Satellite A300 - cannot logon Windows after you run anti-virus software

Similar Questions

• Laptop crashes when you run anti-virus Scan

  Recently changed my anti-virus. I uninstalled the old and outdated antivirus such as suggested by the guests during the installation of the new anti-virus.

  my laptop hangs to this file. c:\windows\system32\drivers\cdfs.sys

  I already reported it to the editor of my new anti-virus. Their response was for me to check my video card (I am not a technophile, I don't know how to do this) make sure that I got the last video driver.

  What is the problem with my laptop? What should I do?

  Thank you

  Hello

  CDFS.sys is the CD driver so tell them allows you to check the video driver are a mistake. This could be a
  false positive, which means that it is incorrectly detected as malware.

  Did you run the the site of the manufacturer of your old antivirus removal tool to make sure, that it leaves no leftovers?

  Uninstall/removal tools
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  And:

  http://uninstallers.blogspot.com/

  -------------------------------------

  Make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------

  Go to that file in the start - menu computer or Windows Explorer - find the file - click right on and
  REMOVE it from the trash - you may need to restore the file later.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement. This should replace the one
  file.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ======================================

  If necessary:

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite A300 - cannot start Windows and cannot fix it

  Hey

  first of all I have to say that my English is not the best ;)
  But I hope that you undersrand my problem and help me please

  Today I bought a laptop A300
  I have the second HDD formatiert
  Now I can start windows and I can't fix my system and install new windows

  Please help me!

  and sorry for my bad English ^^

  To be honest I don t understand your question
  If you have formatted the drive HARD second it shouldn't be a problem at startup of Windows.

  You burned the recovery disk? Then boot from it and install the laptop.

• Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  So what measures through 'install '?

• Satellite A300 - cannot find the drivers for Windows 7 64 bit

  Hello!
  I'm of the Greece so I apologise for any errors of syntax, I can do.
  My girlfriend has the Satellite A300 PSAJ4E but his hard disk was destroyed, so I bought him a new (WD Scorpio Black 500 GB) and I downloaded the original Windows 7 MSDNAA to install on the laptop.
  The problem is that it doesn't have the drivers cd so I have to find them on the internet. The other problem is that on the Toshiba official support site it is not found the laptop or the drivers for it.
  So please help me find them. Or tell me if I can insert some of the other Toshiba laptop drivers to it.
  I am ready to format and everything and I don't have the drivers.
  Thank you!

  PS. I found this site but I don't know if it is normal to download them from this site and also, I don't know if I should because I will insert Windows 7 64 bit.
  http://driverswin.com/satellite-A300-psaj4e-drivers-Windows-7/

  Hello

  To download drivers use the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  There you can find your model of laptop and all drivers, tools and utilities for it.
  Can find you it?

  If you need help or assistance installation and the installation order please let me know.

• Satellite A300 - w c:\windows\system32\rpcnet.dll and rpcnet.exe recognized as Trojans

  Hello

  while I was scene analysis antivirus on the laptop Satellite A300-15 b, my software recognized w c:\windows\system32\rpcnet.dll and rpcnet.exe as Trojans and deleted. These files are essential?
  How can I get back them? If someone of you cannot answer, I'd appreciate any help.

  Hemoth

  What anti-virus software are you using and have you updated to the latest list of detection of virus/trojan?
  To retrieve these files, you can use the windows repair console, which can be entered by pressing the F8 key before the windows operating system starts.
  Will take you to a list where you repair or somehow mode called option.

  If this does not work, you can try using recovery media.

• Cannot run an anti-virus software after an infection!

  OS: Vista Edition Home Premium (Service Pack 2)
  System: Gateway MT6821 32 - bit os

  Saturday:

  • Downloaded a file from a friend who turned out to be infected unknowingly.
  • Contacted McAfee help once a Trojan horse has been "blocked and deleted. At this point when I open internet explorer, you could say that my computer is still infected with something. I would like to enter an address in the browser and would be redirected to another site (i.e. random search, youtube, offer to purchase through my ISP)
  • Ordered to contact Microsoft indicating that it was a problem with internet Explorer.
  • Through a problem with Microsoft where they found a file (cngaudit.dll) that was bigger they said it might be that showed them that my computer has been infected. Tech also found cngaudit .dll (69) where it is said that it was a copy of the original file which showed that my computer has been infected.
  • Set up a time for another Member of the support team to call me on Sunday to help in the kidnapping.

  Tuesday:

  • After no calls Sunday or Monday, I contacted Microsoft with my # of cases and a second rep attempted to help the elimination.
  • Remote access and technology attempted to run the Scanner again enabled (has been blocked)
  • Attempted to run HiJackThis... was able to download, but not executed.
  • Downloaded and run Norman Malware Cleaner.
  • NMC found 2 infected files... C:\Program Files\Magic Encyclopedia\dvmwlkt.exe (Infected with Malware.ELBD) and C:\Program Files\Magic Encyclopedia\magic.exe (Infected with Malware.EENX) both of these files have been deleted
  • NMC also found C:\Users\Page\AppData\Local\Temp\~DFEDF2.tmp, but access has been denied and it could not be deleted.
  • McAffee is always installed at this time and all the minutes I get a pop-up indicating that 2 (located in the temporary file) Trojan horses has been blocked.
  • Called Microsoft a 3rd time and met with an another tech once again connected via remote access and "worked its magic" like others and recommended I have remove McAfee and reinstall because the alerts I receive are "fake".
  • Remove and reinstall to see that McAfee will not be updated or protect. Now the tech suggested that I contact my ISP for assistance because McAfee has been downloaded from their site and seems to be defective.
  • Contacted my ISP and was told to contact McAfee.
  • Contacted McAfee and told to contact Microsoft.

