Satellite A300-276 - Webcam driver open fail

Similar Questions

• Satellite A300 - error: "webcam driver open fail.

  Hello

  I have a Toshiba Satellite A300-1SM computers upgrade to Windows 7 (32-bit), and since yesterday, the webcam gives me problems. Does not work.
  Is a Chicony Webcam, built inside the computer. Has suddenly stopped working. The following error message appears: "webcam driver open fail. Please restart camera or system. "
  I have not touched or anything installed. It happened the day after.

  I tried to restore the computer to an earlier date and it worked for a few minutes... but it failed again and pops up the same error.

  I wonder what I have to do to return to 'recover' my webcam.

  Thanks in advance.

  Greetings

  Hey,.

  There is a lot of discussion here in the forum about webcam driver problem, and you should read those discussions:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=233048𸹘
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=232084𸪔
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=233417𸿉

  Problem is that I can t say more about it because the error never happened the same I use my webcam often enough but no problem at all. :)

  Anyway, if you have other questions you can post again ;)

• Re: Satellite A300 (PSAJ4E) - Webcam driver open fail

  I had to replace the hard drive on my PSAJ4E of the A300 and when I reloaded Vista 32 and install all drivers hardware Toshiba everything went well except for a Chicony webcam.

  The side menu is there but it won't work, giving a "driver webcam open fail." "Please restart camera or computer" error.

  I updated the Bios to 4.20
  I first used the original Toshiba, the 20080428125023 webcam driver download (V1.07.175).
  I tried with 'closed the cover 3/4 '.
  I have searched and read dozens of similar problems. I've tried a few, even edit the ini setting. Nothing helps.
  I even tried drivers XP (V1.7.144.0611), 32-bit and 64-bit versions and even a driver from the gateway. Nothing seems to work for this cam.

  What now?

  I also now get "the requested section is not found in the INF file" when I try to uninstall and reinstall the driver through Device Manager.
  I have the choice of
  6.198.1.0
  6.2.208.424
  6.2.238.1217
  all give the same error...

  Hey,.

  There is already a thread on Satellite A300 and webcam driver which could be useful for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59662

  Check this box!
  ?

• Satellite A300 - constant "Webcam Driver Open Fail' error

  I have searched and looked for solutions to this problem and feel like I've tried everything. Whenever I turn on my laptop or try to start my webcam I get the error "Webcam driver open fail." Please restart camera or computer. »

  I used to be able to use the webcam with no problems, but it just stopped one day of work. I recently reformatted my drive to operate the State out-of-the-box, but it always shows an error whenever I try to use my webcam. I am running Windows Vista Home Premium on an A300 model: PSA - GCA. I also tried updating the driver for the webcam (and the last update of the BIOS) section of the support from Toshiba, but without success. I also tried to use the webcam XP driver, but still no luck.

  Any idea on how to solve this problem?

  Post edited by: Replicant

  I also forgot to mention that in my device manager, I don't see my Chicony Webcam at all. There is no section for current imaging devices at all.

  Hello

  If you're looking for here in the forum you will find a sufficient number of threads on this problem but I founded a thread interesting with good detachment of user Akuma and mayb s useful for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

  If it doesn t work I think you need assistance from an authorized service provider. Technicians can check your laptop and fix it if necessary s.

  Good luck!

• Satellite A300-1EI - Webcam driver open fail

  Some time ago I bought A300 and everything was working fine until one day I tried to launch the camera Assistance software and this msg came "Webcam driver open fail. Please restart camera or computer. »

  I didn't know what to do so I decided to uninstall the software and install it again, but to no avail.
  Since then, when I try to run my cam even on msn it works but it all black wrath after awhile.

  Help, please

  Is as black when you start the software help the camera?
  MSN is not the best app for the diagnosis?

  Have you tried to play with the settings and the night mode option?
  Did you remove protect sheet in front of cam?

• Satellite A300-1EH - Webcam driver open fail

  After the disk format (recovery disc HARD T, Vista 32 b) there is no aplication «toshiba face recognition»
  After installation of Camera Assistant Software, it has that error: Webcam driver open fail. Please restart camera or computer.
  Camera is off and I can't turn it on, by restarting the computer gives no effect.

  Could someone help me?

  Hello

  I see you are using Vista
  Well, first you must make sure that Vista is up-to-date!
  You used the recovery and that means that Vista needs to be updated to the latest state!
  All the service packs and other patches must be installed.

  Then remove the software of the webcam of the system, clean the base registry (CCleaner, etc.) and after reboot again trying to reinstall the webcam software

• Satellite A300-1MC - Webcam driver open fail - Vista

  "Driver Webcam open fail." My webcam has a month back. Have been in forums & took advice - nothing works.
  Cleaned disc and reloaded several times pilot. This is not satisfactory.
  Someone has to take RESPONSIBILITY.

  I need to know the CAUSE and a solution.

  Hello John, and welcome to the forum of Toshiba.
  Let us discuss responsibility a little later.

  Tell us first what model of laptop you have exactly, which operating system do you use and what have you tried to solve this problem.

• Satellite Pro A300-1NH - Webcam driver open fail

  Tried to work with my camera, but the error appeared "Webcam driver open fail. "Please restart camera or computer" tried to do both, nothing happened. Drivers modified for camera, the same problem.

  My OS is Windows XP SP3. Can someone help me?

