Satellite A300-29N do not want to install linux

Similar Questions

• Re: Satellite A300 - fan does not work after installing Win7

  Hello.

  I did a new install of Win 7 pro 64-bit, and after it does not my fan, not at the start or in Windows. To check if it the fan itself was broken I re-installed Vista instead and the fan worked again!
  Installed new Win 7 but now it's silent :( I checked in the BIOS (latest version 1.80) but I couldn't find any option here. Am I missing a driver or something?

  My Satellite canned extinguishing because of this, so I would really appreciate help :)

  Best regards / Ocke

  Post edited by: Ocke

  Hmmmm... really strange. I use Win7 32 bit on my Satellite A300-1LI and it works perfectly.
  Maybe a stupid question now, but have you tried to use the 32 bit version?

  You have also installed all the Toshiba drivers Toshiba value added package (includes the Toshiba power saver tool)?

• Satellite A300: Light does not work after installing Win 7

  Hello

  I've recently updated my notebook from windows vista to windows 7.
  My touch buttons work perfectly and the light up for a second when I touch them.

  Only, I can not find how do I turn on the lights of the touch buttons all the time.
  Sombody can you please tell me how to do this.

  Thank you

  Hello

  Have you installed the additional package of value VAP for Win 7?

  Value added package controls Toshiba command buttons and this will help you solve your problem

  In addition, you must know that you can turn on and off lighting in the BIOS.

  Check too!

• Satellite A300 - restart of the equipment when installing Win7

  Hello

  I have laptop Satellite A300-24Z, and I try to install windows 7 on it, the installation of the computer restart or get the bottom blue screen (not BSOD) and stuck.
  It s is usually spent on extraction of the files step.
  Help, please

  PS
  It s not a hard drive, I have already replace without a bit of luck

  Hello

  You can install another system of Windows Vista or XP for example or you have the same problems the other systems?

  However, to check if the default BIOS allows you to install Windows 7
  In addition, try to set the SATA mode in compatible mode or AHCI.

• Satellite A300-29N - auto restart within a time

  Hello

  I have laptop Toshiba Satellite A300-29N, recently, I noticed that my laptop auto-redémarre after 5 minutes, I thought that this could be a problem of charger so I replaced it, and nothing has changed, so I thought that maybe the power so I plugged the power regulator and no change, finally I opened to check for problems of heating and changed the CPU cooler and nothing has changed as well.

  This occurs if the operating system is Windows or Linux, so is hardware not software problems, recently, time went from 5 minutes to 30 seconds, directly after the OS loads, I don't really know what's wrong with it, I tried everything I suspected it might be the problem, anyone have any idea why what is happening?.

  Thank you
  Ahmed

  Hi Chambers

  It is not easy to say why this is happening. Can you please do a little test?
  Start your laptop and enter the BIOS settings. Leave it for a while and let us know if the same thing happens again.

• Satellite A300-1HP is not in sleep mode after 30 minutes inactivity

  Satellite A300 1HP is not in sleep mode after 30 minutes inactivity.
  Windows settings are OK (I'm an experienced user).
  He goes to sleep, if I do it manually (by pressing the power button) - but not after inactivity,

  Any idea?

  Norbert.

  Hello, Norbert

  Maybe you should check the settings of Vista power again. I have too many A300 and everything works fine.
  I tested it with all three power plans. Have you done the same?

  Usually, I use the BALANCED power plan and enter mode standby 20 minutes correctly.

• Console buttons multimedia Toshiba Satellite A300-08WB do not work

  Hey all,.

  I reinstalled the driver and I restored my computer but the buttons backlit Toshiba multimedia Console still does not work.

  Any help appreciated.

  Cheers, Levi

  PS. would it not under warranty

  > I reinstalled the driver and I restored my computer
  This means that you have used the Toshiba Recovery disk?
  Have you created a Toshiba recovery disc at the beginning?

  I think that if you didn't use the recovery disc, then the question refers to the missing part of the driver or software

  But Satellite A300-08WB is not known to me what model number of the laptop is it?
  You can find the numbers at the bottom of the unit

• Satellite A300-29N - Touchpad lagging if the network cable is connected

  I have a very strange problem with my Satellite A300-29N. When I connect the LAN cable on my laptop touchpad gal and penetrating becomes very high.

  Here is a picture of the demand shows the problem touchpad
  BTW, the problem is on windows and linux, so I don't know if it's a hardware problem or what?
  http://img23.imageshack.us/img23/3577/touchpadb.jpg

  Hello

  > the problem is on windows and linux, so I don't know if it's a hardware problem or what?
  What do you think? I think the case is clear if the error occurs on (Windows and Linux). That's why it of necessary to exchange the motherboard or the touchpad.

  Your laptop must be checked to an authorized service provider. Technicians can determine what is the reason and order all spare parts, they are necessary. Moreover, the Toshiba site, you can search the nearest ASP.

• I want to install Linux OS in my laptop with Windows 7

  I use Windows 7 and I want to install Linux OS in my laptop with Windows 7, I want to use the dual boot option (if possible provide a screenshot), how and where do I download Linux. .

  You can use the WUBI installer that will install Ubuntu on the C:\ drive without creating a partition or affect your installation of Windows 7. You can rate it and remove it easily in all simply uninstall.

