Satellite A300 - dvd, usb and card reader does not work

Similar Questions

• Desire x 2 Dock USB and card SD does not work

  The USB port on the left in my dock Envy keyboard x 2 has stopped working. Whenever I anchor the portion of the Tablet for the keyboard, I see an error message "USB device" unrecognized in the taskbar. In addition, displays an 'unknown device' Device Manager, listed under the key "other devices."

  Also note the card SD of Dock is doesn't work the same way. Some cards are recognized so that in the past he appeard as USB/removable disk device.

  I tried to reinstall Windows, reinstall all the packages in a driver from the web, etc. Nothing works. A few times, I was able to use the port or card reader after plugging in the tablet. However, they invariably become non-functional the next time I log out/dock the tablet or restart the system.

  I am quite experienced professional Windows support with thousands of hours of creation of hardware/software solutions around Microsoft platform. However, I am at a loss as to why I can't get this device to be recognized. All other Dock - right USB, HDMI output, keyboard and trackpad devices - work. The problem seems related specifically to the left and some hub USB root supports it and the SD card reader.

  FYI, I'm a stranger for months, making it virtually impossible to send the diagnostic/repair unit. I hope that there is a hotfix for that and that someone who reads this will have a suggestion on how to proceed.

  Thanks in advance!

  RCK

  Well, in a bizarre resolution to the issue, the dock has decided to start working again. Don't know what I did, but I suspect it had something to do with the UEFI settings stored in the CMOS. I searched update utility for BIOS Insyde Software documentation after witnessing of the docking station to return to life temporarily after re-flashing the BIOS. I found a setting in the platform.ini - ClearCMOS file - and I flipped it to '1' and re-flashed to see what would happen.

  Nothing changed immediately, however, the next day I was invited by Windows Update to download the latest definitions for Windows Defender. When he was done, he prompted me to restart, I found strange as the Defender updates don't usually require a reboot. Then I noticed the "Windows Update" start screen, while the unit has been reset, indicating something was more than just a simple refresh definitions Defender.

  Yet, I do not think anything of it and continued by usual until I noticed something weird: when I re-docked the Tablet I heard the familiar "donk doink, dink" tones. I did a double-take to make sure that nothing not hanging off one, working USB port (right side - it was empty) and then frantically connected to see what was going on a. To my surprise, the USB error message was gone and I could see once more the content of my 64GB SD card into the slot in the dock.

  I took a screenshot of the Device Manager just to have a reference of work to see how it * should * look, then held my breath and detached from the tablet. I waited the Plug & Play tones, which indicates the docking drivers, had unloaded, checked device (no sign of the USB hub) Manager, hold for a count of ten and prayed while re-docking of the tablet. Yet once, the PnP tones shot and Explorer opens a window on my SD card.

  Still not convinced that the "fix" would stick, I took the next step and restarted the machine. Again, everything was present when the system is back to the top and the procedure of disconnecting/dock worked as expected. My last test was completely power off the unit, wait for half an hour and then restart. Still works. In a last time, I checked the system event log to see what might have been for this mysterious Windows Update. The entrance to update itself mentioned only the definitions of Defender; However, I found several messages from the Installer service talks about the different status updates of Windows on "Absent". Very strange.

  Anyway, it's been 36 hours and I continue to check to make sure that the dock is still working. So far so good. I'll feel better as soon as I spend the weekend, but for now I think that the problem is resolved.

  As for what caused, and also what might have finally fixed, I guess this will remain a mystery. Could Defender blocked a significant update that was lit green subsequently after the update of definition? Or maybe my tweaking of the BIOS update utility. Trigger files INI Windows re-installation of some critical updates?

  Who knows? And frankly, who cares? I'm just glad to have my dock that is doomed to return!

  RCK

• Satellite A300 - Help Support and Windows Vista does not work

  Hello

  I have a Satellite A300 that had Windows Vista Home Basic pre-installed.
  When I click on the Windows Vista Help and support help windows appear, but an error message box pops up that says page Web is no longer valid.
  The Help window opens blank with the mode circle cursor.

  How should I do?
  Thank you.

  When you open help and Support your laptop is connected to the Internet?
  If this is not the case, try to open it with an Internet connection.

• Satellite C850-B635 and Win7 - card reader does not work

  My laptop came with windows 8 and the card reader was not working
  but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

  I downloaded a driver called card reader controller, but it did not work as well
  I don't know if there is a problem or there is a driver should I install and I don't know.
  Please help me solve this problem.

  In my windows Device Manager, these devices is not recognized:
  * PCI simple communication controller
  * SM Bus controller
  * Unknown Device

  I tried searching in my page to download drivers on the Toshiba Web site but could not find these
  Please help me make my card reader works again.
  Concerning

  Post edited by: domaking

  For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
  My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

  I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

  In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

  Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

  Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

• Satellite X 200 and Windows7 (32 bit) - card reader does not work

  Hi all
  I hope someone can help.
  My X 200-219 has been recently upgraded to Windows7 and although it works well (better), the card reader does not work.

  Do I need a driver installed?
  Various looked but can't find anything obvious?

  Bravo and thank you
  DB

  Hello

  Try to install THIS driverplease.

  It is Vista 32 bit driver for digital multimedia card reader. I hope that it will work.

  Send comments.

• Satellite M40X: Internal card reader does not work

  My internal card reader does not work. I think that I have not yet installed the driver, or may have other reasons, I don't know. Please show me how to find and install this driver.

  Thank you!

  Can you please check the Device Manager and tell us if any unknown device is listed there?