  HI rinat_1,

  Your Satellite A300 has been bundled with Windows XP? If not, try it with settings of factors once again, please!

  Also make sure that your BIOS version is the most recent and you can get it here:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

  Good luck! :)

• Satellite Pro A300 - error - webcam driver open failed

  Hello

  I have the Satellite Pro A300
  The web cam stopped working after upgrading XP in Vista (webcam driver open fail.) Restart camera or computer)

  Any help

  Hello!

  I used the forum search and founded a good display of user Akuma.
  Maybe it's the s solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

  Good luck!

  Good bye

• Satellite L305-S5945 - Webcam driver open fail

  I have a Satellite L305-S5945 and the webcam worked perfectly out of the box, and after that I have re-installed Vista-64 (which he came with) after that I installed a bad program and had a blue screen.

  I have recently upgraded to Windows 7 and now the webcam is not working and I get the error "Webcam driver open fail." Please restart camera or computer. "I tried to find a Windows 7 driver on the support page, but I couldn't find one so I just used both Vista/XP those instead. One is the driver and another the Camera Assistant Software. Here's what I've tried so far:

  * Attempt #1 * freshly installed Windows 7. Without having to install anything else, I download the two aforementioned drivers and then install both and restart the computer. Meet up with working Camera Assistant Software but when you start webcam I get error "Webcam driver open fail. Please restart camera or computer. »

  Try to #2 * after 1 attempt, go to Device Manager and uninstall Chicony USB Camera 2.0 under imaging devices. Restart the computer and let it sit. Finally Windows takes the camera and auto installs and it reappears in the Device Manager. Still get the same errors.

  * The #3 attempt * freshly installed Windows 7. Uninstall the camera in Device Manager, and then install the two drivers. Get the same errors. Restart the computer and still the same error.

  Help! How can I fix my webcam?

  Try to install the driver for cam Win7 to another model of laptop A300 or A500.
  I'm sure that it works well.

• Satellite L300-110 - Webcam driver open fail

  Helloe everyone,

  I have the Satellite L300-110, and I have a problem with the webcam after installing Windows7.

  The error:
  Webcam driver open fail. Please restart camera or computer.

  The camera works fine and appear in Device Manager as Chicony USB 2.0 Camera.

  However, I can use the face recognition.

  Anyone know the cause.

  Hey Buddy,

  Did you check the forum for similar discussions/problems? It doesn t seem so because you will find enough referred to this problem.
  Then use the forum search and read similar topics.

  In any case, you should try to update the driver for the webcam and the BIOS. Both can be downloaded from the Toshiba page.

• Satellite Pro L300 - Webcam driver open fail

  Hello

  I have toshiba satellite pro L300 model PSLB1E and in theDevice Manager is not no matter what imaging device and the driver for the Toshiba Page is showing "driver open fail. "Restart the computer or cam" gears. I uninstalled the driver 10 times and the updated driver, but not the camera works and is not presenet in Device Manager.

  Where is the problem? the pilot? I'm desperate...

  Thanks in advance

  Hello

  Before performing a recovery facility, you should try to update the driver for the webcam and the BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If it doesn t work you must run an installation recovery and in the worst case, the hardware may be faulty and you will need assistance from an authorized service provider.
  If your laptop is still under warranty, the repair should be free.

• Satellite Pro L300 - webcam driver open failed Please restart camera

  I have a Satellite Pro L300.
  Ive had my laptop for 6 months and tried to get my webcam doesn't work since.

  When I try to start it, it says "webcm driver open in case of failure please restart computer camera".
  Ive tried everything, did someone knows something that actually works?

  Please help, Allii x

  Hello

  On the Toshiba site I founded a document on this issue that might be useful:
  http://APS2.toshiba-tro.de/KB0/FAQ9401B50001R01.htm

  So in your case, I will try to update the BIOS and the driver of the webcam. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck and give us feedback. I am interested in.

  Welcome them

• Satellite A300 - Webcam driver open fail after the upgrade to Windows 7

  Hello

  Given that I improve my system to Windows 7 64 bit does not work my webcam. After installing the driver I get the message "webcam driver open failed. "Please restart camera or computer. The camera also do not appear in Device Manager and the microphone are not working also.

  I have a Satellite A300-1LT.

  Help!

  Tal

  Hi pro.surfer,

  You know the forum search? If this isn't the case, you must use because you will find many threads with this error message and lots of useful training, what to do to.

  I put t know which driver you mean, but you need the Camera Assistant Software for webcam. The microphone is a part of webcam, so you need to install the driver for the webcam. ;)

• Satellite A300-1MC: webcam not working no-webcam driver open failed

  After looking through this forum, I tried many "solutions" but to no avail.

  After trying to load the webcam, I get the message: "Webcam driver open fail. Please restart camera or computer.

  I tried to update the software driver for the camera and updated the BIOS.

  This message keeps coming up again. It is better to uninstall the camera attemtping completely and then reinstall?

  Sorry if this doesn't make much sense, im not entirely 'computer savvy '.

  I hope someone can help,

  Thank you
  Ben

  > Is it the camera attemtping completely uninstalling then reinstalling?
  Of course!

  You should first go to Device Manager and need to uninstall the driver.
  You must also remove the software from Control Panel-> software

  After that, you must clean the BONES and the registry using CCleaner. It s tool free google
  Then restart the laptop several times and reinstall the webcam software.

  See you soon