Satellite A300 FN + F5 does not work properly

Hello
I have a Satellite A300, PSAGCA-09U01N.

I would like to connect a coard S-video from my laptop on my TV, and when I press FN + F5, I don't get the icons appear along the top of my screen _anymore_.
I always get the plug S-video works, but going from normal setting (just laptop screen) by other modes ('laptop screen + TV' etc) is very slow. Can someone please.

Hello

Hmm... If the icons don't appear if you press a FN key you must reinstall Toshiba value added package if you use Vista or Windows 7. You can download it on the Toshiba driver download page:
http://EU.computers.Toshiba-Europe.com

Value added package controls the FN and enlightenment for example keys in order to check this!

Tags: Toshiba

Similar Questions

  • On Satellite A300-1MX webcam does not work properly

    After my windows Vista system crashed 16 December 2011, I had made recovery.
    After that, I have not found any driver for the webcam on the computer laptop everything. On the Toshiba support page, I finally found the 1.7 version, but this does not at all!

    He always appears: driver Webcam open fails, restart the computer or the camera. Since it's built in camera I tried with the restart of the computer, but which did not help at all. So I tried with the option to repair the driver with Install Shield Wizard. The program has done something, but without success.

    So I uninstalled and reinstalled and it did not help at all!

    Someone has an idea?

    Hello

    Found an article in the knowledge base of Toshiba which describes this error and provides a solution to this problem.
    + Why displays the error message: "Webcam driver open fail. Restart the computer or the camera. » ? +
    + http://aps2.toshiba-tro.de/kb0/OPT84026F0000R01.htm+

    But its related to Portege M600 and Satellite U300 only.
    However, you should also try to perform a BIOS update. After that, set the BIOS to default settings and save the changes. Then try to reinstall the software of webcam once more.

    You should also check the Device Manager. Here in Device Manager that the webcam should be recognized as a USB device, if this isn't the case, then it means that the webcam was not recognized by the OS and that means there could be a hardware problem

    As far as I know, the webcam is connected to the USB controller on the motherboard. If the cable connection is lost, then the webcam is not recognized in Device Manager; or as a USB device or an unknown device.

  • Satellite L775 - mouse pad does not work properly

    I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

    What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

    What's past and how to fix this?

    Thank you very much.

    > What's past and how to fix this?
    After reading your ad, I still don t know what is your problem.
    > My mouse pad is not working properly
    How to understand this? What does not work properly? What happen exactly when you start your laptop?

  • Satellite Pro M10 - infrared does not work properly

    Hello

    I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Click Troubleshoot to start the troubleshooter for this device.

    However, under Driver Details is said:
    C:\windows\system32\DRIVERS\smcirda.sys

    I extracted the zip file in my home directory of c:\downloads\infrared.
    whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

    Thanks in advance for any help.
    Chris

    Hello

    If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

  • Satellite C850 - internal MIC does not work properly

    my knees thoshiba (C850 - B237) internal microphone does not work properly. I checked my record with webcam... but can hear the noise only... in the settings of the sound card, everything is ok... I also did the uninstall device driver and restarted... But the problem is still... Help, please

    You must mark the internal mic as the default device.
    This can be done in its tab → click right on internal mic to record and choose the default device

  • Satellite A300-1NO - webcam does not work, but the LED lights

    Hello!

    I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

    Is there any solution for this?

    > Is there any solution for this?
    I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

    I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

    One more thing: have you noticed this problem in the first moments after installing Win7 or later?
    Have you installed something that may be the reason for this?

  • Satellite C70D-B-300 does not work properly

    Hello
    Since I bought my laptop Satellite C70D-B-300 I have a few problems:
    (1) I can't turn off the laptop, (the screen turn off but laptop still running), similarly I can't close the session
    (2) start menu windows apps and sometimes that I can't open (if I click nothing happen)
    (3) 3/4 times a day, the laptop get in crash, I can't do nothing, I need to shut down with the power button (press for 10 seconds) even with ctrl + alt + delete does not work
    (4) new problems with 10 windows, I can not open a shop, sometimes cortana and star menu does not work so I need to restart... but I guess windows problem not Toshiba

    Thanks in advance

    There are too many problems.
    In my opinion, you must reinstall the original recovery image feature and test the laptop with 'presets' again.

    What is an option for you?

  • Satellite A300-1BZ - microphone does not work - need driver

    My microphone does not work & I can't find what kind it is to locate the pilot, can assits anybosy please?

    Hello

    The internal MIC is part of the webcam.
    Next to the sound driver, you will need to install the Chicony webcam software.

    You could test the microphone using the webcam software there is an option that allows you to record the audio stream

  • Satellite L500D - integrated webcam does not work properly

    Hello world

    I have a L500D (I got it for about 2 months now) and yesterday I realized that my webcam did not work properly even if it worked just fine a couple of days.

    Here's the problem: when I turn it on (via Skype or through application of camera web toshiba), the colors are reversed: it's exactly like I had added an effect on the image as 'Posterize' or 'threshold '. Everything is bright, grainy, saturated...

    I tried in low light and high, and the night mode is not on.
    I couldn't solve the problem with the webcam settings, but regardless, I, can not do anywhere near a normal image.

    I spent a lot of time surfing the web but couldn't find a solution (or someone with a similar problem, in fact). I have windows 7 64 bit.

    Any help would be greatly appreciated. I run my laptop with a lot of care, which makes even more beat when something goes wrong... Thanks in advance!

