Satellite A300 - 1LT T5800 - failure HDD needs to be replaced for

Similar Questions

• Satellite A300-1LT-cannot install the WLAN driver

  I have the Satellite A300-1LT with Windows XP x 64 on my system.
  Most of the drivers works fine, but I can't get the wireless to work.
  I tried all the drivers (intel, realtek, atheros) and nothing seams to work?

  Help, please!

  Hello

  The laptop supports the Intel (Intel WiFi Link 5100AGN) WLan card then you need to install the Intel WLan card driver.

  Using Windows XP 64 bit OS?

  Please check this page of Portal Toshiba WLan:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Here you can find a driver:
  Intel PRO/Wireless 3945/4965/5100/5300 XP 64 / 2000 11.1.1.16

  It should work!

• Satellite A300-1LT won't boot up - white screen & no HARD disk activity

  I had a problem, the touch pad does not work.
  I found on the internet solution to stop computer, take out the battery, wait a bit and try again.
  That's when my problems start.

  When I put the battery back on, I turned on the laptop.
  White screen (nothing happens), led indicators are on (except for the hard disk), cd drive tries to read but nothing happens and the fan is running.
  I tried everything I could find (wait 30 minutes, take out, start without battery battery, etc.) but no luck.

  My lap top is Satellite A300-1lt, and I got 2 months.
  I don't want to take it to the service, unless it is really necessary, because I really need now, I can't wait for weeks until what he returned.

  Please can someone help me out, Im desperate...

  Thanks in advantage...

  Connect your laptop (with battery) to the power supply and leave an hour, try to restart your laptop. If portable starting again let it run until the battery will be fully recharged.

  I hope that it will work properly again. I had a similar problem with my Satellite A300-1LI, and I do this. Laptop now works perfectly with or without adapter.

• Satellite A300 - 1LT PSAGCE - Cant get higher resolution at 1280 x 800 on external monitor

  I have toshiba Satellite A300 - 1LT PSAGCE and I plugged the monitor additional profeccional LP3065, but I can't get the 1280 x 800 resolution and it works on HDMI, via the VGA output, I get only a black screen.

  Any suggestions?

  It is always an issue with external screens. Most of them have very high native resolution, and because GPU performance limited to external displays, there is often a problem.

  Unfortunately, I was not able to find what is the max resolution for external displays, but your LP3065 has 2.560 x 1.600 as max resolution, right?

  Can you please tell us what OS you are using? The Toshiba support page display driver you are using.

• Satellite A300-1LT - cannot write to SD card

  I had Satellite A300 1lt 5 months, everything works great. Until the day I could not write data to my microSD card. I use this card in my Samsung cell phone. I put it in an adapter SD, because of course its too small for Toshiba card slot. I see all the files on the card, but when I try to write it is said:
  "The disk is write protected. Remove protection or use another disk.
  I don't remember putting protection on my card. I also tried a different SD card, the result was the same. However, when I use XD cards, its fully capable access.

  Any ideas?
  I am running Vista SP2.
  When I put the card in my laptop, I can read/write normally.

  Hello

  Normally, when you look at the map at the top of the left side can be a write protection notch. If it is present, the card cannot be written to.
  Check this box!

  In addition, it would be interesting to know what SD card you use exactly because not all types are supported. I checked the user manual and the following cards will be supported:
  (Up to 2GB) SD card
  SDHC card (up to 16 GB)

  If you are using a microphone or min SD card it can be not supported!

• Satellite A300-1LT - Webcam driver for Windows 7

  Hello

  I have a problem with my the right webcam driver after installing Windows 7 on my Satellite A300-1LT, I got win XP before and it works great. In downloads is available just for xp, vista 32-bit and 64-bit driver (I tried with the same results). Webcam app windows startup and gives me a msg of error that I have to reinstall or install new drivers of webcam. Webcam works for example. buth Skype with (very) poor quality.

  I tried to find wich cam comes (chicony?) also but nothing.

  Does Enyone else has experienced this problem and how to resolve? Help, please...

  Hi glava11,

  As far as I know that you can also use the Satellite A500 webcam driver because it s equipped of webcam Chicony too.

  So take a look for A500 downloads. There, you can find Windows 7 driver for webcam that should work on your model too.

  Check this box!

• Re: Satellite A300-1LT - after display driver update, I get an error message

  Hi all,

  I have A300-1LT PSAGCE and a update my toshiba Download Center display driver.

