Satellite A300-1J1 - sound doesn't work only with Windows XP

I have a problem, yesterday I installed on my Toshiba Satellite A300 1J1 WindowXP, but no sound!

I tried all sound driver Toshiba on the Toshiba web site but no result!
Some can help us?

Hello

Your laptop is a Realtek audio chip. If you install a Microsoft hotfix before installing the drivers.

Check out these links:
http://support.Microsoft.com/kb/835221
http://support.Microsoft.com/kb/888111

Welcome them

Tags: Toshiba

Similar Questions

  • Corel PaintShop Pro Photo - X 3 doesn't work only with Windows 8 - pavilion laptop dv7,

    Hey guys,.

    I have a pavilion dv7 notebook, with Win8, and I am unable to load Corel PaintShop Photo Pro - X 3. Last time I was = d responsible for this program was with Win 7 and it worked fine.

    Corel has been preloaded on my laptop.

    Can someone help me.

    thanX

    Hello

    Yes, as mentioned above, is how software companies earn money.

    Kind regards.

  • copy paste doesn't work only with windows 7, office 10

    Copy / paste does not work in any office of 10 nor IE work or anything.

    I deleted the driver for my MS keyboard and re booted several times - nothing

    Not sure when this started, but it's been several months now.

    I tried sfc/scannow running, but that did not help either one.

    Any suggestions?

    Hello

    1. Modifications were made to the software or the hardware of the computer before the show?
    2. The problem is specific to the text copy and paste? Are you able to copy/paste the files in the folders?
    Method 1:
    Start the computer in Mode safe mode with network and check if the problem persists. See the link below and follow the steps.
     
    Method 2:
    Perform the check and the clean boot if this problem occurs. If the problem does not occur then determine the service that is causing the problem and consider to uninstall this application if you do not use. See the link below and follow the steps.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
     
    Note: After you have finished troubleshooting follow step 7, mentioned on the web page for the computer to boot into normal mode.
     
    Method 3:

    Try to create a new user account and check what is happening. To create a new user account, please refer to the link below and follow the steps.

    Create a user account
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
     
    If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  • RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

    RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

    RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

  • Satellite A300-1J1 - WLAN is not working after installing XP

    Hello

    I installed XP on my PC, but now I can not install the driver for my Wireless.
    I have install all of them, but always my wireless card does not.

    Are there any ideas including a driver I need - Realtec, Atheros and Intel?

    Hello!

    Satellite A300-1J1 has an Intel WIFI card, so you need an Intel driver.

    If you are looking for on the Toshiba driver download page you will find:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • DeskJet 722C works only with Windows 7

    OK, so I applied the DJ_Patch as described. (See http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-710-720-810-820-100-Series-prin... ) I have Windows 7, 64-bit and a HP Deskjet 722 C printer.  Tried to print the test page, but received the error from the printer.  Tried to add a printer, you are looking for the 722C, but it is not on the list, even tried to do Windows Update to search for my printer.   Tried to restart, which did not work or the other.  Still get error printer.  I appreciate any other suggestions.  BTW, the printer is connected via a USB to parallel port cable.

    My HP Deskjet 722C now works!  I spent several hours trying different things only to find out it was the cable use to connect the printer to our new computer.  He is there not a lot of info on the package of cable but if you watched closely he said it worked only with Win XP, me and Vista.  Who would have thought that the cable wasn't working with some BONE... me!  Once we went and bought a new cable ($40, Ouch!), we were running a few minutes.  I don't know that a cheaper cable is available online.

    I wanted to post this in the hope of saving someone money, time and frustration on the other.

  • SENTINEL HASP KEYS 3.25 WORKS ONLY WITH WINDOWS 7

    I lived several of these posts here about the hasp and windows keys 7 and I tried many suggested fixes, but nothing works. I installed the software using Windows XP Mode in Virtual PC, I've updated, uninstalled drivers, reinstalled with and without the hasp key inserted. I use the Sigmanest V4, Mastercam9, and Mastercam10 software. All three of these programs worked fine with Windows XP service Pack 3. I did everything that I mentioned above and some of which you try to run the software in compatibility mode. Nothing I try works, Sigmanest software seems like it is recognizing the hasp key because it will be open, but it will not open in demo mode. The two programs Mastercam do not even recognize the hasp key. They open up and say that there is no present hasp key, then close. After years that Windows 7 has been out someone got a solution for this. Maybe they have, but I can't?

    Hello Chad,

    Thanks for posting your query on Microsoft Community forum.

    According to the description of your problem, it seems that you are trying to install the drivers for the Sentinel 3.25 HASP key. I checked the official site, it shows drivers for Windows, but did not mention the version of Windows.

    Here is the link: http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP+HL&o=Windows&t=Runtime+%26+Device+Driver&l=all#.

    I also checked this device and software Center of Microsoft Compatibility, and I couldn't find any information out there in that regard. So I suggest you to contact technical support SENITEL for troubleshooting further because they are the best people who can say that this device is compatible with Windows 7 or not.

