Satellite A300 not recognizing AC adapter when turned on

Similar Questions

• Satellite A300 may depend on from when the power adapter plugged

  Hello

  I have a problem with my Toshiba Satellite A300 when the laptop is connected to the power adapter I have no possibility to turn it on, it's only 2-3 seconds once it comes down.
  When Toshiba is enabled with the battery power and I tried to connect the adapter it also goes down.
  I have no problem with the charge itself, but only with working with AC adapter.

  Please help me what can I do with this problem, does anyone has similar problem?

  Hello!

  For me it sounds like a hardware failure of the motherboard if the AC/DC adapter is plugged and the laptop is turned on

  I don't know but how best to m would be if you go to the authorized service provider nearest with the AC/DC adapter. Technicians can check your laptop and swap the motherboard if it of really necessary. The guys are very friendly and helpful!

  Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite A300 - restart of the equipment when installing Win7

  Hello

  I have laptop Satellite A300-24Z, and I try to install windows 7 on it, the installation of the computer restart or get the bottom blue screen (not BSOD) and stuck.
  It s is usually spent on extraction of the files step.
  Help, please

  PS
  It s not a hard drive, I have already replace without a bit of luck

  Hello

  You can install another system of Windows Vista or XP for example or you have the same problems the other systems?

  However, to check if the default BIOS allows you to install Windows 7
  In addition, try to set the SATA mode in compatible mode or AHCI.

• My keyboard is not recognized by windows when connected to the USB ports.

  My keyboard is not recognized by windows because that is malfuncioned or something else, that's what I get a message when I insert the keyboard to the usb port that could do because the ports are fine.

  Original title: keyboard problem

  Hi Caragata,

  Perform the steps from the link below and see if it works.

  Tips for solving problems of USB devices

  Note: This article also applies to Windows 7. If the fix it does not work, you can then run the built-in utility.

  Good day!

• Neil Young "everybody's Rockin '" is on iTunes but my identical CD is not recognized by iTunes when I transfer them to my computer. Why?

  My Neil Young CD "everybody's Rockin '" was not by iTunes, I transferred to my computer. Same as CD/disk is available for sale at the iTunes store.  I have other CD like Miles Davis, Clash, cranberries, David Bowie, and all my CD have been recognized as well as the CD cover. Why Neil Young CD is not recognized?

  Help is appreciated

  Hello

  Sometimes happens for no apparent reason! Where iTunes sometimes has a remastered version, the tracks are downloaded. The original disc there flaws?

  My copy of this CD, bought at the same time released in the 1990s has been matched. Try to remove the tracks, then reripping CD in a different format with bitrate of 256 Kbps. There is no guarantee that you will get a match but at least downloaded titles would have similar quality to the iTunes store versions.

  Jim

• HDD USB not recognized as "physical1" when creating the new virtual machine

  Hi all

  I wanted to create a new virtual machine, and I wanted to use my USB as a physical drive.

  But Workstation shows me "physical0" which is of course my drive internal.

  I tried USB pen drives. They are not recognized either.

  This somehow is no longer supported? I would have that it would be possible to use USB external HDD as the physical drive to a new virtual machine.

  you have installed VirtualBox?

  If so, you can try to use the virtuaklbox command line tool to create a descriptor of rawdisk for this disc.

  say diskpart on this drive? -It is "online"?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  You find me also in the PhD Virtual Backup support team

• MY samsung YP - U5 does not work when I turn it on, and also it is not recognized by computer when I plug. Is there a special reason for vice; If so what can do to turn it on?

  Please due reply

  Hi hrithikroshan

  As the device does not work correctly when you turn it on I suggest you to contact Samsung support and check. Please refer to the below link mentioned for assistance.

  http://www.Samsung.com/my/consumer/MP3-audio-video/MP3-player/MP3-player/YP-U5AB/XME/index.idx?PAGETYPE=prd_detail&tab=support

  I hope this helps.

• Satellite A300 not giving on display

  Hello

  I recently traded my boyfriend a netboom for a saelite a300-j15.

  Im impressed by the machince, except that the screen is dead when I turn on the machine.
  The first time I started the machine it starts up fine, but it is just dead.

  The display lights in fact at every 50' e that I turn it on.
  The machine has 4 GB of ram installed that has been tested repeatedly, so it cannot be damaged memery.

  My boyfriend installed a hard drive 1 TB in the second slot, even when he knew that it was not supported.
  Do you think the power supply is shot or the Board of Directors is a write-off?

  Thanx

  Hello

  have you tried to remove the second slot of 1 TB hard drive? Remove it and check. Connect the external monitor and see how the tower.

• USB-6251 power(+5V) LED is not solid but flashes when turned on

  Hi all

  I have been using USB-6251 for 3 years without problems until last week.

  Since last Thursday, when I turn on the Board of Directors, the power led (which is located on the top, we write also POWER (+ 5V)) starts to blink and my laptop does not recognize the Governing Council.

  Before this problem, when I turn on the bud the power led was solid and my laptop automatically recognizes the jury.

  I'd be happy if someone can help me to know what happened to my Board of Directors.

  Thank you!

  skim,

  I would try a couple of things:

  (1) try a different USB port on the computer, and probably not the question, but a good starting point.

  (2) validate the external power supply you are using is to show the voltage it is assumed.

  (3) try another computer if you have one.

  (4) check the fuse (Details) USB device and see if it is blown. I can't find anything in the M-Series user manual the retail why should 5V power light blink.

  If none of these work, then the best option is to return the material to the OR and get it fixed.

  RMA procedures for hardware details are here.

