Satellite A300-259 does not start on windows

Hello

I have a laptop Toshiba A300-259 and I have problems trying to get into windows.
When I try to start my laptop, it would remain on the screen of the Microsoft logo with no response. I tried to use the HDD recovery procedure (link below) but if the screen jumps just to load Microsoft. I tried also security mode, but when it finishes loading all the drivers it just freezes.

Is that what I can do before purchasing a toshiba recovery media disk?

HARD drive recovery procedure

http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

Hi mate

Well, if you didn t create a recovery disk previously, you must purchase a new recovery disk.

If the Windows operating system starts not using safe mode or normal mode and if the HDD recovery procedure does not start then I n t see other options for you to try the recovery disk.

Tags: Toshiba

Similar Questions

  • Satellite A300 intermittently does not start

    Hello

    to help you with the A300 which sometimes (recently more often) just won't start/start?
    I run my A300 battery, when I press the power button / stop

    (1) fun begins
    (2) ' satellite' logo on the lower left corner will blink
    (3) drive HARD diode flashes
    (4) display lights even for a while
    (5) lightning touchpad stays off
    (6) it will continue like this for always (no activity except fan)

    After a few hard reboots can occasionally start, he's absolutely perfect job.
    Any ideas?

    Thank you very much!

    On this virtual path, it is not possible to say with certainty what the problem. For two weeks, I have similar problem on my A300. He won start t at all. Power LIGHT blinks two or three times and that's all that happens.

    At first, it happened only sporadically, but now there is no other reaction. In my view, this is power of electronic card.
    On your A300, it may be the same.

  • Satellite C855-1GN does not start the Windows system

    My Satellite C855-1GN will not load Windows.

    After pressing start it say starting windows the four colors appear in the center of the screen and seem to vibrate slowly but will not following charge.

    I ve restarted and run the fix for the system, but it cannot solve the problem, run the system restore but luck is.

    Can anyone help?
    I put t really want to reload the discs so it s not necessary that the girl has loads of work United to this topic.

    She may lose.

    see you soon
    Phil

    Hello

    You are able to access the advanced boot menu by pressing F8 while turning on the unit?

    If you are able to do so, you should try to start the computer using one of the advanced options available in the start menu.

    You can try to start the laptop computer using the last known good configuration or you can try to repair the system by automatically selecting the repair my computer option, you can try to start the machine in safe mode to access important data on the HARD drive.

    Finally (after data backup) I would recommend to recover the laptop using the Toshiba recovery media

  • Satellite L300-135 does not start in windows!

    bought about 2 years ago everything has worked perfectly until today where it is still unable to boot into windows vista... I just turn it on when the windows loading bar loads then it shows a screen for 0.1 sec blue and it resets... even safe mode wouldn't start and restore mode (last known good config) couldn't help him start... I tried to use a live cd of ubuntu linux to back up my data but could not start either gave an error message stating something as abnormal.

    So where is the problem?

    Windows Boot Manager tried to find the problem and tells me this:

    status: 0xc00000e9

    Info: an unexpected i/o error has occurred.

    > so where's the problem?
    Who knows? Do you think that it of so easy to tell what's exactly wrong without running all the tests?
    Maybe it s just a software problem but a hardware problem (RAM, motherboard, etc.) can also be possible.

    If I understand your message, you want to access the data and to safeguard the necessary files
    Well, the recovery disk Toshiba would format the whole HARD disk, so you must back up the data before using the recovery disk.
    You could remove the laptop HARD drive and it could connect to another computer using an external USB HDD enclosure.
    After the backup, you can use the recovery disk to reinstall Windows.

  • Satellite P100-347 does not start in Windows

    My recently purchased P100-347 has recently developed a problem where it is unable to start windows, I get the Toshia welcome screen, then the initial xp load screen, but then everything stops and I'm left with a blank screen.

    This happens not all the time, but it only successfully boots up to abut 1 to 10 tent, ideas or suggestions?

    Well, your laptop has successfully passed the POST (power on self-test) and so I n t think there could be something wrong with the material as the motherboard.

    Possibly the HARD drive contains certain corrupt sectors or there problems with the operating system.
    In any case, I think the first attempt should be reinstalling new Windows OS.
    I assume you have a Toshiba restore CD. You use this CD to install the OS.

    After this procedure the laptop should start without any problems.
    But if the problem persists you should contact the service partner because it s unusual laptop cannot start properly. In all cases, the warranty is valid and everything should be done for free.

  • Satellite A110-162 does not start under windows

    Hello

    Could someone please try and help, Sunday my satellite was fine, came to do turn, Monday and all I get is the black screen, we apologise... etc and start mode, safe mode with networking, security options it security comms mode, last known good config and start windows normally.

    I tried all these, all safe mode options are is giving me a lot of lines from multi (0) disk (0) partition (1) etc., known last good config, and start windows normally just take me to the screen with the blue dotted line flashing boot to windows then pause then intermittent again until I have manually it turns off. I considered using the cd of restoration but if poss won't lose anything on the computer.

    Any suggestions would be greatly appreciated.
    Thanks in advance and Merry Christmas to all!

    Hello Anne

    I don't know if this can work, but you can try it. Start your computer in Mode safe mode and then try to restore the operating system to an earlier time using System Restore tool.

  • Satellite A205-S4607 does not start after windows vista update

    Hello

    I was installing updates in windows vista, but the battery was low and the computer is turned off, then, at the beginning of computer doesn´t, only the hard drive led is light but the screen is black, please can you help me?