    Hope this information is useful. Do get back to us after contacting them and please update your question on the forum.

    Thank you.

  • HP cp1700 printer works only with Windows 8

    My HP cp1700 printer no longer works with Windows 8, but worked well with Windows 7. It is visible in printers and faxes, but displays always 'offline '. This utility is not correct the problem and I could not find any solution working on the forum. HP support reminds me of Windows drivers, which are installed. I uninstalled and reinstalled the printer with hard boots but I have always the same question. Any ideas?

    Problem solved with the driver HP CP1700 for Windows 8

    1 module printer via a usb cable to your pc

    2 turn on your printer and let windows to install the printer

    3. go to control panel of configuration, devices and printers, and locate the hp cp1700

    4. right click, properties, hardware, again, then click on to the left of the change settings tab

    5. on the driver tab, click roll-back of driver which previous version of 2012 at the 2006 pilot

    6 follow steps 3 and click on put updated driver and click search automatically and the winows 8 will find for the driver you on the internet and you will have all the features that have been installed for your printer in the end.

    Hope you enjoy this :)))

  • Flash CS4 works only with Windows 7 64-bit and Kaspersky Internet Security

    I have a new computer to core i5 Windows 7 64 bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 answers so that it is completely unusable. Uninstall KIS and it works quite well. I already read on another forum that someone of another encounter the same problem with the same combination of products. Does anyone else have this problem amd If Yes, how do you solve? I posted on the forum of Kaspersky without solution so far.

    Norton works OK with Windows 7 (64) and CS4?

    Your chance.  After a week of research I found someone who has thought about it.  Apparently his self-defense of Kaspersky which is causing the problem.  Under options disable control external sevice disable.  For me, that did the trick.  If it does not for you also try to disable self-defense under both options.  Once I did it was moving smooth again.

  • Music satellite A300 PSAG4A keys doesn't work do not

    Hello

    I am new to this forum and in fact Toshiba problems in general. : P

    I have a laptop Toshiba Satellite A300-PSAG4A running on Vista 32 bit. A few days ago the music keys Harman/Kardon lighting on it suddenly stopped working. When I use my cell phone, I usually put in mode 'sleep' and normally wake him using these support the keys - but for some reason, they stopped randomly light up and answer.

    I tried used - by restarting the computer laptop and test frantically buttons, but of course, they do not react. Keys and the laptop itself served very well up to now I can't think of any reason why this is happening now.

    I'm not super computer savvy but I did some reading on the subject of these keys and wanted to try to reinstall the Toshiba Value added Package method - but I couldn't find the PVAT file anywhere on my laptop.

    In addition, Toshiba does not offer support for my laptop computer series (A300-PSAG4A); their download section is only for the ST series. Please correct me if I'm wrong - I could be looking right or whatever.

    I did a system health report to check if it is a driver problem and it came with the following text:
    Error messages two affirming that "the device for the Base system device driver has not been installed" and the other saying that "the device driver for #UNKNOWN # has not been installed."

    I don't know that anyone say or if they are relevant to my problem.

    Help, please?

    > I'm not super computer savvy but I did some reading on the subject of these keys and wanted to try to reinstall the Toshiba Value added Package method - but I couldn't find the PVAT file anywhere on my laptop.

    Hi, you can download the VAP (value added package) for a Toshiba driver page.

    > Also, Toshiba does not offer support for my laptop computer series (A300-PSAG4A); their download section is only for the ST series. Please correct me if I'm wrong - I could be looking right or whatever.

    Surely, they do think you searched on a fake page the A300 PSAG4A seems to be an Australian series of Toshiba and therefore, you should check page driver Toshiba to THE.
    http://www.MyToshiba.com.au/support/download

    Here you should find the VAP

    Recommend to uninstall the first PPV, and after new reboot you could install the package again.

  • Satellite A100 (PSAA9A) - sound doesn't work - tried all of the obvious solutions

    I have a satellite A100 (not sure the model, but the model is PSAA9A-00S00F)

    The sound does not work, but I haven't used the noise for about 7 or 8 months ago.
    Mute is not on, all volume controls are ok.
    There is only the internal speakers.
    I downloaded the current drivers.
    Running Windows XP Pro.
    I did the Windows updates that I can find and made the process of troubleshooting through Windows.
    I'm out of warranty so wouldn't send away to get looked at unless absolutely necessary due to cost.

    The CD/DVD drive is not read, but the sound is not related to this, because it will not healthy for web content.

    Someone at - it other suggestions of what could be the problem?

    Thank you!

    Hello

    You reinstall Windows or only the sound suddenly stopped working?
    And the sound card is in the Device Manager? There are some yellow exclamation points?