  ATI
  Type display driver
  Mobility Radeon HD 46xx/45xx/43xx subtype
  Size (KB) 108950
  Version 8.611
  Model Satellite L550, Satellite L500, Satellite A300, Satellite Pro A300
  Operating system Windows Vista 32-Bit

  When I reboot laptop computer error showed:

  "The Catalyst Control Center is not supported by the version of the driver for your graphics to enable. If you please update your ATI graphics driver or enable your ATI card using the display manager. »

  Cannot find Manager displayer have only man of color. What should I do?

  Help, please!

  Thnx

  Hello!

  Well, for me it looks like you didn't uninstall the old display driver software. Before installing a newer version, you still need to delete the old version. So go in Control Panel > software. Select ATI display driver software and remove it. After restarting the laptop, you must clean the Windows system using CCleaner (Google is your friend to find it). Restart again and after that, you can install the latest version of page of Toshiba.

  I hope this works.
  Moreover, what graphics card do you have?

  Good bye

• Satellite A300-1OM webcam failure

  A week ago the notebook above had a motherboard (fried component) failure while I was on Skype with my webcam in use. A technician managed to fix the motherboard and the laptop is now fully operational with the exception of my built-in webcam which are more detectable by the computer.

  The technician suggested that he may have forgotten to cut the cable of the webcam in his motherboard slot when put the laptop back together. Since I'm capable of dismantling of the majority of my laptop, I want to check it myself to save time two round-trip to the store of the computer again. Does anyone know where I should look in Notepad (illustrations would be great) to check the connection of the webcam with the rest of the computer?

  If not, would it be possible that my webcam broke during the original motherboard failure since it was used during the failure of my motherboard? I also checked for drivers to update on the toshiba site, but could not find one for my laptop for Windows 7 64 bit.

  Note, I got Windows 7 64-bit before the crash so I don't think that this is a software problem as for many other Webcam A300 problems posted on this forum.

  Thanks for reading, I hope you can help!

  > Does anyone know where I should look in Notepad (illustrations would be great) to check the connection of the webcam with the rest of the computer?

  Because the webcam is a part of the cover frame and all the cables would be placed behind the plastic cover, you need to remove the cover to access the cables but don t ask me for more details because I m A300 not owner but only the U400 which is equipped with this webcam too

  However, in your case I would risk any damage to laptop, which can happen due to bad disassembly!
  It is perhaps best to s to make a short trip to the service.

  > If not, would it be possible that my webcam broke during the original motherboard failure since it was used during the failure of my motherboard?
  It is also possible, but in this case, the technician who replaced the motherboard should be responsible for this

• Satellite A300-1EG - why do I need 2 recovery discs?

  Hello
  I have a Toshiba Satellite A300 - 1EG.

  I created 2 discs recovey such as required in the "Toshiba disc Creator Recovey". I created the premiera (disc 1) 2 weeks ago and the second (disk 2) today because I didn't have 2 DVD in hand.

  My first question is t - it is important if I left a period of time between the two creations that will affect the recovery if I ever need to use them?

  My second question is to make two just recovery disks recover the operating system for example: Windows Vista or they recover what was recorded on the Local C drive, at the time they were created?

  My last question is if that happens my dies of an operating system, I make just to turn on the laptop and put it in recovey disc 1, then 2, (if this isn't how someone can you please tell me how to?)

  Concerning

  Hello

  When you use Toshiba Recovery Disc Creator you can see there the option for the use of different blank media. On some laptops, that image can be burned to a blank DVD and on some models, you need two of them. It depends on the recovery image.

  For my Satellite A300, I used both DVD-R virgins. I created images of recovery for several laptops, and we don't have me break creation of recovery and continue later. When the first media is finished you need to place the second piece of blank media and burning process will continue automatically. As far as I know that there is NO option for creating discs 2 only. Please be careful about this.

  I recommend you to get two empty DVD - R blank and create DVDs from recovery at the same time.

  When you use recovery DVD is removed from the entire HARD disk, not only partition C. This means that all the data saved on the HARD disk will be deleted. If your laptop has two HARD drives the recovery procedure will affect only HDD1. Be careful about this, and before you begin the recovery procedure back up all your important data.

  Follow a definitive answer to the final question ;) when you want to install the OS by using recovery media:
  Power your laptop running and press F12 to display the boot options
  Put the 1 recovery media in the optical disc drive
  In boot options, choose the CD/DVD drive and press ENTER
  Follow the menu on the screen

  Of course, start with DVD1 and questioned insert second DVD.

• Satellite A300 PSAJ4E - BIOS V3.90 - need full file name

  Hello

  Could you please tell me the original * file name * BIOS * V3.90* for Satellite A300, short model No.: PSAJ4E for Vista * x 64 *.

  A big thank you to you all,.

