Satellite A300-1LT - support WiFi Draft N?

care to say

Wireless technology: Bluetooth®
Compliance: Wi - Fi
Network support: 802.11a/g/Draft-N
Wireless technology: LAN (802.11a/g/Draft-N) wireless

It is 'real' standard n or something inbetween or is it just a / g?

Hi hrvoje_xyz,

According to the specs on the Toshiba site, it supports Draft N Wireless!

I put t know what you mean by something between a / g but he supported of the real project N. :)

Tags: Toshiba

Similar Questions

  • Satellite A300-1LT-cannot install the WLAN driver

    I have the Satellite A300-1LT with Windows XP x 64 on my system.
    Most of the drivers works fine, but I can't get the wireless to work.
    I tried all the drivers (intel, realtek, atheros) and nothing seams to work?

    Help, please!

    Hello

    The laptop supports the Intel (Intel WiFi Link 5100AGN) WLan card then you need to install the Intel WLan card driver.

    Using Windows XP 64 bit OS?

    Please check this page of Portal Toshiba WLan:
    http://APS2.toshiba-tro.de/WLAN/?page=downloads

    Here you can find a driver:
    Intel PRO/Wireless 3945/4965/5100/5300 XP 64 / 2000 11.1.1.16

    It should work!

  • Satellite A300 - 1LT PSAGCE - Cant get higher resolution at 1280 x 800 on external monitor

    I have toshiba Satellite A300 - 1LT PSAGCE and I plugged the monitor additional profeccional LP3065, but I can't get the 1280 x 800 resolution and it works on HDMI, via the VGA output, I get only a black screen.

    Any suggestions?

    It is always an issue with external screens. Most of them have very high native resolution, and because GPU performance limited to external displays, there is often a problem.

    Unfortunately, I was not able to find what is the max resolution for external displays, but your LP3065 has 2.560 x 1.600 as max resolution, right?

    Can you please tell us what OS you are using? The Toshiba support page display driver you are using.

  • Satellite A300-1LT - cannot write to SD card

    I had Satellite A300 1lt 5 months, everything works great. Until the day I could not write data to my microSD card. I use this card in my Samsung cell phone. I put it in an adapter SD, because of course its too small for Toshiba card slot. I see all the files on the card, but when I try to write it is said:
    "The disk is write protected. Remove protection or use another disk.
    I don't remember putting protection on my card. I also tried a different SD card, the result was the same. However, when I use XD cards, its fully capable access.

    Any ideas?
    I am running Vista SP2.
    When I put the card in my laptop, I can read/write normally.

    Hello

    Normally, when you look at the map at the top of the left side can be a write protection notch. If it is present, the card cannot be written to.
    Check this box!

    In addition, it would be interesting to know what SD card you use exactly because not all types are supported. I checked the user manual and the following cards will be supported:
    (Up to 2GB) SD card
    SDHC card (up to 16 GB)

    If you are using a microphone or min SD card it can be not supported!

  • Satellite A300-1LT - Webcam driver for Windows 7

    Hello

    I have a problem with my the right webcam driver after installing Windows 7 on my Satellite A300-1LT, I got win XP before and it works great. In downloads is available just for xp, vista 32-bit and 64-bit driver (I tried with the same results). Webcam app windows startup and gives me a msg of error that I have to reinstall or install new drivers of webcam. Webcam works for example. buth Skype with (very) poor quality.

    I tried to find wich cam comes (chicony?) also but nothing.

    Does Enyone else has experienced this problem and how to resolve? Help, please...

    Hi glava11,

    As far as I know that you can also use the Satellite A500 webcam driver because it s equipped of webcam Chicony too.

    So take a look for A500 downloads. There, you can find Windows 7 driver for webcam that should work on your model too.

    Check this box!

  • Satellite A300-1LT won't boot up - white screen & no HARD disk activity

    I had a problem, the touch pad does not work.
    I found on the internet solution to stop computer, take out the battery, wait a bit and try again.
    That's when my problems start.

    When I put the battery back on, I turned on the laptop.
    White screen (nothing happens), led indicators are on (except for the hard disk), cd drive tries to read but nothing happens and the fan is running.
    I tried everything I could find (wait 30 minutes, take out, start without battery battery, etc.) but no luck.

    My lap top is Satellite A300-1lt, and I got 2 months.
    I don't want to take it to the service, unless it is really necessary, because I really need now, I can't wait for weeks until what he returned.

    Please can someone help me out, Im desperate...

    Thanks in advantage...

    Connect your laptop (with battery) to the power supply and leave an hour, try to restart your laptop. If portable starting again let it run until the battery will be fully recharged.

    I hope that it will work properly again. I had a similar problem with my Satellite A300-1LI, and I do this. Laptop now works perfectly with or without adapter.