    Before installing the new drivers, you must remove the old drivers first. This means remove the older version of the driver and the software, and then restart the laptop. Use CCleaner to clean the registry and restart. After this installation, the latest driver from Toshiba Europe page.
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, make sure you have these two installed Microsoft Hotfixes:
    AUDIO Patch1: Http://support.microsoft.com/kb/835221 KB835221
    AUDIO 2 Patch: KB888111 http://support.microsoft.com/kb/888111

    Welcome them

  • Satellite A300-1J1 - where to find the drivers for Windows 7?

    Could you please indicate the expected availability of the Windows 7 drivers for the laptop A300-1J1 (PSAG0E)?

    Thank you for your help.

    Hi Ratnose,

    At the moment the driver support didn't start for Windows 7 because it will be released this week on 22 October. Therefore wait a few more weeks. ;)

    Normally, you can get all the drivers on the Toshiba page:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    There are Vista drivers available already and you can try these drivers. The Vista drivers are also work on Windows 7.

  • On Satellite A200 (PSAE6E) FN key works only with Windows XP Home edition

    Hello

    I just get my Toshiba Satellite A200-2BH, (PSAE6E), included with windows Vista. I'm not comfortable with that OS so I formatted the hard drive and install win XP pro SP3 all seem to be fine with the driver downloaded from driver support Toshiba on the line, but the FN key do not work in certain combinations, for example:
    FN + F5 or + F6 or + F7 do not work
    someone say online in this forum that I should install updated BIOS, but this note on the Toshiba support website me resist:

    * "This Bios update adds functionality to your system *."
    * This Bios is NOT compatible for notebook computers equipped with Windows Vista! "*

    What should I do?
    My current setup is:
    Satellite A200 PSAE6E with WXP PRO SP3 with the FN key does not
    Should I install this update to fix this problem?

    Please help me with the path I should follow
    Thank you very much

    FN feature under Windows XP Home edition is supported with the latest version of the BIOS update. So don't be afraid. Download the right BIOS update and update Windows XP Home edition.
    Before start you BIOS updated to close all running applications and make sure that the laptop is connected to the power supply do not do this with battery power!

  • Programs work only with windows vista

    I've had nothing but trouble with my new computer and am more convinced, it's because of Vista.  Every program that I buy, which says compatible with vista doesn't work properly or at all.  The most recent is Adobe Photoshop Elements 7.  It worked 'ok' for a short period and now does not start at all.  I uninstalled and reinstalled several times, and I get the same message "not responding".  I bought other programs and had to take them because they would not work with vista.  I also have a lot of programs that I can't use because they are not compatible with vista.  When I bought my computer, I asked for XP and learned from Dell that it came only with Vista... What I want to know is can I get a refund for vista so I can get an operating system that works?  Thank you.

    There may be a problem with the operating system.  Programs you cite have no problems on my computer and I have not heard of them being problems on someone elses.

    XP has not been for sale for a few years.  Any refund is Dell.  What edition of Vista do you have?  You can use the recovery software and restore your computer as long as the plant and start over.

    Colin Barnhorst

  • Microphone works only with Windows 7 and StarCraft 2

    I have Windows 7 64 bit is installed on a computer HP Pavilion Elite (HP-M9600T), and I'm having problems to make my microphone to work with Windows 7 and Starcraft 2 (SC2).  The strange part is that I have an old analog microphone that works, but it's quality is very bad.  I bought 3 or 4 new microphones (some analog other USB) and none of them have worked.  I tried standalone and headset microphones.

    Whenever I tried a new micro, I went in the 'Sound' Panel and check that the microphone is not muted.  I check that the microphone level is high (and if mic boost is available I assure me that it is also at the top).  Then I test the microphone via the 'Listen to this device' feature in the properties of Microphone Panel and can hear my voice through my speakers when I talk.  I also see the green bar on the acoustic Panel fluctuate everytime I speak.  However, no one can hear me when I play StarCraft 2 unless I unplug the new microphone and plug the old microphone.  StartCraft 2 settings are configured to use the default device and StarCraft 2 also has a test feature of "Listen to this device" and I can hear my voice through the speakers.  Just like in the sound Panel, when I speak I can see the Soundbar of StarCraft 2 fluctuate in recognition of my voice.  However, only the old work of mic.  If my old microphone had a mute and better quality, I would ignore the problem.  However, this is not so I would get a new mic work.

    All the drivers seem to be up-to-date and indicate that they are working correctly.  I uninstalled and reinstalled StarCraft 2.  I also reinstalled Windows 7.  I used two generic drivers and installed the drivers RealTek supplied with my machine.  The two sets of drivers give me the same result.  I thought they might be in conflict, so I uninstalled the RealTek drivers, but I got the same result.  Teh generic drivers recognize my mic fine, but no one can hear me.  Any ideas?

    Hi tlonni,

    You can try the following steps and check if it helps to solve the problem.

    a. Click Start, click Control Panel and then double-click sounds.

    b. in the sound dialog box, click the recording tab, click on the microphone and then click Properties.

    c. click on the Advanced tab, click to clear applications to allow him to take exclusive control of this peripheral checkbox and then click OK.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for