  Best regards
  Operating system

  Hello

  Why you need the full name of the file BIOS 3.9?
  It s not on the download page, because a newer version of the BIOS was downloaded
  Even if you know the complete file name, you would not be able to download

  Only the latest versions of BIOS are ready to download!

• Satellite A300-1 MB card mother needed part number

  Can give it please for me the reference number of the Satellite A300-1 MB motherboard?.

  Thank you.

  I put t think anyone here will be able to help. Still is it that you need motherboard for model PSAG8E.

• Satellite A300 - partial keyboard failure

  I have a very unusual problem. some keys on my keyb have stopped working.
  from top to bottom, these:
  [0] [']
  [p] [e]
  [o]
  [-]
  [space]

  my laptop is a Satellite A300
  the bios is updated.

  Is it possible that this is not a hardware problem?

  Thanks for the help.

  I think that its hardware problem.
  To confirm this, connect an external USB keyboard and test functionality.
  If it's working properly, your internal keyboard is the troublemaker.

• Satellite M30X-165 - broken HDD, need to be replaced

  Hello

  2 years and a few months after I bought the M30X 165, the hard drive has some corruptions (it's a Hitachi drive) and the tool manufacturer for consistency checking shows some errors. Hitachi offers a three-year guarantee for these hard drives (Travelstar).

  1 but I guess that it is not possible to get the replaced disk (because I bought it with the Toshiba system). Fix?
  2. what would be a good replacement for the reader? [Http://westerndigital.com/en/products/Products.asp?DriveID=346] is a?

  > 1. But I guess that it is not possible to get the replaced disk (because I bought it with the Toshiba system). Fix?
  To my knowledge the laptop is covered by the warranty for a year. If you register on the page of Toshiba notebook you could get an extra year warranty (2 years total).
  If pieces of hardware will die after the warranty expires, you pay for the replacement.

  > 2. What would be a good replacement for the reader?
  The laptop supports the IDE if you buy and IDE HDD.
  In addition, you must make sure that the size of the HARD drive is supported by the BIOS.
  In my opinion the 250 GB not are just too. Try a 120 GB. I think that it should be compatible.

  Best regards

• Satellite A300-145 back still not update the display drivers for Vista 32

  (1) Intel published the new driver for internal and accelerator graphic GM965 Express X 3100 integrated in Toshiba Satellite A300-145

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProductID=2879&DwnldID=1693 9 & lang = fra

  new version is 15.11.2 for Vista 32, but this Milkeficent I can not install - program say that ' it's driver is not check for you unit - call to make the device "-what is a problem?

  but on [to Vista drivers Toshiba support page: http://ru.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&mode=allMachines&userOS=& action = search & SelCategorie = 2 & selFamily = 2 & selSeries = 153 & selProduct = 781 & selShortMod = 694 & selOS = 26 & selTyp e = 11 & country = 30 & language = 34 & search =]
  still OLDER version 7.14.10.1329 (without OpenGL 2.0 support)
  -When can I update my display driver for version 15.11.2?

  (3) as the 3Dmark Vantage you say "back to video card not supported DirectX 10" - what is a problem?

  Toshiba Satellite A300-145 (PSAJ0E)

  :(

  Thank you all!

  Hello

  Is this your first laptop?

• Satellite A300-1lT - I want to restore Vista with recovery option

  Hello world

  With my Toshiba nothing but problems. First of all, I waited replacement screen for months cause it wasn t all at the warehouse. K, after that I went down to XP but pilot are buggy, sound is poor, cannot get USB 2.0 to work, the system is slower that Vista so I decided to go back to Vista.

  But of course, there is no DVD so I need to restore via the restoration of HARD drive folder that I have. But cool, Toshiba doesn't let me to download the utility to create a backup DVD. So what can I do? I have HDD Recovery folder, how now create DVDs without utility that first of all they gave me.

  PS.
  You can say s not Toshiba fault; you did that blah blah. Of course, but first I waited replacement screen, I have original Vista DVD by wasn t given, I can't even download Toshiba utility. What sad piece of equipment. I have the experience, my first OS installed was BACK and Win95, many OS installation, after that, but I install back my OS in 2009 would not be hoping that its going to happen.

  All the ideas you good ppl

  Sorry mate, but in this case you need a new recovery disk. The HDD Recovery folder is not useful to you because you do not have Windows Vista and as you already know that the Toshiba recovery disc creator cannot be downloaded.

  You must order a new disc of a Toshiba authorized service provider directly:
  [https://backupmedia.toshiba.eu/landing.aspx]

  To be honest, this is not a problem of Toshiba. If you start the laptop for the first time, you get the following message and should not be ignored:

  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.