Satellite A300: Need ATI HD3470 XP driver

Similar Questions

• Satellite A300 - Webcam broken or a driver error?

  Hi to everyone.

  I have a Toshiba Satellite A300. He is eight years old, but I want to continue working with her.

  When working, he felt on the floor and the HD was damaged. I replaced it.

  Now, I just installed Windows 7 x 64 (previously, it had Win XP x 86). I installed all the drivers from Windows Update and everything works fine, except the webcam.

  Software that use the cam say "no cam 'present'. I even installed the driver from Toshiba support page (an exe that automatically downloaded a couple of drivers), but the guard cam does not.

  After that I started to suspect that the camera broke when he fell. So I would like to know how I can do to test if the camera is attached to the system that BT the OS is unable to communicate with her because of driver problem, or if the device is broken and it does not recognize the laptop itself. Is there a toshiba hardware detection software? Report software? Or can I try something like AIDA64, in which section can be listed? Or I see in windows Device Manager?

  Any help will be appreciated.

  To be honest, I think there may also be hardware related issue. On this virtual path, it is not easy to tell where the problem exactly. We cam cable or the camera itself.
  What should do? In my opinion computer laptop must be disassembled and you should check the connection of the cable cam.
  > Is there a toshiba hardware detection software? Report software?
  Not for users like you and me. This software is probably available to service providers. Theoretically, when you use these software and it is on this system is not detecting the cam you need to disassemble the machine and check.

• Satellite A300 - how to start HARD drive recovery after own OS insatallation

  Hi guys.

  I have a question.
  I have a Toshiba Satellite A300, which came with Windows Vista.
  Normally I have the recovery with the normally pre-installed utility partition.
  After that I formatted the system partition, I installed a clean and fresh Windows 7 copy.

  My question is this.
  Since the recovery partition does not get soiled with, is there not a way to install the disk recovery utility hard back in recovery of Windows of F8 before the boot options?

  Please don't tell me that I need to have the recovery disk.
  I already did, I just want to find a solution because it is not that hard for someone who accidentally formatted the system partition and had not created the disks, but the recovery partition. My guess is to do some modifications in the files of the Windows recovery environment that are launched when you use the option to repair my computer at startup, because normally, HARD drive recovery utility appears as one of its tools-options.

  The problem is that I don't have to where these files are, maybe (C:\boot?)
  Currently, I am trying to see if a facility upgrade of windows 7 on windows vista will keep options for hard drive recovery then maybe I will find what it takes.

  All suggestions are welcome!
  Thank you for your time.

  OK, just a hint more, I found what is happening with the recovery environment, and which must be replaced to include more tools...
  This article was really helpful:
  http://www.techplat.com/2010/02/12/how-to-replace-default-Windows-7-recovery-environment-in-diagnostic-and-recovery-toolset/

  Also, I found a few guides microsoft on changing windows 7 recovery environment.
  http://TechNet.Microsoft.com/en-us/library/dd744576%28WS.10%29.aspx
  http://TechNet.Microsoft.com/en-us/library/dd744525%28WS.10%29.aspx

  So I continue and I think I'm close...

• Planning to date by Satellite A300-201 on Win7x64 (WLAN-driver)

  Hello

  I m intend to update a Satellite A300-201 in win7x64. I think, I found most of the necessary drivers, but the WLAN driver is missing and does not appear in the download list.
  Someone successfully install win 7 64 bit on this machine still has a solution?

  Thank you very much in advance
  Tom

  Have you tried to install free driver of Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/?page=downloads?

• Satellite A300 - need recovery disk

  Hello

  I bought a Toshiba Satellite A300 with Windows Vista pre installed, but I did not receive any CD or DVD with Vista. I have just a sticker with the CD key on the back of the laptop.

  I installed Windows XP for personal reason and now I want to reinstall Windows Vista by using the HDD Recovery folder.
  Can I install or I should have done a DVD with Vista?

  Thank you

  Sorry, but now you are not able to install Vista with HARD drive recovery. HARD drive recovery can only be used on a system Windows Vista installed XP doesn t support this function.

  Your mistake was that you didn't burn the recovery disk with Vista Toshiba recovery disc creator, and now, you are not able to burn it.