  • Re: Satellite A300-1LT - after display driver update, I get an error message

    Hi all,

    I have A300-1LT PSAGCE and a update my toshiba Download Center display driver.

    ATI
    Type display driver
    Mobility Radeon HD 46xx/45xx/43xx subtype
    Size (KB) 108950
    Version 8.611
    Model Satellite L550, Satellite L500, Satellite A300, Satellite Pro A300
    Operating system Windows Vista 32-Bit

    When I reboot laptop computer error showed:

    "The Catalyst Control Center is not supported by the version of the driver for your graphics to enable. If you please update your ATI graphics driver or enable your ATI card using the display manager. »

    Cannot find Manager displayer have only man of color. What should I do?

    Help, please!

    Thnx

    Hello!

    Well, for me it looks like you didn't uninstall the old display driver software. Before installing a newer version, you still need to delete the old version. So go in Control Panel > software. Select ATI display driver software and remove it. After restarting the laptop, you must clean the Windows system using CCleaner (Google is your friend to find it). Restart again and after that, you can install the latest version of page of Toshiba.

    I hope this works.
    Moreover, what graphics card do you have?

    Good bye

  • Satellite A300 - give up WIFI connection

    I recently bought a Satellite A300, but unfortunately it keeps down the internet WIFI connection while surfing the net.
    It's only recently, in the last 2 weeks and I did not install new software that can do this.

    I have a connection by wireless modem netgear aged 12 months which is connected to my main computer (wireless).
    I use a secure connection which needs a wep key and is compatible with Windows Vista.

    I also use this connection for my laptop from a different manufacture that I have no problem with. I also have Wifi on Wii and Xbox so I was wondering if there could be interference. Xbox Cup connection also.
    I have only 2 related both objects and they are not even in the same place or even near each other...

    When I diagnose the problem it says weak signal, but the intensity of the signal on the computer shows excellent.
    If I plug the ethernet cable then everything works fine.

    Very puzzled as to why this happens, having run checks virus on computers and nothing.
    Uninstalling the connectivity doctor, still no joy.
    All that it suggest that there is problem ISP but given that I can connect to my other laptop and desktop PC and no problems so do not know if it is...

    Can someone help, I'm not very technical and am now very mentally drained

    Thank you

    Hello!

    First of all, you must update your WLAN driver. You can find it on the Toshiba site:
    http://APS2.toshiba-tro.de/WLAN/

    He recommended to disable some options that could have an impact on the energy-saving WLAN functionality.
    In your case I would deactivate the energy saving WLAN and maybe this document option is useful for you
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

    Good bye

  • Satellite A300 - Help Support and Windows Vista does not work

    Hello

    I have a Satellite A300 that had Windows Vista Home Basic pre-installed.
    When I click on the Windows Vista Help and support help windows appear, but an error message box pops up that says page Web is no longer valid.
    The Help window opens blank with the mode circle cursor.

    How should I do?
    Thank you.

    When you open help and Support your laptop is connected to the Internet?
    If this is not the case, try to open it with an Internet connection.

  • Satellite A300 - 1LT T5800 - failure HDD needs to be replaced for

    Hi all

    The hard drive on my Toshiba A300-1LT failed, I need to replace it and I can't find any technique of the broken disk.
    Are there readers recommended for the A300-1LT.
    May I appreciateif you could help me.

    Thank you

    The warranty is still valid?
    Please do not invest your money if the warranty is valid. Contact nearest authorized maker Toshiba and let check the HARD drive.
    With valid warranty the HD should be replaced free of charge.

  • Is Satellite A300-1J1 supports the SDHC memory card

    Hello

    I have a laptop satellite A300-1J1, and I was wondering if it will work with SDHC cards.

    Some kind person could tell me if I can use them in this laptop model.

    Thank you.

    That means the user manual says?
    I know what it says.

    It says you can use the SDHC 4 GB to 16 GB card

    Welcome them

  • Satellite NB10t-A02C supports wifi Atheros AR9565 chipset

    Hey guys,.

    I'm looking at buying a new NB10t-A02C mainly to work on Linux (Debian). I was hoping someone could confirm that this particular model uses wifi Atheros AR9565 chipset. Apparently, some use an Intel wifi chipset but I can't confirm one way or the other regarding this model of the Australian market.

    Thank you very much for your time & help.

    Mez

    Is the complete model of the Satellite NB10t-A02C number: PU141A-02C03V
    Google gives a few hits about this model of Toshiba Satellite NB10t and it seems that this unit was equipped with the module WiFi Atheros (not Intel).

  • What kind of SATA Satellite A300 - 27Q support

    Hello.

    _1st. _
    I would like to know if my Toshiba A300 27 Q * has a * main card that supports SATA2 or only supports SATA1.

