I found that when I close the laptop it goes in standby mode (as it should), but after a few minutes it is turn on even if it is still closed.After several minutes, that it's going to sleep again and then again are put on...
Before there was not such a problem!What is the problem with my satellite?
Hmm that's strange
Maybe wake up on LAN or another wake-up call option affects this stand in mode?Try to disable this option in the BIOS and in device-> properties-> Advanced tab LAN Manager.
Have you also checked the settlement by Vista power management settings?
Do it!+ How to manage Windows Vista power management features? +
http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41 -
Satellite L650-16w: BIOS 2.40 fan does not start standby mode after
I have the toshiba Satellite L650-16w
the version of the bios is 2.40I have a problem: when turning on the pc, the fan speed is still 90%, whatever the pc, and if the computer goes into sleep mode the fan stops and does not restart and I got the message: 'problem with the cooling system, turn to pc immediately '.
I had this problem also when I got the 2.2 bios, when I upgraded to 2.40 for a few weeks, everything was normal and now the problem again.
You set the default BIOS?
Make sure in the BIOS, press F9 and then save the changes by pressing F10. -
Apple TV Airplay of 4 works is not in Sleep Mode
Hi all
I have a problem with my new ATV4 and the use of airtime. If I turn on the ATV with the included remote control, I have no problem using airtime and everything works as it should. However, if I put my ATV in standby mode after a few minutes the Airplay icon will disappear and I am not able to start it by sending the contents of airtime to it (btw the remote for iOS devices app is also not able to connect in standby mode and run it). Now, I've already owned an ATV2 and with this device I've ever had any of the problems noted above. I tried many things such as giving the ATV a fixed IP address, deactivation and reactivation Airplay, restart and finally completely restore the device. After that nothing helps I contacted Apple for support and after several calls which included to restore the device again once they are now trying to tell me that my problem is
not a problem at all, but it is intentioned behavior of the device. Please can someone of you confirm that you are able to connect to your ATV4 also during the night before and wake up, it? With this information, I would then contact support again.I already thank you in advance and best regards
Oliver
Yes, I am able to launch an event Apple AirPlay TV 4 sleeping. In my particular case, I have a mixed network (ethernet and wifi) between the two devices.
-
Satellite A300 - Vista does not load, the computer does not start
Satellite A300
Model number: PSAGCA-02W010Vista won't load; have you tried to start repair; System Restore and boot in safe mode, none of them work. I get the error "error 0 x 80070570: the file or directory is corrupted and unreadable."
I don't know what I did with my recovery CD; or if I even got one with my purchase (from Harvey Norman).
Please tell us what can be done.
Hello
What you can try is to install Vista using disk HARD recovery option.
How it works, you can read on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htmIf it works all the data saved on the C partition will be deleted but the data saved on the D partition will always be there.
-
Re: Satellite A300 - fan does not work after installing Win7
Hello.
I did a new install of Win 7 pro 64-bit, and after it does not my fan, not at the start or in Windows. To check if it the fan itself was broken I re-installed Vista instead and the fan worked again!
Installed new Win 7 but now it's silent :( I checked in the BIOS (latest version 1.80) but I couldn't find any option here. Am I missing a driver or something?My Satellite canned extinguishing because of this, so I would really appreciate help :)
Best regards / Ocke
Post edited by: Ocke
Hmmmm... really strange. I use Win7 32 bit on my Satellite A300-1LI and it works perfectly.
Maybe a stupid question now, but have you tried to use the 32 bit version?You have also installed all the Toshiba drivers Toshiba value added package (includes the Toshiba power saver tool)?
Maybe you are looking for
-
Can the text indicating "See attachment" that appears in the body of an e-mail message edited?
When I join an e-mail text that says: "See annex" appears in the body of the e-mail message. I would like to change this text to say something else. I can't find where this text is stored in the settings, and I don't know yet if it is generated by th
-
Cannot start Toshiba Recovery Disc Creator on my Satellite A300 - 15K
Hello! I'm of the Poland if my English is a bit poor... (but I hope that's enough) My problem: I don't have a recovery (DVD) drive because I use earlier Recobery of Toshiba Disc Creator (when everything in my laptop was good). Now, I didn't make this
-
Print pegel. Bitte alle possibilities.
-
Option of film available, but does not work
When you choose a view in any folder with photos, I can choose "film". Until very recently, it worked well. Now, it seems, however, the preview pane is missing and all my pictures form a long horizontal "thumbnail" view top (similar to what is usuall
-
Vista - reformatting computer as it is slow
Re start/reformat * original title - my computer is slow. I want to restart / re format to clean the computer and re start getting some speed.__*