Satellite A300-1ND - cannot copy files to the CD/DVD drive

Similar Questions

• Cannot copy files to the CD/DVD to the computer.

  Original title: new problem - cannot use Cd/DVD to open files I can do now?

  I tried to re - install My Documents to my computer.

  Now, my computer has a CD FULL of Documents recorded,

  but does not open what can I do?

  Need repair help

  Hi encourger,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not copy the documents on your computer on the CD/DVD. Please correct me that I misunderstood.

  encourger, I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  We start with the General troubleshooting methods mentioned in the article below.

  Method 1:

  Step 1: Perform safe mode

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Please complete all of the steps recommended, reviewed the reference articles and if after following the reference and the articles number methods persists, please go back to us and we will be happy to provide you with additional options available that you can use to get this problem is solved. In addition please provide us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What Version of Windows you are using (Windows XP, Vista, 7)?

  2. What is the number of brand and model of your computer?

  3 did you change on your computer before the show?

  If you are unable to perform the steps mentioned in the link I recommend you to contact our live support by clicking on the link http://support.microsoft.com/common/international.aspx?RDPATH=dm;en-us;selectassist&target=assistance

  Hope this helps!

• Cannot copy files from the old hard drive to new

  Original title: crash and recovery of hard drive problem

  My hard drive crashed it wouldn't boot saying config.sys is damaged or corrupted, I tried to fix it but the sector is damaged. I was using XP, I had a password on my settings. I installed a new hard drive and reinstalled windows XP, but even if I can 'see' the old hard drive (always installed) I can't access my documents, how can I get to them? I know the password but since its an account on another drive it won't give me the chance to log on to the account.

  Assuming that you use the Encrypting File System (EFS) then this article should solve your problem:

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• I can't open 14 items installation file from the CD/DVD drive shared on my iMac to my MacBook Air.

  I can't open 14 items installation file from the CD/DVD drive shared on my iMac to my MacBook Air.  I'm getting "can't open the application 'Install' because it may be damaged or incomplete."  The drive is new and I have installed and registered on the iMac smoothly with Adobe. There is no sign of physical damage to the disk.  I did previously with Elements 9 without problem.  Any suggestions please?

  Try to download the installation files instead of using the drive.

  PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  PE 10, 11, 12, 13, 14 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html

• Cannot copy files to disk Sony DVD - RW DRU830A

  Manager of SEV idndicates car works; Sony reader reports online diagnostic tool reads and writes projperly; I can burn DVDs for video editing software. I can't copy - paste, or drag a file on the disk.  Windows reports the disk is full or not write able and MSFixit reports drive is not capable in writing.  This happened after upgrade Sony firmware SS25 level.

  Hi Firstetq,

  Step 1

  I suggest you to check if recording is enabled on your DVD player. To do this follow the steps below:

  a. Click Start.
  b. open computer.
  c. right-click on the cd or dvd drive.
  d. click on properties.
  e. click the recording tab.
  f. ensure that the recording on this drive box CD enable is selected.
  g. click ok.

  Check if you can burn the disc.

  Step 2

  Try to create a restoration system manually, so that in this case, a problem occurs when executing these steps, you can always perform a system restore.

  Remove the CD/DVD drive device manager and restart the computer.

  1. Click Start and click on run
  2. In the run box, type devmgmt.msc, and then on enter.
  3. In Device Manager, expand CD-ROM/DVD-ROM readers
  4. Right-click on the CD / DVD is installed on the computer and click on uninstall.
  5. Close Device Manager, and then restart the computer.

  When the computer comes back to check if you can burn the disc with an error.

  Step 3

  If the steps above do not help, you try to restore system to the date before the update of the firmware has been installed.  To restore the operating system to an earlier point in time, access the link below.

  http://support.Microsoft.com/kb/306084

  Restart the computer in normal mode and check if you can burn the disc.

  If the problem persists, you may contact technical support for sony to check how to uninstall the update firmware and it helps to uninstall it and check it.

  Link to contact the Sony Support:http://esupport.sony.com/US/perl/support-contacts.pl

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• cannot play media in the cd/dvd drive (hl-dt-st DVD - RW gwr - 466 b)

  problem with media in the cd/dvd drive cd/dvd drive (hl-dt-st DVD - RW gwr - 466 b) will not read CDs/DVDs

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. what exactly happens when you try to read any CD/DVD? You get the error message?

  Try to run the fix it tool to the article below and check.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  See also the section below.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641

• Cannot delete files from the external hard drive after copying using Robocopy

  Original title:! VERY DIFFICULT QUESTION! Files that cannot be deleted!

