Satellite A300-20 b - Touchpad does not work after BIOS update

Similar Questions

• Satellite A500-17 x - micro does not work after BIOS update

  I have a Toshiba Satellite A500-17 x which I have just updated the BIOS to version 2, as recommended by the tempro software. Now with the new update my microphone does not work. Where can I download a copy of the old BIOS?

  ({I used winphlash64 in advanced mode to restore the original backup, it does to the computer, but it just gives the new bios to}) Thank you rich

  Hello

  BIOS cannot be demoted in windows mode.
  Even if you use an older version of BIOS update, you will get an error message saying that the latest BIOS version is already installed. So, forget the downgrade.

  By the way: I put t think the update of the BIOS assigned the microphone.

  Go to control panel of-> sound-> recording tab.
  Here you will see all the available recording devices (micro)

  Activate the microphone it (in this case the people with reduced mobility) and set its default value.

  Where it works: reinstall the audio driver.

• Satellite L735-103: one key does not work after BIOS update

  Hello

  I got a Sat L735-103, part no: PSK0CE - 00N0OUEP and I download the bios for this pc, toshiba Web site.
  I have updated bios with no problem, but now a realization thatm a key (the key located in the good of "* f ' and 'z') of the keyboard does not work.
  I have a plate with windows and linux, and the result is the same.

  Maybey I need to go back to the old bios, but in the toshiba Web site only have a bios download: (.)

  Hello

  Somehow, I can't believe that this button malfunction has something to do with the new BIOS.
  Have you noticed the anomaly key immediately after the update of the BIOS?
  You have default BIOS? If not, access the BIOS by pressing F2 when starting the laptop.
  Here, you can set default BIOS and then save the changes.

  If this is not enough, I would recommend contacting the Toshiba ASP because the technician must check whether the button is defective. In this case, replace the keyboard. The technician would be able to downgrade the BIOS as well and could check if it of really a BIOS issue.

  To find an authorized Toshiba (ASP) Service Provider anywhere in the world, please visit:
  http://EU.computers.Toshiba-Europe.com--> "Support and downloads"--> "to find an authorized service provider" (down in the menu maintenance & repair).

• Satellite A135-S2286 - USB ports does not work after BIOS update

  I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.

  When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.

  It will be useful, if someone has a solution for this error.

  Hey Buddy,

  Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?

  If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.

  I hope that it helps :)

• Re: NB520 - buttons on the touchpad does not work after BIOS update

  Got my NB520 yesterday and installed all windows updates, and then the BIOS updates proposed by the action center of Toshiba and after that the two touchpad buttons have stopped working.

  They did before. Any ideas whats happened, this is the update of the BIOS?

  I put t know if its the related issue of the BIOS, but if there is no way to get buttons working again I recommend you reinstall the OS using the recovery mode. Test the functionality of buttons with the factory settings.

  By the way: touchpad works properly?
  You can use an external mouse correctly?
  Have you checked all the settings of the touchpad?

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Satellite C50D-A-12 x - touchpad does not work after Windows Update

  the touchpad does not work after the windows updare

  I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
  https://Forum.Toshiba.EU/showthread.php?82878

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

  I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

  Thank you
  Simon

  Thanks for your comments!

• Satellite L750 - Bluetooth does not work after BIOS update

  I am preparing some L750 notebooks for use and accept updates from the Toshiba, which included an upgrade of BIOS v1.70 for v2.00. He appears after this update occurs that Bluetooth no longer works, i.e. try to install Bluetooth Toshiba stack will fail as it is said that the Bluetooth radio is disabled and must be turned on for continue.

  As the L750 (model PSK1WA-0C300R) is not a hardware switch to enable or disable the Bluetooth/Wi-Fi, the only option available (Fn + F8) is unsuccessful. I ran a recovery of factory default installation and Bluetooth still does not - resumption of classes does not restore the BIOS to the previous version. I have 5 of the model and confirmed the update of the BIOS is the cause. Two laptops now have v2.00 and Bluetooth has been tested in the work before the update of the BIOS.

  If Bluetooth is not critical for the environment which I deploy these notebooks, it's an annoyance I want to solve. My questions are: has anyone encounter the same problem and managed to resolve it? Is there a BIOS v1.70 available for download to restore the functionality? Y at - it an update of the BIOS > V2.00 for solve the problem I have? Thank you.

  Hi JasonL750,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default settings of the installation. Also, make sure that Bluetooth is enabled in the BIOS if there is such an option.

  In addition, it would be interesting to know what happens if you use the FN + F8 key combination. Don't you see that he has an option to turn on Bluetooth and if so what happens if you do this?

• Satellite S50-B-15F - Touchpad does not work after update of Windows 10

  Hello

  Yesterday, that I've updated my S50 B 15F Satellite with Windows 10. Now the Touchpad no longer works. Tried enabling in the settings. This works except for the left and right buttons. I reinstall the software momentum but no change. Any ideas how to solve this problem?