  The only way to return Vista is the recovery disk, and now you have to order it on the site of Toshiba or an authorized service provider.
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite A300 - need drivers for Vista 64 bit

  Hi all

  I have the satellite A300 (PSAGOS - 03401C), I did a fresh install of Vista 64-bit, but unable to find the drivers for the device. Research on Toshiba driver support has not been successful.

  Any help appreciated. Thank you

  Hi married,

  Satellite A300 PSAG0S unknown to me, but on the European page, I created a similar model, PSAG0E. But the problem is that there is no drivers for Vista 64-bit, so I tried a Windows 7 64 bit and here I could found the more pilots. Normally, Windows 7 drivers should also work, they are compatible to Windows Vista downgrade.

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
  Laptop > Satellite > Satellite A300 > PSAG0E > Windows 7 64 bit

  Check this box!

• Satellite A300: Need of delivered software for Win XP

  Hello

  I have the Toshiba Satellite A300-ND1 and this laptop came with vista OS but I do not like vista and I changed it to xp OS.

  But when I did all of the bundled software coming from build-in are surly disappeared!
  So I wonder is that I can find them again, here is the list. Thanks for the help...

  And I checked there site there's nothing there

  Toshiba Bluetooth Stack
  Toshiba Bluetooth Monitor
  Toshiba Disc Creator
  The Toshiba user manual
  Supervisor password utility
  Toshiba Assist
  Chicony Camera Assistant Software
  Toshiba DVD player
  Ulead DVD MovieFactory for TOSHIBA
  Toshiba face recognition
  McAfee Internet Security Suite - Toshiba Edition (including updates of free Internet for 30 days)
  Toshiba Recovery Disc Creator
  DolbyControl Center
  HDMI Control Manager
  Microsoft Works, Microsoft Office Home and Student 2007 (60-day trial)
  Toshiba value added package (Toshiba Power Saver, Toshiba zooming Utility, PC Diagnostic Toshiba, Toshiba Flash Cards, Toshiba components tool driver, Toshiba Accessibility, Toshiba Button Support)
  Google software (Google Toolbar for Internet Explorer, Google Desktop, Picasa)
  Connectivity doctor
  ConfigFree
  Drivers and utilities Toshiba

  Hello

  Toshiba laptops are preinstalled with applications, Toshiba and 3rd additional third-party software such as McAfee Internet Security Suite or Microsoft Works.
  This 3rd software is a part of the image of Toshiba and can ONLY be used with this image of Toshiba. It s preinstalled as OEM version!

  If you want to use Win XP, then you can install it and you will also find the drivers Toshiba and the Toshiba tools European driver page, but you will not be able to download any 3rd software part because it is NOT Toshiba software

  Good bye

• Satellite P200 - need a new hard drive controller

  I think I need a new hard drive for my p200 controller there is no disk in the bios, I replaced the hard drive and still nothing can buy you a hard drive controller or you have to replace the motherboard?

  Hello

  You can not replace the HARD disk controller.
  The HARD disk controller is part of the motherboard and if it works badly then you would to replace the whole motherboard.

  But are you sure you bought a good HDD?
  Where the HARD drive is not visible; in the BIOS or operating system?

• Satellite A300 - need driver SATA for Windows XP

  Hello.

  A300-AIW (PSAGCE)
  I installed windows XP por, 32-bit instead of Vista.
  but there is a problem. I need drivers for SATA, because XP is very slow.
  I changed with the sata from the bios compatibility instead of AHCI mode.
  Can someone help me find this driver?

  [Sorry for my English, I'm french]

  Hello!

  Yes, you need SATA drivers for AHCI mode, and if you have more performance.

  You can download the driver from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Download the Storage Manager, you will find the SATA drivers who need you.

  Copy the driver on an external floppy drive or you build your own installation with nLite disc.

  Good bye

• Satellite A300 - need a new graphics card driver to play the game

  Hello.

  I have a little problem,
  I have the game of simulation of tractor and I'll start the following error message:

  Error: Not impossible not init 3D System.
  Shader 2.0 model is necessary
  Please install the latest video drivers.

  I install some drivers on my computer, that I found on the Toshiba site, but still you can't and don't know what to do with it.

  Could someone help me please?

  Hello

  The error is obvious; the game can not start and run due to the graphic driver.
  I guess that you will need the most recent version.

  I think you should check your graphics card chip and search on some 3rd party pages for the other version of the Toshiba driver page driver driver won't help you.