  Wednesday (2 a. .m):

  • Always at work, trying to get something to work. Attempted to run the cleaning (ERROR: the instruction at 0x00cb34ef referenced memory at 0 x 00000000) The memory could not be read. Click on OK to terminate the program.) Attempted to run the disk check (went through the process and when the system has restarted, he received an ERROR saying that my computer would have to close and restart)
  • 04:00 found this forum! YES!
  • Removed all anti-virus software as suggested (old version of TrendMicro who was no longer in use, McAfee using the Development download, Hi taken this, Norman Malware Cleaner and disabled Windows Defender)
  • Attempted to launch the Scanner and even once, was not allowed.
  • Downoladed Malwarebytes'... put up-to-date, but as soon as the scan began to close.
  • Downloaded SpyBot and scan it again just to make it stop after the update.
  • A run ESET Online Scanner and found 2 objects (files win32)... cleaned and removed.

  Where am I today? I can't always run antivirus software and my computer is currently not protected... online security with networking Mode.

  Any suggestions?

  You cannot save your programs - a clean installation wipe everything from the hard drive.  Programs need to be reinstalled (they cannot be copied or saved) - and you probably wouldn't do anyway because there is a good chance that some of the infected files can reside in these same programs.  The ONLY way to avoid this is to get your hands on a real Windows Vista Installation disc, so we can attempt a repair system/upgrade where your programs will be preserved (and we don't know yet if that will completely solve the problem of infection but it probably will restore the functionality at least for a certain period of time).

  Sorry for the bad news, but that's just how it is.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Composite shape disappears after you run Calc

  After running a calc from a context menu in a composite form of planning, only 1 of the components of the form is displayed after you run the Calc. I then have to navigate to the composite shape. Anyone know what might cause this behavior?

  Thank you

  FA

  I found a solution where if I run the calc in a new window he returned to the composite shape. It is interesting that the other composite shapes do not have this problem.

• Mailboxes are not visible in mail after you run the OS El Capitan 10.11.5 upgrade.

  Mailboxes are not visible in mail after you run the OS El Capitan 10.11.5 upgrade.  The boxes are there (somewhere), and I can save the messages in them.  I can just see them or call back messages on my macbook air.  Structure of messaging and mailbox is intact on my iPad and iPhone, and all messages are recoverable.  Any help to restore the messages on my Mac would be greatly appreciated.

  The mailbox list is divided into categories with such topics on my Mac. When you position the cursor on one of these positions (with the exception of the mailboxes), you should see the Word display / hide it on the right. Please, click on show, if that's what you see.

  In the category of the mailboxes, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small tip of arrow. If the arrow points to the right, click it so that it points downwards.

  Also note that you may need to scroll the list of mailboxes upwards or downwards to see it all.

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• Satellite L40 - cannot start Windows

  Hello

  hope you can help, my computer Toshibal L40 laptop on commissioning began by displaying the following error message:

  * "Cannot start Windows. a recent change in the software hardware might be causing... » *

  It offers the possibility of:
  "* Launch Startup Repair option" * "

  I chose this. WIndows seems to load up, but then I get the following error message:

  Installed program cannot start. Click OK to turn off the computer *.

  I lost the recovery disk, but attempted to load the recovery console by using a windows XP disk, but it gave me error message more. Advice would be very welcome.

  For the installation of Vista you don't need SATA driver but for Windows XP Home edition you need. Is no problem at all.

  The question is what you want to do now? If you want to use Vista just use recovery media and you will have factory again.
  No problem at all.

• Disk space free (compress old files) does not change after you run Disk Cleanup.

  Original title: win. XP disk cleanup

  Win. XP: Free Disk Space (compress old files) does not change after you run Disk Cleanup.  Confused.

  Thank you. VC

  Compress your files, your computer will slow down a lot. I recommend that you don't try this.

• Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

• I'm running a full scan of the system with my anti-virus software and it filled almost my laptop crashes, problem with the vga865.fon file

  I'm running a full scan of the system with my anti-virus software and it filled almost my laptop breaks down when it comes to: -.

  c:\windows\winsxs\x86_microsoft-Windows-font-bitmap-oem_31bf3856ad364e35_6.0.6000.16386_none_fb2d5aefb17b8d65\vga865.FON

  This file can be replaced.  When I scan this folder individually its fine, please help

  Thank you

  Hello

  What protection software antivirus you are running on the computer?

  Method 1: Check if you can run the scan in safe mode without in all questions

  Follow the steps mentioned in the link below to access the secure mode
  Startup options (including safe mode)

  Method 2: you can run Safe Mode security monitor, see the steps in the article below
  How to install the free Windows Live OneCare Safety Scanner and then scan your computer in Mode safe

  Method 3: Follow the steps mentioned in the link below to check your hard disk for errors, and then check if the problem is resolved
  Check your hard drive for errors

  If the problem persists,

  Method 4: Long file name could cause this problem, perform a backup of the file (copy it somewhere else), and then rename the file, check to see if that makes a difference

  Note: Copy the file to the original location.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• where can I get a free anti-virus software, so that you don't have to pay

  where can I get free an antivirus program, you don't have to pay for cannot afford to buy one right now

  http://www.techsupportalert.com/best-free-anti-virus-software.htm

  http://www.AV-Comparatives.org/

  http://www.dslreports.com/Forum/r25776413-2011-anti-virus-poll