  I did a robocopy and he left during the night and when I came back it was in some kind of loop and my external hard drive was full. The files are not visible in Explorer and if I try to delete them in the command line that fails because some are too long. Urgent I need to redo the space on this external and copy the files to my parents and charity before fly me soon. Please can someone help me.

  * Looks like that I have multiple instances of the same files

  I don't know if you will be able to do this before your flight, but the drive must be partitioned and formatted, reformatted, or scanned for errors of NTFS file allocation table with repairs enabled. Depending on the size of the disk, this could take some time. You can also check statistics of SMARTDRIVE with a utility like Crystal Info disc to see if it is a failure.

  If you do not drive Professional recovery tools available, the native CHKDSK will do in a pinch.

  C:\Windows\System32>chkdsk /?
  Checks a disk and displays a status report.

  [CHKDSK [volume [[path] filename]]] [/ f] [/ v] [/ r] [/ x] [/ I] [/ c] [/ l [: size]] [/ b]

  volume Specifies the drive letter (followed by a colon),
  mount point or volume name.
  filename FAT/FAT32 only: Specifies the files to check for fragmentation.
  /F fixes errors on the disk.
  /V FAT/FAT32: displays the full path and the name of each file
  on the disk.
  On NTFS: Displays the eventual cleanup messages.
  /R Locates bad sectors and recovers readable information
  (implies / f).
  L:size NTFS only: changes the size of the logfile to the specified number
  of kilobytes.  If the size is not specified, displays currently
  size.
  /X force the volume to unmount it first if necessary.
  All open handles to the volume would then be invalid
  (implies / f).
  /I NTFS only: performs a less vigorous check of index entries.
  /C NTFS only: skips, checking of cycles within the folder
  structure.
  /B NTFS only: Re-evaluates bad clusters on the volume
  (implies / r)

  The /I or /C switch reduces the amount of time required to run Chkdsk by
  skip certain checks of the volume.

  Any routine review and car repair will take time. CHKDSK is no exception.

• Error during the installation of Windows Search 4.0, 'an error occurred during the file copy Search.adm. Cannot copy file in the destination directory. »

  • Configuration displays error "check the log (C:\WINDOWS\KB940157.log) file.
  • Log file includes the following error - 108.625: VerifySize: could not get the target size of the file: C:\WINDOWS\system32\GroupPolicy\ADM\Search.adm

  No idea how to address this sort of WS4.0 installs?

  INTELLECTUAL PROPERTY

  Hello

  You made any hardware or software changes the computer recently?

  You have Service pack 3 is installed? If not, install Service Pack 3 first, and then try to install Windows Search 4.0.

  Try these steps and let me know the status.

  Follow the suggestions given by dbrockus from the link given as dated Wednesday, February 4, 2009:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdesktopsearchhelp/thread/f8882314-da75-4142-a889-50c1983dc1e8

  Also, see this Microsoft article on how to take the permissions of a folder: http://support.microsoft.com/kb/308421

  I hope this helps.

• Satellite A300 - series stereo Mix unavailable with the Conexant audio driver

  Hello...

  I have laptop Toshiba Satellite A300 PSAJ0E...
  I was using Windows XP Professional...

  But I'm not able to use Stereo Mix so special...
  I installed the Driver Conexant HD SmartAudio 221...

  What can I do in this topic...

  I thank right now...

  Best regards...

  Unfortunately, but you can not do much
  The point is that it is a Conexant audio driver problem. This option or parameter is simply not available in the Conexant audio driver and as a result the port of stereo mix is not available and cannot be used.

  I don't think a driver update audio can help so expect an update.

  Cheers mate

• Cannot copy files in Canvio external HARD drive 3 TB

  Hello

  I bought this years old and have tried to market several times without success.
  She appears as a device, but when I try to copy files to it, they do not go on it.

  I am running windows 8. Intel i7 3770 k.

  Would be grateful for any help please,
  Thanks Lucia

  Have you tried to format the HARD drive first?
  Do this. Change the NTFS file format and try to copy the files once more.

• Cannot copy files to CD or DVD + RW drive

  I tried several types of disc but am find me suddenly unable to write / copy files on a DVD or a CD. I use a HP with XP desktop computer. This problem started last night. When I put in a disk, it reads. I clicked on properties, then go to AutoPlay. I choose, for example, a content type - I'll click on say, mixed content, and ok. Everything I do or choose here, it will not save. I hit the Restore Defaults and it does nothing. In Windows Explorer, instead of inscription on the list DVD + RW and whateer in car, it displays an image of a disc with the date and the E drive.