  Good bye

• Satellite A300 - need driver SATA to install Windows XP

  I changed my OS winXP SP3.

  After reading a lot of posts, I finally installed my new operating system but with SATA compatibility mode. I tried to change again in AHCI mode, but every time I tried Windows hangs at loading. I also tried to install Storage Manager after installation of the OS, but it fails. So I decided to change the XP disk, including the SATA driver, but after downloading all the drivers on my computer I can't find the SATA driver.

  Can someone tell me where is the .inf file?

  Thank you to

  Hello

  Firstly it is not possible to change the compatibility mode to AHCI after installing Windows. You can only do before installing XP, otherwise you get a BSOD.

  However, if you have downloaded the Storage Manager you must extract the files from the .exe file. Open a command line and type the following command:
  ' - A - a - PC:------'

  After that, you can copy the inf for external floppy drive files or integrate it into the new XP installation disc.

• Satellite M30 - need to change HARD drive

  Hello

  I bought a Satellite SM30-104 (model No.: PSM30E-0QRYK-EN) in 2004 and it seems that the HARD drive is dead since it reboots windows xp family again and again. While Windows is loading, at some point, the laptop restarts from the beginning. I can not even access the Bios.

  Therefore, I suspect the HARD drive to be dead and would like to change: SMART MK4021GAS HDD2182 B ZE01 T, 40 GB, 4200 RPM,.

  Could you please let me know where I can buy a new, similar or compatible with more storage?

  Your response will be much appreciated!
  Best regards

  Florian PAUMEIR

  > While Windows is loading, at some point, the laptop restarts from the beginning. I can not even access the Bios
  > Accordingly, I suspect the HARD drive to be dead and would like to change: SMART MK4021GAS HDD2182 B ZE01 T, 40 GB, 4200 RPM,.

  Hmm if the HDD died then windows would not load what whatever, and you get an OS message cannot be found.

  However, if you want to change the HARD drive then you can do this
  You will need a 2.5 IDE HDD. I think the 120 GB limitation due to the LBA28bit
  However, it is my personal opinion perhaps more HARD drive would be compatible as well

• Satellite C660 - need a new hard drive, but which?

  I have a Toshiba Satellite C660-1f1 run windows 7 64-bit. 320GB hard drive there and I want to replace preferably with greater capacity, a but I'm not sure what would be appropriate.

  Anyone has any suggestions please?

  Hello

  Satellite C660, but also other models of notebooks to new generation supports the SATA controller, which means that you need a HARD drive 2.5 SATA.
  The size of the HARD disk is not relevant for the compatibility of the devices. This means that you can use HDD of 250 GB, 500GB etc.

  But I wouldn't take a HARD drive for an upgrade. I would choose an SSD. This SSD drive is more expensive but believe me; It of certainly worth taking a SSD instead of HARD drive.
  You will get great performance gain. This SSD drive is also very quiet.

  Maybe it s best option for you

• Satellite A60-106: ATI graphics card driver update

  I have a laptop Satellite A60-106 and I was told to update my driver graphics ATI Mobility Radeon 7000 IGP, otherwise I won't be able to view the photos taken from the video.

  I'm unable to locate these updates on the Toshiba site. Nobody knows where and how I can get this update?

  Hello

  I don't know if I understood your question right, but you are not able to look at images from your video camera to Mr. I'm wrong?
  I put t think that the graphics driver has something to do with this action.

  What applications did you use? How did you exactly connected the external device? Did you get any error messages?

  Just for the info: I used last time on my laptop the driver from the Omega.net Web site. But on the Toshiba site I found a news that Toshiba recommended to use only the Toshiba drivers graphics and different drivers, you can install it at your own risk!

• Satellite A300 - need to controller network for windows xp (Storage Manager)

  I got my computer from Vista to Windows XP Home edition home. I installed all my drivers except one: network controller. I can't find the driver for it on the toshiba site. Does anyone know where to find it and wich driver should I install?
  I have a Toshiba A300-PSAJ4E (1 to 9)...

  I couldn't intall the Storage Manager or the other. Is it necessary to intall? What is the function of this software? And where can I find one that can be intstalled?

  Are you sure that the network controller and storage manager are the same?
  If you see the Toshiba download page you will find everything you need there.

  Can you please tell us what exactly is your problem?
  Which WXP have you installed? SP1, SP2 or SP3 maybe?