Satellite A300-247 - cannot register for the Windows 7 upgrade
I have the problem by registering for free Windows 7 Upgrade.
I have a Toshiba Satellite A300-247 and in their registration require the number of room and the j) not it is only numbered series. I bought the laptop in Israel. Is someone know what to do thank you to useful... Lars_3 thank you very much you the answer.
Logo of the model is still off I wanted to say thank you, there are problems in the site of the browser servers think so much
To be honest it's a little hard to understand your question.
What exactly is your problem? I think you want to register on the site to upgrade to Windows 7.
I n t have experience with this because I didn t buy such a phone compatible update yet, but I think that you need the serial number and the model number of the laptop. The two pieces of information you can find on the underside of the laptop.
Don t forget that this upgrade option is available for laptop purchased from June 26, 2009 to January 31, 2010.
I tried to reinstall my Vista home premium on my Satellite A300-247. I have buit - in the OS. I did it axactly according to manual (reboot - F8 - repair your computer-...) When I clicked on Toshiba HDD recovery system recovery tools wrote me this:
"the recovery of the operating system is impossible
File recovery HARD drive on the second disc of the first hard drive not found.
There is no environment recovery valid HARD drive on this computer. "
I would like to ask what do I do reistall my OS. I have no disk with OS and backup disc creation tool does not work.
Y at - it an option to get my OS on DVD from Microsoft or Toshiba?
If I use this tool to reinstall the OS, I will loss all the information on the D drive (Vista is on the C drive)
Thanks for the reply
Seems that drive HARD recovery does not work.
Perhaps something has changed on the recovery of HARD drive partition or recovery files has been deleted
Usually it s always advisable to create a recovery disk in a first time. This should be done at the beginning and this recovery disk is always useful if something would go wrong with drive recovery HARD or with HARD drive
Now, you can't get the phone because you don t have this drive and the HARD drive does not work
What to do?
Well, I think that you would need new control disc.
You can do so here:
I have a Lenovo T61 Thinkpad with Vista Home Premium Service Pack 2 32-bit operating system. I have currently only about 1 GB of space on my hard drive Go 67.9. I wanted to get rid of Vista and switch on to 7 but currently I don't have enough hard disk space to do (I need at least 16 GB of free space). I decided to buy a second hard drive and do a clean install of 7 so I hope I have less problems in the long term.
My concern is that I ran the Windows 7 Upgrade Advisor report, and he knew questions about utilities of Lenovo, ThinkPad EasyEject Utility and system update. On the Lenovo support Web site, it says that "you can upgrade to Windows 7 without uninstalling these applications, but you may experience problems when their running on Windows 7." When I looked for another application that supports Windows 7, as advised, I found that there are none for 3 known issues of as the cause of the problem is a «limitation of Windows 7» So what the devil? I hate Vista but I do not want to install 7 and then not be able to use my computer properly.
I'm sure many users Lenovo went from Vista to 7... can anyone give advice on what to if wait if I simply ignore these known issues?
Welcome to the forums
You can get the update system for windows7 here
Go through this thread for the simple problem of compatibility with windows7 to eject. Looks like you have not need this tool, once you upgrade to windows 7
I did not understand what you mean by utility Lenovo can you explain a little more about this?
I have question. Can I legaly use cd key of windows vista Home premium preinsaled on my Satellite A300-1ED to install a clean oem Windows Vista Home Premium without toshiba or mcafee software?
Many thanks for the answer!
You can try to do, but it won't work. This key will not activate your own operating system preinstalled.
This product key is for the recovery image, that you got with your laptop.
Many people understand this wrong, especially when they sell old books on eBay and wrote: legal production key is on the bottom. And what to do with this key? You can't do anything with it.
I have a Toshiba a300.
I am facing a lot of problems with it.
First of all, very slow sound at startup... I ' v read read this post
-remove all unnecessary software system
-remove the preinstalled application antivir and installing Avira Antivir software (without a doubt the best for me because he didn't need as many resources)
-deactivation of departure for everything that I have addresses Don ¢ ' t need (MSCONFIG)
-Disabling all components material I don't need in the Manager device (modem, multicard reader, PCMCIA slot, firewire)
Pls u can mention precisely what are all unnecessary software in my laptop... It's first time im having a computer so I donnno much...