  Thank you!

  Joram

  Here another thread where the issue could be resolved:
  https://Forum.Toshiba.EU/showthread...-to-Windows-10

• Satellite C55-A-16Z - graphics card does not work after BIOS update

  Hello

  I have a portable Satellite C55-A-16Z with windows 8 and a Nvidia geforce 740M graphics card.

  Last week he asked me to update the version of the bios at 1.30.
  The bios update was successful.

  However when I restarted my laptop I started having a BSOD dgxkrnl.sys.
  Correction of the error and restarted for an another BSOD Windows, and after the second solution, I stopped making BSOD.
  But now, I noticed its games running, if not use the dedicated card, but use the 4000 Intel.

  In the settings Nvidia dedicated card is configured to be always on.
  It seems that my card is missing, but it appears in Device Manager.
  I tried to delete, update the drivers and the default factory reset, but nothing helped.

  Also, when I go into Options power the Intel card is listed and when I disable the card intel in the Device Manager it starts to use the graphic viewer for windows.

  How can I get my Nvidia card to work again?
  Any help is appreciated.

  Thanks in advance.

  Hello

  After the BIOS update the BIOS should be set to default settings.
  You can do it in the BIOS.

  In addition, you mentioned that Windows 8 is still installed on your laptop.
  8.1 to win has already been published by Microsoft and I highly recommend that update you the system of 8 to 8.1 Win Win.

  Before you start the upgrade to 8.1 win, you should check and read the instructions step by step for Toshiba: http://www.toshiba.eu/innovation/generic/windows8_1-message/

  I guess that after the Win 8.1, nVidia graphics card upgrade works well also.

  Your comments would be greatly appreciated.

• Satellite Pro L100 does not work after BIOS update

  Okay, the computer is a Toshiba Satellite Pro L100 PSLA4. Problem occurred during an update of the BIOS on the official website of Toshiba. I downloaded the zip file, it extracts and activated the .exe file at the Interior.

  The window opened by the .exe is a program flashing BIOS, the .exe wrote at the same time a new BIOS file to a temporary folder.
  When he tried to use the program I got was an error saying it couldn't find the new BIOS to the entrance.

  I tried again only to get the same error. Then I left the laptop for several minutes and when I got home, I found a laptop no longer Virgin.
  On which I hear by an obvious lack of BIOS functions i.e. power LED does not change when the connection to disconnect it from the power outlet and the fact that I had to take out the battery to turn off the machine. When the power is turned on now it is check readers and restarts (no display, no beeps)

  What should I do?
  The first thing that comes to mind was to reset the BIOS.
  A problem, I can not find the RTC battery or a rider switch.

  Hi George

  I can't tell why it happened, but I can tell what happened.

  In my opinion, something went wrong during the process of updating the BIOS and the ROM modules was not writer properly.

  Simply says the BIOS update procedure has failed.
  In this case, you will need to contact the ASP in your country for a fix
  The technician must be able to rewrite the ROM module and updated the BIOS again.

  Good luck buddy

  See you soon

• Satellite A50 does not work after BIOS update

  Hi all
  I tried to Flash my BIOS through windows such as recommended on my website of the manufacturer of the laptop (Toshiba). I guess that the process was not as after only 2 hours still "don't interrupt" message displayed. I had to force power off of my PC. Now it is not initialized.
  The Laptio is Toshiba SA50-114, series of satellites. Model n - PSA50E

  I tried the suggestions in the following link
  http://askiris.Toshiba.com/ToshibaSu...200%2035586212
  However, it did not work.

  However, I don't have the disk recovery and file/ROM BIOS tool. Have tried to search on the internet, but without any result.

  Can someone help me please
  1. How can I update the BIOS to get my PC to running back.

  2. to turn towards links where I can find the files in the link above.

  Thanks in advance.
  Best regards
  Parag

  > 1. How can I update the BIOS to get my PC to running back.
  Not possible if your ROM BIOS module was bad flashed.
  If you are a lucky man only the ROM module must be flashed again using a special procedure. But this can be done by a service provider authorized in your country.

  > 2. Point me to the links where I can find the files in the link above.
  There is no link! You need to ask to help ASP.

  Good bye

• Satellite P855 - 10 H does not work after BIOS update

  I bought a new laptop Toshiba Satellite P855 - 10 H recently and there is no problem. Yesterday (August 12, 2012), I saw a warning from center of Toshiba it is has updated dated August 1, 2012, for BIOS and followed all the instructions until you reboot. Laptop not a not restart after you finish all the process successfully.

  Closed and now I can't start. Downloaded the latest bios file in a usb port on the support site, but because it's the exe, I couldn't use it.

  Any suggestions to save my new laptop?

  For me, this looks like screw at the top of the BIOS.
  I put t know whether you will be able to get this working again, but check it please http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

  Maybe it will help you.
  Be so kind and post comments.