Satellite A300 power suddenly goes out during the race for hours
Dear users of the Forum,
I am facing a strange problem in operation.
My laptop Satellite A300 is suddenly down power during the race for hours.
It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).
This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.
I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.
Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.
I tried to run only on the power (remove battery) and got the same result.
can anyone identify the problem? can you please give me the solution?
smarjit1
Hello
I put t think it is s virus.
En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.
Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.
What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed
Tags: Toshiba
Similar Questions
-
Satellite A300 - 1EC Win XP: BSOD during the passage of external display
Toshiba Satellite A300-1ec almost new, with Win XP sp3, all updates, drivers of toshiba Web page
When I use the extended via tv (s-video) output option, everything is ok.
But when I try to change the display, extended (or any display mode double) to a single screen (laptop)... I get a blue screenHe said something nvidia... but it's not very useful
someone knows more?
Hello!
The Microsoft Knowledge Base, I found an article about this BSOD:
http://support.Microsoft.com/default.aspx?scid=kb;en-us;827663In addition, I think it might be the hardware problem, in my opinion the RAM.
Test the RAM with Memtest86: [www.memtest86.com]Maybe reinstall Windows to solve the problem.
Good bye
-
Satellite A300 - 12K unable to connect to the ADSL wireless modem
My Satellite A300 - 12K suddenly cannot connect to a dsl wireless modem... There are no changes made to the parameters of
However it connects to a modem that is not encrypted.Any idea what the parameters might have changed?
Hello
Why you n t reset the modem and check the settings?
Configure encryption of the modem settings and encryption settings of the WLan card.
Check if you are using the right key and change it if necessary.Sorry but there is no magic answer for you question, we must check everything and if necessary you must reconfigure everything!
-
Satellite A300 - nothing happens if I press the FN key
Hi guys
I own a Toshiba Satellite A300-15J with Windows Vista and the FN key no longer works. When I press FN key on nothing happens. Which driver do you think one should install?
Thank you.
Hey Buddy,
I did a forum search and I found some similar topics are contiguous FN keys:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=62172
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=62181
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=62112I hope that helps! :)
-
Satellite A300-20 q are not on the tech support page
Satellite A300-20 q are not on the tech support page. I can see 20 p, 20R, but not 20 q. Even a model automatic detector cannot find it in a database. Correct this error.
Hello
I don't know which pages or the database, you are meaning, but the Satellite A300-20 q is not available in all countries!
This model was released for the Russia market.
Other models of Sat A300-xxx are avaialbel on the other countries of South-East European/medium.
Welcome them
-
Re: Satellite A300-21I trying to start but the screen does not light upward
I have a laptop Toshiba Satellite A300-21I 15.4-inch around the age of 2 months.
He walks yesterday and received a message (very short)-initialization failed, see the event log.Laptop computer tries to start but the display does not illuminate.
No prior problems.The indices of anyone?
StanleyHello
You are able to access the BIOS?
You see a Toshiba start screen that usually appears at the beginning?What happens if you press F8 at the beginning of the boot process?
Please provide more details!
-
Vista goes to 50% CPU usage and connects the computer for hours after the beginning
Original title: Vista processor
Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start. Cannot run anything with any request of CPU without getting bogged down and crashing. It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU. The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off. Should I just pull the machine and go for Linux, or what? Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse. Is that all I can turn off to get the same performance than, say, windows 3.1? It would be preferable to the current situation. MSCKMA.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Apple Watch freezes during the race
I used my Apple Watch during a 21K run. I used the training software to monitor my heart rate during the race.
After the mark at halfway, the screen dimmed, and the screen froze. (stopped adding distance, and heart rate has been replaced by '-'.)
thinking that it was because of the excessive sweat on the sensors, I tried to wipe the back of the better watch that I have (which is not a lot considering everything that I had on me was wet). by pressing the digital Crown to return the screen to the face of the watch, but whenever I go to the app to drive he would show the same frozen screen.
It is only after a kilometer (about 7 minutes) made the response to training app and worked normally until the end of the race.
for the purposes of the workout on my Apple Watch concerns, I had only run 19,71 km instead of the 21 K who I actually ran.
question: How can I prevent this happening again?
Hello
As a first step, if you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:
- Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
- Update the software on your Apple Watch - Apple Support
It can also help to revive your watch:
-
dad bought me a computer PORTABLE from NUTRIGEST I HAVE BEEN out of the CITY FOR SOME TIME AND LATER BETWEEN the AUTHENTICITY CODE PRODUCT, AND IT's not SAYIING VALID, BUT I KNOW THAT can NOT BE TRUE
If it is a new machine call or go to circuit city and get them fixed. If they sold you the laptop, indicating that it included Windows XP then the onus is on them that provide you a valid COA and the product key.