I use kaspersky anti virus. Should I switch to avira? I am also faced with another problem. My led on/off function does not work instead, it acts as a mute button. It used to be well earlier... I tried support button (dimmer.exe), Setup of HW, but both failed... then I uninstalled reinstalled n some added value pack from an Australian site, but who has not too... pls help... I'm p * OFF... all the suggestions/help will be really appreciated.
> Pls u can mention precisely what are all s unnecessary software in my laptop...
Only you can decide what software is not important to you
Toshiba has preinstalled many different programs. Most of these applications control certain features of the laptop as keys FN, controls, etc., but of course, this software needs of material resources and slow down the start-up procedure.
In MSCONFIG, you can disable some processes and could test how the laptop would be without these applications.
In addition, I recommend to update or remove the Tempro tool, which has been pre-installed by Toshiba!
The Avira scanner is great. I m using both and it s free.
This eater of low material s and, therefore, the laptop should start more quickly instead of using Avira Kaspersky.
I'm trying to register on behalf of e-learning. After completing your registration account information, Microsoft has sent my email to verify my email address, and when I clicked it, it says "temporary out of service". What should I do? Thank you!!
Click contact us at the bottom.
I just bought a download to update Windows 7 Starter in the home edition, so I might want DVD on my Dell netbook. The Microsoft app site said I would receive an email with the key code to download this. I've been waiting over 2 hours now and still have not received the news. Is this normal? Thanks for your advice. Annette
Have you checked your spam folder?
Try to contact the Microsoft Store:
where to send my proof of purchase
Above Microsoft link has info for the Windows 7 upgrade Options from the various participating computer manufacturers.
Click HP and more website.
FAQ about the upgrade is at the link above.
Windows 7 Upgrade Advisor.
Railways upgrade to Windows 7 at the link above.
For any other question of Windows 7:
Link above is Windows 7 forum for questions on windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
Hi all... For six months I bought a laptop Satellite A300-247 and the battery was holds me over an hour... now... .battery holds little coverage gerenty barely 20 minutes this thank you
Is this just a report, or you have questions?
In any case, contact nearest Toshiba authorized maintainer and ask for help. The warranty will cover the replacement of the battery.
I have a Satellite A300-247 PSAGCE with the Vista operating system and I want to replace Windows 7 64 bit I don't know which driver must be prepared before formatting?
Video card driver not found too?
Thank you all of oren!
I installed Win 7 64 bit ultimate on my old A210 and most of the pilots were found and installed automatically by Windows 7.
I only installed the SD card reader driver and a few tools such as package added value and utility of flash memory card support.
I have windows vista premium x 64
Windows Update stopped working and when I they do it manually it says windows cannot check for the error code 80070424 updates.
I searched everywhere for an answer... Please help
I have a stable system that works with a processor E6300, card mother evga 680i, graphics card 8800gts and 8gbs of RAM running on ulitmate windows 7 (32 bits - I decided to re - install with 64-bit to use the extra 4 GB of RAM, after I deal with the question below).
I recently tried to add an adapter of Intel RS2WC080 SAS/SATA controller in a PCI express slots on the card mother 680i. I know that the card works (such as "it works very well in another motherboard), but for some reason when I put it in the 680i mobo I get the following message appears when I try to start windows. (i.e. the raid controller has no windows on the disks. I always use original hard drive always connected on the same Sata port on the motherboard)
"No physical memory is available to the location required for the windows boot manager." The system cannot continue. "
I tried to turn off virtually everything I could in the bios of the motherboard as an experience (including the things I needed). I also disabled the Intel RS2WC080 card bios.
I'm puzzled. So what I want to know is simply a hardware compatibility problem, or is there some kind of workaround I can run in windows 7. For example, is there maybe some sort of way for her to start using a different memory location than its currently using? (Or is it something error message related to the memory of the bios that can only be overcome with software?)
Thanks for any help.
I tried to disable everything in the bios... including the things I needed. No luck
Thank you very much for the reply Chris but I don't have abandoned bascially. Right now I guess the card and the 680i have some kind of incompatibility and I will just get a different mobo.