• USB ports, CD/DVD player, and Mike just does not work

  So I'm pretty sure that these things are happening at the same time, although there are risks my trying to troubleshoot the USB ports have contributed to the failure of the microphone (internal and will not capture sound) and cd/dvd drive (not open). Perhaps? It is true that I know little about these kinds of things, but I'm much less following the indications which is what I did to try to tackle the problem of USB port, which was the first I noticed. I followed all the advice I could find online for troubleshooting when all usb ports do not respond. I used Device Manager to disable in its regular and safe mode. I also uninstalled them all in both modes (even if they reinstall until I'm able to restart). I unplugged and wait 5, 10, 15 min etc. There was a difficulty mentioned about watching the. Mine and INF files do not contain the mentioned error. I'm tempted to all my files backup and restore the computer to factory settings, especially now that the CD/DVD player and the micro does not work. This would solve the problem? If these things are related? Could even restore settings because I can't have in the cd/dvd drive? It's a dell inspiron 1721, and it crushed while you restart for almost a whole day just all the time I've began to notice all these malfunctions. I really appreciate any guidance!

  Good so I solved all of these problems. I don't know what did the trick, but when I went back in the BIOS to re - activate the ports they have worked!

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• Product name: HP 15 Notebook: my card reader does not work - Mute red light does not

  My card reader does not work

  It happened several times after the upgrade to Windows 10

  It may work once or twice after the upgrade, but when there is an update from HP

  My antiverious is Kaspersky internet security and it is compatebale with windows 10

  Also, the Red mute botton does not work but the function works.

  your opinion and your support is appreciated

  Product number: L9N79EA #A2N

  Product name: HP 15 laptop

  Windows 10 House only 64-bit language

  Hello @KhaledMorcy,

  I understand that you are having a problem with your card reader and wanted to help you!

  Have you tried to use Windows Updateto search for the drivers that are compatible with Windows 10?  You can consult this site too: products HP - where can I find drivers Windows 10 and software for my model?

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

  Also, check out the following document, as it can help to solve the problem for you:

  HP laptops - use and troubleshooting (Windows 8) memory card readers

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• driver Ricoh SD card reader does not work after recovery/vista

  Hello

  I have toshiba laptop with vista professional.

  I did the recovery on computer

  Once the recovery sd card reader does not work.

  Yes, I did:

  Downloaded latest driver ricoh xd card disk image

  installed

  restarted

  .. .but still does not work

  does anyone have a solution for this?

  Thank you, klemen

  You update your copy of Windows as directed by my last answer?

  I tried to download driver Toshiba but it seems that there are no downloads for Windows vista for your specific model.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Check the Device Manager for the entries in the card reader under "ATA/ATAPI IDE controllers" and "SD adapters.

  Double-click on the devices to see their properties. On the general tab, note their descriptions and 'device status'.  In the Details under "Ownership" tab select "hardware ID" note the entries under "value".

  You can try to install the drivers built into Windows Vista

  1. in the Device Manager, click on your PC
  2. click on the menu "Action" "Add legacy hardware. Click next in the Add Hardware Wizard.
  3. check the box before "install the hardware that I manually select from a list (Advanced)". Click Next.
  4. under "Types of common hardware", select "IDE ATA/ATAPI controllers '. Click Next.
  5. under "Manufacturer", select "Ricoh company.
  6. in the title of 'Model' select your description of the appliance as shown in Device Manager.
  7. the full wizard.

  There are several Ricoh xD-Picture Card controller, you can try them all and see one that works.

• U2413 SD card reader does not work with Windows 8.1

  My SD card reader does not work with Windows 8.1. There is no problem with the USB ports. Anyone else with problems?

  I have the same problem here too.

  The driver above does not work.

  

• Built in SD card reader does not work

  I recently installed Windows 7, now the built in SD card reader does not work. Before, I was able to insert the card into the slot and would open a drive. No records for accommodation of readers appear on my computer.

  You have installed the Windows 7 drivers for the card reader?

  I go to the computer manufacturer web site and download the appropriate drivers.

• My built-in memory SD card reader does not work on Windows 8

  I installed Windows 8 on my new Acer AspireOne AO756 and the SD card reader does not work. I looked for some drivers and drivers Acer only give x 64 for Windows 8, but I only have x 32.  Everyone knows about this problem, and if so how to solve? Thank you

  Hello

  I understand that the casting of card reader does not work on your laptop.

  1. you get any error message?
  2 have you tried with different memory cards?

  I suggest you follow the steps mentioned below and check if it helps.

  Method 1:

  You can try to run the hardware and devices Troubleshooter and check if it helps.
  a. press the Windows key + R, type Control Panel.
  b. type troubleshooting in the search bar, click Troubleshooting.
  c. click on hardware and sound, click hardware and devices.
  d. follow the steps in the wizard to run the troubleshooter.

  Method 2:

  You can download the driver for the reader from the link below and install it in compatibility mode.

  http://Acer.supportscentre.com/driver-of-Acer-Aspire-one-ao756-Windows-7-32-bit.html

  You can follow the link given below to install the driver in compatibility mode.

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post, we will be happy to help.

• SD card reader does not work

  1 hp Pavilion Dv7-7002el

  2. Windows 7 64 bit

  SD card reader does not work

  Thank you

  Welcome to Brunn.

  Try to run this driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102462-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5254140 & sw_lang=.

  Let us know how things will go.

  REO

• Qosmio X 70 - the SD card reader does not work

  I upgraded to 8.1 win a moment the card reader does not work. Nothing happened when I put a card inside. I tried serveral. I changed the driver to a new from the homepage of Realthek - nothing. What can I do?

  Can you please tell us what card reader device status in device (storage controller) management?

  Furthermore, what you have upgraded your machine following the instructions on http://www.toshiba.eu/innovation/generic/windows8_1-message/?