    I know that it has installed a HDD of 250 GB Sata1 and I think to install a 500 GB SSD, but I read that the support of main card SATA2 doesn´t it is isn´t to put an SSD.

    _2nd. _
    If my laptop computer wouldn compatible SATA2, I have difficulties to install an SSD?
    Would this work slowler, the same, or faster than my HD?

    Thank you and sorry for my bad English.

    With respect to question 1)

    I think that the drive HARD laptop s controller supports only SATA I (SATA 150)
    But I'm not quite sure on this standard controller, and that's why I recommend you to start Notepad using the Hirens Boot CD this disc Mr. start the laptop and provides various diagnostic tools that would help you to get more details on the pieces of equipment as well as the HARD disk controller.

    With respect to question 2)

    The SATA standard is completely compatible.
    This means that you can use a SATA II SSD drive in the common framework of the SATA controller.

    I did similar upgrading. My SATA I controller uses the SSD SATA II (SATA300), but of course, it does not reach readers (SATA300) full SSD performance. However, the performance gain and the improvement is noticeable and it s very good decision to move from the HDD to the SSDd shore

  • Satellite A300-1LT - I have to manual activate HDMI sound

    Hi all,

    This program (Manager of HDMI) do not work for me, I have to manual activate HDMI sound and when I want to connect or disconnect the display they do not recognize when I plug in the cable.
    So everything has manual (centar media connect display...)
    Install and uninstall the progam does not help...

    Thanx

    Hello!

    Have you tried to update the Manager of HDMI and sound card? Time you can find the Toshiba site and maybe market so try:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Last but not least I founded this Toshiba document and perhaps that it s useful to you:
    http://APS2.toshiba-tro.de/KB0/TSB8B02HW0000R01.htm

    Good bye

  • Satellite A300-1lT - I want to restore Vista with recovery option

    Hello world

    With my Toshiba nothing but problems. First of all, I waited replacement screen for months cause it wasn t all at the warehouse. K, after that I went down to XP but pilot are buggy, sound is poor, cannot get USB 2.0 to work, the system is slower that Vista so I decided to go back to Vista.

    But of course, there is no DVD so I need to restore via the restoration of HARD drive folder that I have. But cool, Toshiba doesn't let me to download the utility to create a backup DVD. So what can I do? I have HDD Recovery folder, how now create DVDs without utility that first of all they gave me.

    PS.
    You can say s not Toshiba fault; you did that blah blah. Of course, but first I waited replacement screen, I have original Vista DVD by wasn t given, I can't even download Toshiba utility. What sad piece of equipment. I have the experience, my first OS installed was BACK and Win95, many OS installation, after that, but I install back my OS in 2009 would not be hoping that its going to happen.

    All the ideas you good ppl

    Sorry mate, but in this case you need a new recovery disk. The HDD Recovery folder is not useful to you because you do not have Windows Vista and as you already know that the Toshiba recovery disc creator cannot be downloaded.

    You must order a new disc of a Toshiba authorized service provider directly:
    [https://backupmedia.toshiba.eu/landing.aspx]

    To be honest, this is not a problem of Toshiba. If you start the laptop for the first time, you get the following message and should not be ignored:

    + Important INFORMATION +.

    + your system is equipped with a hard drive recovery system. If you need repair.
    + your computer in the restaurant to original factory State, you can do it directly.
    + HDD (press F8 when you start your computer, choose "Repair your computer" +)
    + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

    + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
    + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
    + Gets severely damaged.

Maybe you are looking for

  • Satellite L500-1U7 - how do I clear CMOS?

    Hello everyone!I have a problem with a laptop Toshiba Satellite L500-1U7.He was blocking down by himself for a reason, and started after the reinstalling with W7 clean blue screens content poping up. I wanted to test the memory and HARD drive with so

  • HP ENVY m6 (m6-1205dx: wireless card update)

    OK, I bought a wireless card on ebay attesting sound of an HP laptop. I'm a total noob to this, but I catch on fast. Someone I know said make sure that it is supported by your laptop. I listened to and didn't at the same time. I received the card. I

  • issue of Windows Update KB967715

    Hello Robert, I finally make this post into a new thread. So please, I need help, I am about to go to the hospital, my family needs of the computer for the study.  I can't get my new post into a new thread... Here's what I typed to m y new topic: Hel

  • Key errors

    Aspire 5830TG. Download Windows 10, although it is perhaps a coincident, have lost since the pound sign which now prints #, the ' and @ who now two-way function.» Far as I can tell no other keys have changed function. Ideas please

  • white connector pane programmatically set

    OK, I found this: > To use the call by reference for the screw with the different, unknown Connector components,. > methods Get/SetControlValue to set the inputs & outputs instead of wiring > to the call by Ref-connector pane; and force the screws co