  If you want to have it on a physical partition, then you will need to do some preparation:

  LINUX: Dualboot Linux and Windows

  http://NeoSmart.NET/wiki/display/EBCD/Ubuntu

  I suggest before you perform this backup you your installation of Windows 7 to avoid complications:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Another is to test Ubuntu using software such as VirtualBOX Virtualization:

  http://www.Oracle.com/us/technologies/virtualization/OracleVM/061976.html

  http://Lifehacker.com/5403100/dual+boot-Windows-7-and-Ubuntu-in-perfect-harmony

  http://www.linuxbsdos.com/2011/05/22/how-to-dual-boot-Windows-7-and-Ubuntu-11-04/

• Satellite A300-29N - installation of Windows 2003 server displays an error

  Hello
  Tried to install Windows 2003 Server new Toshiba A300-29N get error.
  -------------
  Search for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
  Technical information:
  Stop: 0x0000007B (0xF789E63C, 0xc0000034, 0x00000000, 0 x 0000000)
  ------------
  The one facing this problem and any updates.
  Concerning
  Samir

  Hello

  I m wondering that you want to install Windows server on a laptop...

  In any case, it is a known problem and also happens on XP and Vista. To fix this you need to use the laptop SATA driver or you change the SATA mode in the BIOS by AHCI compatible, then you don't need a driver.

  Here are some instructions that might be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  I do not know if you will get a driver for Server 2003 but you can try the XP driver and in the worst cases, it must use compatible mode m.

  Let me give you a little advice: If you have other questions, use the forum search. You can find hundreds of discussions about this.

• Satellite A300 - Webcam does not work and is not listed in the devices

  The web does not work the room, resettled several times drivers is not helping with the list of the facilities in the room is not present.
  What should do?
  Satellite A300 psag0e

  Drivers webcam sex cam live-20080616124250

  Hi maestro2118,

  Since when did you notice this behavior and what operating system is installed?

  Before install or reinstall a driver, I recommend you to remove the old driver first. Then, restart your computer and run CCleaner to remove old registry keys. A reboot, and you can install latest driver of the webcam of Toshiba page.

  Check this box!

• Satellite A300 (PSAG8E) - hardware problems after I installed win7 ultimate

  Hello and good day,

  I installed win7 ultimate a few days ago, windows was able to recognize most of my material accepts my build of microphone and camera and another component, I'm not sure what it is (Windows Update automatically downloaded the driver of sound and graphics for me).

  My questions are - where you can find the remaining drivers and where can I get the preinstalled Toshiba tools and software? (The site pilot in the support page Toshiba does not include drivers and software)

  Thank you very much
  King Ben Simon

  Hello

  I have the Satellite A300 (PSAG8E) too and installed Win7 Home premium and everything works perfectly.

  Initially, I must say that I do not know where you are looking for the drivers and tools of Toshiba and that all things because utilities are downloadable on support Toshiba & download page under http://eu.computers.toshiba-europe.com

  It is logical that MIC will not work if you have not installed the appropriate driver. Installing drivers only and not using Microsoft update. What you need are the real and tested and not some free drivers of the internet.

  Go to the Toshiba download page and install all the stuff following this order of installations:
  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

• Satellite A300-149 - issue keys FN on installed Win XP

  Hello.

  I bought laptop Toshiba Satellite A300-149.
  On this system operational Windows Vista has been implemented.
  To use HotKey to include Wi - Fi or Bluetooth. FN + F8 keys. It was displayed in the upper part of the screen in a revealing beautiful graphic menu.

  Now, I had to put Windows XP. I want to use the shortcut key and the menu in the middle of the screen.
  Are these features already in Windows XP, or do not have the driver. This driver is required to put on it?

  Hello

  The beautiful graphic that is displayed with the FN keys belongs to the Toshiba Vista FlashCard utility!
  According to the name it s a tool Vista and can be used _ONLY_ on Vista OS.

  Windows XP supports the functionality of the FN button too.
  Everything is the same, but the icons and the graph that is displayed using one of the FN function is different.

  All that s

• Satellite A300 - microphone does not work

  Hello!!

  I install windows 7-64 bit for my Satellite A300 and the micro does not work, but the webcam works.
  I downloaded and install the drivers of the webcam of the toshiba site, but the microphone still does not work.
  You have any ideas?

  Thank you!

  What applications do you use with webcam? Maybe Skype?

  When you open the sound properties > recording device, which is in the list?
  Is listed and enabled it (green check) Microphone?

• Satellite A300 PSAG4A: Webcam not detected in Device Manager

  I have a Toshiba Satellite A300 PSAG4A 02L00M with Vista Home Premium 64-bit.
  The webcam is not working and it is not detected in Device Manager.
  When I install the Chicony camera drivers, I get the "Webcam driver open fail. Error message.

  The fact that I can't see the Webcam in Device Manager tells me that there may be a hardware failure.
  However, I hope that this is a setting that I can fix myself.

  I had restored the laptop to factory also and I've updated the bios.
  I tried to uninstall all the USB controllers and reboot the PC.

  Is there something I can do?
  It's maybe a software problem?
  There may be a setting?

  Best way to test the operation of the equipment is to check with the factory settings installation operating system with the Toshiba recovery image. As I see that you have done this already.

  So if cam still doesn't work properly, I fear that there is a problem with the hardware.
  It cannot be matter of software because the recovery image contains the driver for the cam.