• Color LaserJet Pro 200: Printer does not finish pre-seminar when turned on

  When I turn on the printer, it does not meet the criterion of self-diagnosis. All the icons of perimeter lights up but the screen itself is empty. I have already disconnected the printer with it. I also connected the printer directly to a wall outlet using a different power cord. That is what it is?

  Well, I'll send you a few indications of how to perform a factory reset. You should see a message in your Inbox shortly.

  If the printer will not turn on always having the light of the foregoing, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after doing the reset. If you are able to print or if you arrive to a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Projector not recognized by Windows when it is connected to the DVI port

  I have a projector with a HDMI input. I ran a cable my video card from the pc Windows Vista from the exit to the my projector DVI HDMI input. Windows does not recognize what it and the projector wont recognize that there is a signal output on DVI-d port. I plugged my regular LCD monitor in the local port, and it works very well. The problem is that for my regular LCD monitor, I want to use the RGB and DVI connection for my projector. Can anyone help?

  Hi Mauriceyo,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, you have problems connecting the projector on Windows 7 computer. We're here to help and guide you in the right direction.

  I suggest to download and install the latest drivers from the chipset manufacturer's Web site and install it on the computer:
  Update driver that does not work properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Try the following steps:

  (a) open the window customization by right click on the blank desktop and choose "Customize".

  (b) in the to do list click the link "to connect to a projector or other external display.

  (c) the Windows Mobility Center displays, presentation settings box click the Activate button to turn on the projector

  (d) now your screen will be displayed on the projection screen on the big screen as well as your own computer screen

  (e) If you want to change the presentation options click the icon projector inside the box of presentation settings

  (f) the presentation settings Windows appears, if you have turned on the projector, that 'that I am currently giving a presentation' is checked

  (g) when you're giving a presentation your computer stay awake and notification system are turned off by default, the screen saver is disabled

  (h) you can also adjust the volume of system to show different wallpapera in that you usually use, then the presentation ends and you turn off the projector returns regular your wallpapers

  (i) If you are not sure what are connected click on the button "Connected displays...". "on the bottom of the existing window

  It will be useful.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• Win 7 not recognizing active IPV6 when creating in homegroup

  Hello

  When I try to create a homegroup, Win 7 recognizes that IPV6 is enabled, even if the ownership of network adapter so that it is checked.  In other words, I keep getting an error message that tells me to enable IPV6, but it is already enabled.

  My Network (Realtek RTL8168c) drivers are up to date and my router (8855 DLink xtreme n duo) firmware is also updated.  I use a 12 GB Windstream DSL modem.

  Any ideas?

  This is a reply to another post that works:

  Here is that same procedure outlined more in detail by one of your customer support representatives:

  1. temporarily disable the firewall and third-party antivirus on the computer for a test.

  2. check that the competent services

  =========================

  a. click "Start", type "services.msc" (without the quotes) in the search bar and press ENTER.

  Note: If you are prompted for an administrator password or a confirmation, type your password, or click on continue.

  b. right click on "Peer Networking Grouping" service and choose Properties.

  c. check if the service is started; If this isn't the case, please click on the Start button and see if it works.

  d. you can also choose automatic next to startup type.

  e. click OK.

  f. Please repeat the above steps with another service: PNRP Machine Name Publication Service.

  3 modify the key to register IPv6 to enable IPV6

  ==========================

  a. Click Start, type regedit in the search bar and then click regedit in the list programs.

  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. look for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters

  c. check whether the "DisabledComponents" registry key exists. If so, move on the next steps.

  d. double-click "DisabledComponents" registry key and change the value to 0.

  (If the key does not exist, please create the above key and assign a value of 0)

  e. exit the registry editor and then restart the computer.

  Thank you
  Gloria

• Windows 7 not recognizing network adapter

  Windows 7 works in Bootcamp and I am able to connect to the internet.  When I run Windows 7 in Fusion, Windows 7 does not recognize the network adapter.  I have tried both wireless and Ethernet, but unable to get online.  I also tried to load the driver through the Mac OS disk but back Windows do not see the correct network card driver here either.

  Thanks in advance.

  Take a look at the configuration of the Virtual Machine's .vmx file and make sure that the NIC is showing that "e1000" as follows example and if not add it.

  ethernet0.virtualDEV = "e1000"
  

  To get the location of the .vmx config file check out VMware Fusion A Beginner's Guide and or collect Information for VMware Fusion.

• Satellite M30x not recognizing not all USB ports

  My Satellite M30x has recently ceased to recognize all USB devices are connected that he, being a huge super biff computer I can only assume all my USB ports are totally exhausted.

  If anyone has any other theories id be more than happy to hear... Thanks :)

  Hello

  Something similar happened on my laptop. The laptop has stopped to recognize the external device (USB HDD). Someone told me that it happened because I used the safely remove. Usually, if you want to for example disconnect the USB HDD or USB key, you must use the remove before disconnecting the device from the laptop.
  I just deleted all ports USB device and Manager after restarting the laptop operating system recognized all the USB ports again. Further, I have connected my external HARD drive, and it worked!

  I put t know which external USB devices you use, but sometimes the machines cannot be allowed because the ports USB don t provide enough power.
  In this case, you can disable the mode without power failure in the USB hub properties in Device Manager.

  Good luck

• Satellite C650 - not recognizing midi controller

  I had a midi controller Numark Mixtrack Pro DJ. It was working fine until I have installed McAfee. After that, my DJ (Pro 2 Traktor and Serato) programs do not recognize the Mixtrack Pro as a midi controller. I uninstalled McAfee, but that did not fix the problem. If anyone has an idea how to resolve this please help.

  In my view, that it is support McAffe. They know why their product screwed it up.
  Have you tried to roll back the OS to an earlier time when everything worked?