  Any ideas on how I can fix this so I can copy files to my DVD discs?

  Hello

  Try the steps below. Guilbert

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; Q316529

  Chyavan

• Satellite A205: Vista & BIOS does not recognize the CD/DVD drive

  After a crash of the sudden family Vista system premium on a Toshiba Satellite A205 the system does not recognize the DVD CD - RW drive. Neither in Explorer, Device Manager, nor BIOS.

  Laptop is only a few months old.
  Have you tried the Toshiba check system - it ignores DVD disk check.
  Tried Windows Update - does not help.
  Tried registry fix - does not help.

  Cannot use the CD to reinstall all drivers - because it is not recognized.
  The DVD drive LED is on. If the disk looks ok physically.

  Does anyone have an idea what to do?

  Very strange what s
  Try this:

  Access the BIOS and set the default settings and save the changes.
  If it doesn't help then I put t see any other possibilities for contact ASP in your country for a CD/DVD drive control and possibly a replacement

  You said that the notebook is only several months old so I assume that the warranty is still valid and that's why everything has to be done for free

  Good luck my friend

• Satellite L650-16w - cannot run game using the old GPU driver

  first of all I had to say that my English is not very good, so if there is a German support it would be easier for me to write with German support.

  2 weeks ago, I bought a new toshiba Satellite L650-16w.
  After installing my favorite game, I'm trying to start this game, but I can't because of this error message: "3DGM gm_OpenGLError, param err error:"not enough memory"", last error win32 #8 "»

  After that, I tried the latest driver and installed the driver version 8.723.2 on the home page of toshiba, the amd driver does not work, but the error is still there.
  I tried many things but I wasn't able to run this game on my computer.
  I'm sure it's a problem with the driver because when I uninstalled the drivers launched the game! (there was only the installed windows vga drivers).
  Unfortunately, I had a low fps rate of relay with windows drivers, so I was unable to play this game without the pilots.

  I hope someone can help me to launch this game and there is no solution to run this game on my pc.

  My oem is windows 7 64 bit, and Yes this game still works on win 7 64 bit because I got to play this game on an another win 7 64 bit system.

  Hello

  Usually, you should always use Toshiba driver because drivers are supported for GPU overheating protection.
  If you want to use other drivers, then you can do this at your own risk.

  I googled a bit and found two pages that provide updated ATI drivers the:
  www.OmegaDrivers.net/
  www.laptopvideo2go.com/

  Perhaps one of the pilots of the mentioned pages would you play this game for sure.

• Cannot delete files on the external hard drive USB

  There are records that I can not delete on my external USB hard drive that I'm starting to suspect are connected to Windows updates related to Visual Studio who fail everytime I try to apply (this is another question I've waited in vain an answer for on Microsoft Connect).  These files have names like f95b13d78bd4c3a41d86.

  Here is an example of the message that I get trying to delete these folders:
  You need permission to perform this action.
  You need permission SYSTEM to make changes to this file.
  EULA.rtf
  etc, etc.

  Hello

  1 are logged as administrator?

  2 have you tried to delete the folder as an administrator?

  3. are you facing problems with Windows update?

  Method 1:

  I suggest to fully appropriate the folder and then try to delete.

  a. right click on the folder, and then click Properties

  b. click the Security tab

  c. click on Advanced, then the owner tab

  d. click on Edit, then your user name (make sure to check replace the owner of containers under..)

  e. click apply, then OK

  f. now, under permissions, click change permissions

  g. click Add, and then type your user name and click OK

  h. check the box allow under total control, and then click OK

  i. now, choose it replace all the child permission checkbox

  j. click OK, then apply, then on Close.

  Reference:

  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

• Satellite Pro A120: How do I remove the CD/DVD drive

  I have 2 main problems and doesn't seem to completely open the case.
  Does anyone know how to remove the dvd - rom?

  But my mainproblem is swith power Ribbon (blue) has come off the motherboard. But as I can't open completely the case im with tweezers for trying to recconect.

  Does not seem to want to go.
  Is there a clip into the connector on the motherboard or is it just push in? A picture or a diagram would be helpful.

  Any help would be appreciated.

  Thank you

  One question; Why are you doing this?
  I mean why you want to open the notebook?
  Always it is that Satellite Pro A120 is not an old notebook and I presume that the guarantee is valid.
  If you remove the lid of the laptop, you will lose the warranty!

  The removal of CD/DVD is very easy.
  Usually, it is fixed with a screw located at the bottom of the unit. You have to remove first, and then he should be able to take off from the STRANGE.