    The model is Satellite A205-S4607

    It's not so easy...

    Try to remove the battery and unplug the AC adapter, then wait 30 to 40 minutes, plug in the AC adapter and try again. Maybe the problem is resolved.

    Give me a feedback, what happened.

  • Satellite A300-1EG - does not start

    I have problem with my laptop A300.

    I bought a new drive SSHD and after mounting, the laptop starts more :( I mean, fans work, lights are bright but the screen is black and nothing happens.

    I want to emphasize that I accidentally deleted a few screws marked on the picture (at the time, I thought that this drive is around here somewhere) but I put them right where they were--> http://www.elektroda.pl/rtvforum/files-rtvforum/hgffdfdhfd1119_185514_6cab0d9.jpg

    I tried to run with/without battery/power, I tried holding down the power button / stop, I tried 0 + power, ESC + power etc. Still nothing. Any ideas?

    On this photo is visible to your A300 has two covers of HDD with space for two hard drives but HDD/SSD can be used in one slot (primary). As you can see in the second slot (where you marked the screws) there is no HARD drive connector, and this crack will remain empty because you cannot use the second hard drive.

    I don't know why you deleted these screws. There is no reason for this. Anyway, when you put the original HARD drive in the right place can you raise your laptop?

  • Satellite C55 - Has - 1 L 0 does not start in Windows 8

    Hey guys.
    I hope you can help me a bit.
    I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

    I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

    I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
    I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

    So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
    Is my HARD drive broken? Can I try something else?

    Thank you very much!

    You are right. This issue should be fixed by the authorized service provider.
    Furthermore, why do some risk steps to check this problem, if the warranty is valid.
    Warranty will cover the repair costs.

    Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

    Good luck.

  • Satellite A100-232 does not start windows, but is stuck

    Hello

    I am having a serious problem with my old laptop (Toshiba Satellite A100).
    When I turn on the pc, it does not start the Windows but is stuck.
    If I press F2 to open the Bios, it seems not work while the works of F12 (select boot device), but it is impossible to start anything.

    I tried the following:

    1 removed, cleaned and replaced the RAM
    2. HARD drive removed and reconnected.
    3. check the HARD drive if it is damaged, but it is not.
    4A tried to boot from the Windows XP cd and install it but it crashes
    5A tried to boot from the cd with Linux, but it does not work.
    6. has created a Windows 98 flash drive to start, but it does not work.
    7 tried to clear CMOS by removing the battery, but I couldn't because he is stuck on MB.

    I visited a technisian but he couldn't fix it.
    He told me that the BIOS is corrupted or crashed. Maybe I should replace somehow.

    Is this possible?
    How?

    Thank you

    It is for the Satellite A105 (PSAA2U) Bios Update, you can test the file at your own risk.

    A text readme file is located in the folder, follow the instructions.
    Download the Bios file from the link and copy it to a USB key, go into you Bios and this flash file.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2188938&PF=true

  • Satellite A200 - support Button does not start when windows starts

    Hey,.

    Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
    However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

    However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
    I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

    Edit: I found a solution, even if not the best. If anyone still has the same problem:
    I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

    Hello!

    I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

    Search on the Toshiba site for an update:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite 1700-200 does not start

    HELLO, I RECENTLY GOT AN ERROR ON MY LAPTOP SATELLITE 1700-200. THE ERROR IS THAT THE MACHINE DOES NOT START IN WINDOWS MILLENNIUM EDITION. IT STOPS RIGHT ON THE SCREEN START AND STAY THERE. I HAVE LEFT IT ALL NIGHT AND CAME BACK TO HIM ON THE SAME SCREEN. NOW WHEN I PRESS CTRL ALT DEL TO RESTART, I GET A BLUE SCREEN AND ERROR "WHEN INITIALIZING DEVICE CONFIGMG
    WINDOWS PROTECTION ERROR. YOU MUST RESTART YOUR COMPUTER.
    SYSTEM ORDER. »

    I SEARCHED ON THE WEB AND SOME ANSWERS SAID TO TRY A BIOS UPDATE.

    I WENT TO THE SUPPORT SECTION AND DOWNLOADED THE UPDATE. THEN I FOLLOWED THE INSTRUCTIONS TO GUIDE ME IN THE UPDATE, BUT THEN GOT THE ERROR THAT THE UPDATE DOES NOT MATCH THE PRODUCT ID. DOES ANYONE KNOW OF THIS PROBLEM AND A RESOLUTION. I SAW THE MICROSOFT VERSION AND CANNOT FIND ANY WAY TO FLUSH THE CACHE L2. ANYONE KNOW?

    Hello

    The BIOS updates are available at https://eu.computers.toshiba-europe.com

    Support & download you can choose your machine (important!) and download the BIOS files!

    When it does not also find another way!

    On the blue screen: you tried to start safely modeor last known good configuration?

    Campino

  • Satellite A200-1BJ does not start

    Hello

    My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

    I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

    In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

    No problem with the motherboard or power?

    Thanks for help.

    Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

    Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

    Have you installed any updates or anything that may be responsible for this?

  • Satellite P200-143 does not start

    My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

    I tried to take out the battery for the afternoon, but no effect

    Any suggestions?

    P

    It looks like a dead last.
    The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

    Good luck

  • HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

    HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

    Thnx man always the same thing, but I deleted all partitions and then I was able to start...

Maybe you are looking for