I have toshiba laptop missed my virus protection and my laptop a week ago has changed for the windows Classic theme, all other themes are greyed out so you cannot select them, my internet has also stoped working, I also can't do a system restore as it says it does not work any body can help me please?
My laptop will also not me do a backup.Try these:METHOD 1:Back up all the files on a USB Flash drive or an external hard drive and re - install Windows on the hard disk of laptop.-------------------------------------------------------------METHOD 2:
Try partitioning your hard drive and put your files there.1. Start menu search: 'drive '.2. click on create and format hard disk partitions3 right-click the Local Disk (C) and select shrink.4. According to the size of the files, we could save, choose the size you want to reduce (1000 MB = 1 GB)5. right click on the new "unallocated space" and create the Partition. (Name it BACKUP or something)6. place all your important files on the new partition, and then, when you reinstall Windows, select the Local Disk (C)DO NOT select the Partition you you saved on files.Hope that these answers are useful.
I'm under Illustrator CS6 on a Mac version 10.10.3. I created an Illustration and I accidentally did very little to save and close the window. Now whenever I open the file I get the error "unable to open the illustration. There is not enough room for the window; increase the area of document and try again. "This problem is specific to this file only - I can open all other correct files, and anyone who tries to open that particular file on a completely separate machine receives the same error. I read all the posts of people having the same error message, but their problem is different from mine because my problem is specifically limited to this file. I've trashed preferences, hidden and shown the toolbar Application and an open framework of other files and makes them great as possible, has the file open on the file menu, instead of double clicking, and none of these methods work.
Can anyone help?
Thank you so much in advance!
Well, problem solved. For future users with this problem:
Open a new document in Illustrator
Press "F" to enter full screen mode
File > open to open the file problem
I recently bought a Satellite A300-15A; model: PSAJ4E;
The laptop has 6 multimedia keys on top.
As described in the manual, they are supposed to perform the following functions shown (from left to right): (I'm dialing for convinience to talk about later)
1 mute / power button LED
2 CD/DVD button
3. Play/Pause button
4 Stop button
5. back button
6 next button
Can someone explain all the buttons above.
The only function these peform for me are as follows;
1st button only allows the LED turned off/turned on but does not any silent operation with any application (not even Windows Media Player). Even when he performs the operation LED is off; only 6 keys and the bottom screen 'SATELLITE' is disabled; the other LEDS (in DC, Powe. Drums, disks) are always on... What is the problem and how do I start its silent operation so that I can cut the pc with any operation of the application.
2nd button does that open Windows Media Player. What it is supposed to do exactly?
All other keys do nothing but work on Windows Media Player. They do not work on any other application; either VLC or any other. How can I make it work on all multimedia applications...
Please do develop and respond with solutions.
The last of the woks to buttons ONLY with Windows Media Player! You can't use it with 3rd party like WinAmp player.
According to the first 2 buttons:
You can change the functionality assign the right exe file.
If you want to assign the light On / Off instead of Mute, you have to go
Toshiba Assist-> optimize-> Toshiba Button Support.
Select Dimmer.exe and click on register and click on 'Browse' button to Toshiba support and go in C:/Program Files/Toshiba/Toshiba button Support (or TBS)
Now the button will start the dimmer.exe
Even you can do if you want to use Mute or other applications
Maybe you are looking for
Apple Watch display keeps changing to a very zoom-in display where a single character fills the entire screen area. Only way to solve the problem is to turn off and restart the watch. Is there a real underlying problem and should I take it back to th
I have two problems. 1. After installing windows 7 ultimate my A300-1eg started to overheat and shut down.I know that BONES don't influense if laptop overheating or not, this nut the problem I have. 2. I have taken stuff on HARD drive what program sh
I'm doing a video of photos in iMovie 2009. It has been a while, but it used to work. However, all my photos now appear black on the display of the game, but they are on the page of the video clip. Any
I am trying to upgrade my laptop, I have already contributed to a maximum of 8 GB of ram, have no interest in the ssd upgrade, and I wonder I could change the graphics or change the motherboard for a better processor & integrated gfx. Thank you for y
Wind ows 2000 password lost does not open windows