John
-
How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?
Here is the error
Failure of deployment: Info: request shipment: install and launch
Info: Action: install and launch
News: Native debugging: on
Info: File size: 219949
Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
Info: Treatment 219949 bytes
actual_dname:
actual_id:
actual_version:
result::failure 881 the application author does not match the author token of debuggingThe author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.
If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.
-
I did the 30 day free trial and now decided to buy it. I paid everything and had received an e-mail saying: he will be treated during the next 48 hours. I have to wait to download the non-evaluation period of photoshop? It seems to be do not download and asking me to pay again
You should not have to download anything. You should be able to convert the trial version to full use with the authorization code that you will receive with your purchase.
-
Compiling jsx to jsxbin, Palette disappears during the race
Hello world
My ID version is CS5, I added # targetengine "session."
I compile jsx to jsxbin, but the palette disappears during the race.
Anyone can tell me the reason?
Thank you.
Best regards
Goldbridge
You can wrap the content of jsxbin inside app.doScript () routine and add engine target in front of her.
Hope that helps.
--
Marijan (tomaxxi)
-
How can I change the size of the race for the Brush tool?
Hey guys,.
I wanted to know how to set the size of the race for the Brush tool? It seems I can only fix the pencil too race size. All suggestions are useful!
Thank you
When you select the Brush tool there are two points that appear at the end of the tools. One is for the size of the brush, the other is for the shape of the brush.
Something else to vary the size of the brush over is a zoom before or zoom out of the scene. Size of the brush does not fit so if you do very small step the brush becomes very large comapratively.
-
Hi, my old G5 died and now I need to download the version CS3 average Easrtern - my new Macook has no space for a CD. I have all my serial numbers. I was with the cat for hours - they sent me a link - but when I open the program - all the Hebrew was reversed. I need to ME version. Where should I go? MANY thanks, Naomi
The latest product from Adobe's creative cloud that we create no more any version of Creative Suite.
You can check the availability of creative cloud subscriptions in your country from here: https://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-matrix.pdf
Purchase at: pricing and membership creative cloud plans | Adobe Creative Cloud
Also see, modify the language setting for Adobe Creative Cloud applications
Let us know if that helps.
-
Satellite A50 - goes out of himself during the race
my laptop turns off itself during its operation and am working on it. I already checked the connection ca; even the battery is ok.
Can it be a problem of the cooling module? The fan runs all the time and the laptop gets very hot.
There are solutions to this problem?
It is impossible to work with the laptop that turns off when processing...Thanks for the suggestions...
Hello
This sounds like an overheating problem.
To my knowledge the operating system can the laptop will stop if the temperature increased at the critical level.You know that each device preinstalled in the notebook produced heat.
Sometimes more operating devices with maximum performance. The devices run with maximum when performance performance heavyweight like games runs on the laptop.On my laptop Toshiba power saver determines the method of cooling and the processing speed of the CPU. I think that this is also preinstalled on your laptop. Therefore, you should first check these options.
In addition, you should check your module cooling fans. Sometimes the dust and debris keep the laptop cooling properly.
You must also have sufficient free space around the laptop for cool air circulation.
Maybe you are looking for
-
Installation of the modem for Satellite M70 driver
Hi all!! I am a newbee... I have been instructed by the Support from Toshiba service in Athens to download and install the recentDriver files for my Dial-up Modem, which cannot connect to the Internet. I am in possession of Satellite M70 series compu
-
HP COMPAQ 6710 b / not accelerated Pixel of Minecraft format
Hello, I have an old laptop HP Compaq 6710 b and I try to get Minecraft running. It ran on windows 7 a few months ago but now I have upgraded to Windows 8 and I have the latest video on Windows Update driver, because I can't find the video driver for
-
Error in Microsoft Exchange Server 2010
Greetings, We are facing problems that are not too familiar. Our problem happened after installing Symantec Endpoint Protection in the server that is running Microsoft SBS 2011 with MS Exchange 2010. Thus, our clients are not able to send or receive
-
upper and lower filters in the registry how ca I get it back
in the registry, how can upper and lower filters I get them back. CD and dvd not being recognized
-
Why I get a Windows message: push Apple has stopped working
When I bring iTunes I got the message of Windows push Apple has stopped working? I can't sync my iphone more. Please send help!