    Jminiz

    Hi mate

    Didn t find such a problem described discussions, it seems that you are the first person who has reported this

    Have you tried to reinstall the webcam software?
    Try this.
    First remove the software of webcam and then after new reboot, install the new downloaded webcam software.

    PS; have you removed the thin sheet secure the lens of the webcam?
    Check it!

  • Satellite L50D-B - TouchPad does not work properly

    My TouchPad is not working properly, it stops working after a few seconds after the start. Can someone help me?

    To be honest, it is not easy help these problems.
    What exactly happens? Touchpad is completely off? I want to say is there any kind of reaction?

    Have you tried to turn again using the F5 button?

  • Satellite 1100 - CD player does not work properly

    Hello, I had problems with my cd player, it will not read anything under windows, but it will read my CD to restore DOS system and restores my whole system. I called someone at the helpdesk and he said to try and restore the system and see what that is and it did not even a difference, please help!

    Hello

    I think that your staff Helpdesk had run Win XP system restore to restore the operating system! If this does not work, you can try to reinstall the standard CD/DVD driver in the Device Manager!

    If this does not resolve the problem, according to me, that a full recovery of the system must be done! Then it will not work!

    Good bye

  • Satellite A300 - 1 2 does not work with 3 GB or 4 GB of memory

    Does not work with 3 GB or 4 GB of memory, only 2 GB!
    And if I plug a memory in bank1 2 GB module (bank0 is empty) - it's doesn't work too!

    He arrived with 3 laptops. (Sorry, my English is not good :))

    Have you thought about a fact that the phone doesn't support 3 GB or 4 GB of RAM?
    Isn't it?
    Maybe you should check the manual of the first user that is preinstalled on your laptop.

    I think you would find information very important.

    Equipped laptops Intel Mobile GL960 chipset is supported by the maximum memory capacity of 2 GB.
    As I m not wrong not your laptop was equipped with chipset Intel Mobile GL960 the case must therefore be clear now. or not?

    Also is important to know that you will need to use always first bank/slot memory (bank0) If you use a DEAD memory module!

    Good bye

    I think that you can assign 10 points ;)

  • Satellite A300-1MC - recovery does not work

    I have a Satellite A300-1MC. It does not start in windows is right there with the Welcome screen. PC diagnosis indicates that the hard drive is faulty. I replaced the hard drive with a MK3276GSX Toshiba MK3252GSX - both are 320 GB.

    When I insert the recovery disc I get the following message when disk 2 is running "insert the next recovery means that contains the D:\08008XSP6 file. STORMWATER MANAGEMENT.

    Any ideas where I'm going from here? »

    Hello

    Are you sure that you Recovery disk was created correctly?
    This recovery disk function properly in the past?

    You label the discs properly?

    It seems that there is a problem with the recovery disk.

  • Satellite M40: USB Audio does not work properly in ACPI mode

    Hi all
    I just bought a laptop Satellite M40 whose purpose is to be used as a portable audio system.
    For this, the USB audio devices are an excellent solution.

    Unfortunately, although it was working properly when recording (sound is perfect with all devices compatible USB Audio, I have tested), there is a problem in reading that I had a lot of clicks and POPs.

    After a lot of research trying and google, I solved the problem by changing the computer ACPI PC Standard mode.
    This is a workaround.

    But this way, I don't remember what my status of battery, and my laptop does not shut down automatically.
    Actually, my laptop is no longer run as a laptop :(

    I suspect a very serious problem in a Toshiba components management. In particular, I wouldn't be surprised to be told that freeze the cords of some regular system of court management, and therefore the 10ms buffers audio USB fall in against the recess.

    This would be so much bother me if I were not part of the technical support team of the company that launches also a few new audio USB products who will not fail to work correctly with laptops.

    My question is:
    Is there a driver / updating bios that gets rid of this problem?
    If a person of Toshiba technical support to address this issue directly with me, I'd be happy to help, as I am personally and professionally concerned.

    Thanks in advance.

    [Edited by: admin]

    Hello

    I put t know what USB audio device you use, but most of the USB audio devices cannot use the USB power. These devices have need of an external power supply of A.C and especially this external power supplies are delivered with the USB audio device.

    Also, I read on some sites that the pop occurs sometimes due to non synchronicity of the modules different buffers or / and of the use of certain applications in parallel.

    The computer ACPI PC Standard mode change is one of the many solutions and proposals
    You can check some patches from Microsoft. Check if all updates from Microsoft are installed.
    Also change the performance options in the options of the system to adjust for best performance.
    Disable Windows messenger.
    Virtual memory should be set to custom size and initial size and maximum size must has the same value (ie. 512/512)
    In the system.ini should the vcache is also the same: MinFileCache = 16384, MaxFileCache = 16384
    Disable the peripherals such as scanner, printer.

    As you can see, these issues could occur on all computers (desktop and laptop) and it s is not a problem of Toshiba. Also, contact the manufacturer for support external audio device and detailed information.

    Good luck

  • Satellite A300 graphics card does not work

    Does not my graphics ati mobility radeon hd 3470, only the blue colour works on it and the display of the laptop is not working too, I need to plug a monitor so that I can work with it? Can I replace it? If so where can I buy a graphics card for?

    Hi paulik123,.

    If you also have a problem with an external monitor, there seems to be a problem with the internal graphics card
    Did you notice the same problem when you get into the BIOS?

    As Akuma writes you can contact a service provider authorized in your country. Guys are able to replace graphic card/motherboard for you.
    The list of aspic, you can find here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

Maybe you are looking for