Satellite A300 PSAGCE: rate of window and perfomance has fallen since Win 7 64 bit site amenities

Similar Questions

• Satellite A300 - 1 GM - after Windows and BIOS updated LEDs don' t work

  Hello!

  After Vista SP2 update and update BIOS (Media Player and LED power) LED buttons do not work.
  Why?

  How can I fix these buttons?

  Hello

  Satellite A300 - 1 GM belongs to the series of PSAG4E so you chose the update of the BIOS for this series of model?
  Also in the BIOS, you can enable and disable the lighting. Check this box!

  Lighting will also be controlled due to the added value package. You need to reinstall it and the Toshiba site, you can find a newer version:
  http://EU.computers.Toshiba-Europe.com

  Good bye

• Satellite A300 PSAGCA - blue screen using Windows 7

  First by Satellite A300 - PSAGCA-0C301N did not come on the European Internet site when I update the drivers... there PSAGCE...

  I am running on the assumption that A = Australia & E = Europe.
  Can someone clarify this for me.

  The computer worked fine with Vista but since put Win 7 Ultimate here he sometimes gets the blue screen.
  It was a clean place do not install an upgrade

  He can go for a week without a problem, and then I'll have 5 blue screens in one day.
  All the drivers came to the site of the European

  I have 4 GB of RAM
  No devices are connected
  WiFi is always enabled
  Usually connected to the power supply

  If anyone can help to direct me to a solution I would be eternally grateful

  See you soon

  Sammy

  > I am running on the assumption that A = Australia & E = Europe.
  > Can anyone clarify this for me.

  You are right that the last digit or the letter designates the region. Then E means Europe and Australian way.

  It s an Australian series for Toshiba laptop and, therefore, you need to download the drivers from Toshiba Australian page

  The BSOD may be a result of not fully compatible drivers

• Re: Satellite A300-15 b Model_No: PSAJ4E and windows XP

  Hi guys,.

  I bought Toshiba Satellite A300-15 b model_No: PSAJ4E and I am trying to install windows XP. but when the installation message comes out says no hard drive found. I know that this question that I have to use the disk driver hard for allows me to do this.

  My Question is, I need hard disk drivers to support SATA in windows xp?

  Note: I have read in this forum that I can do it in the BIOS Setup, but I don't need this response.

  Thank you very much in advance...

  Hello

  Do the same thing as Niko for his Satellite Pro.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=35787
  I think that the chipset for laptops is the same - Intel® PM965 + Intel® ICH8M. You need load the files in the folder Ich8M_32 bits.

  Good luck!

• Impossible to install Vista on Satellite A300 PSAGCE - not ACPI compliant

  Hello

  I'm recovering the laptop from a friend.
  He has installed Windows XP on its Satellite A300 PSAGCE and concluded that of course XP 32-bit Windows does not support the full functionality of the laptop.

  Now I wanted to reinstall Vista that came with it. I have two recovery DVD but when I wanted to start them (them two DVDs) I always get the error message that the system is not fully ACPI-compatible.

  Now of course this laptop should work with Vista and the provided restore DVD should work as well, no?
  I tried to download a Bios nw, but it seems 1.10 is the most recent.

  I also can't find all the ACPI settings in the BIOS that I could activate.

  Could someone help me?
  It is really urgent and driving me crazy!

  Thank you!

  Hello

  Strange! Usually, if you have created the DVD recovery Toshiba using the TOSHIBA Recovery Disc Creator then everything should work correctly and you should be able to install Vista on this A300!

  I put t know if you have changed something in the BIOS or elsewhere, but you should access the BIOS and should define the default settings.
  Then try to boot from the recovery DVD Toshiba again.

  Good luck

• Can I use European 2.1 BIOS update for Satellite A300 PSAGCA?

  Hello

  My toshiba's Satellite A300 PSAGCA-02Y010, bought in September 2008.
  I want BIOS update latest version 2.10 for windows 7, but in the Web of Toshiba-NZ site, I can only find the version 1.9, I find 2.10 for A300 Toshiba Europe, but Europe models are all different from NZ.

  My question is: could I use this BIOS 2.10 europe in my toshiba A300 nz? Thank you.

  Hello

  I would not recommend using a BIOS that is not released for your laptop model.
  There are a lot of different series for laptop on the market.

  You must use the BIOS that is designed exactly for the portable model!
  As you know, the BIOS update is a reasonable process and can damage the ROM chip using BIOS wrong!

• Installation of utilities Toshiba on Satellite A300 PSAGCA

  Hello

  I'm in the process of Windows XP on a Toshiba Satellite A300 PSAGCA-09U01N.

  I downloaded all the drivers and install them, and now I'm trying to install all the application/utilities toshiba so that they all work.
  I tried installing them in diffirent orders but continue to flock to the top with the same problem.

  The [FN] + [F1-12] (Hotkeys) are not this what do here as it should be, and some of them do any work as [FN] + [F2] and [FN] + [F6-7].

  Anyone know the right order in which they are installed or offer any help?

  I downloaded my form of drivers here: http://www.mytoshiba.com.au/support/notebooks/satellite/a300/psagca-09u01n/download?os=22

  Any help would be appreciated.

  Hello

  You need to install TOSHIBA common Module
  The common Module software is required and must be installed first.
  In my case it worked properly on another laptop from Toshiba!

  PS: There is a BIOS specially for Win XP
  Should use it if you are running Win XP

  Welcome them

• Re: Satellite A300 PSAGCA-03C010 - downgrade from Vista to XP

  Hello

  I'm really new to all this, so I hope that will not ask a question that has already been answered :)

  I bought a laptop Toshiba Satellite A300 (model PSAGCA-03C010) in October 08. It came with a preinstalled version of Windows Vista Home Premium.

  Initially, using Vista was not too bad, but it happened at a point now where his things slows down and is really frustrating. Want to downgrade (/ upgrade) go back to Windows XP and I want to know the "implications" of this and if the Toshiba Utilities are consistent and will work with XP.

  First of all, can I use my ID current product that came with Vista and it enter the product ID when I install XP?

  Also, I am concerned about the Wi - fi, bluetooth, finger scan and HDMI applications - will this work with XP?

  Finally, when I created the "recovery disk", should everything go 'bad' when installing XP or if something does not work, can I use this recovery disc to return to the original "out of the box" installation?

  Thanks in advance and again once, apologies if these qns have already answered in other posts (im not too technical).

  Tamara

  > I'm really new to all this, so I hope that will not ask a question that has already been answered
  In many cases, these questions have been answered already and you might find useful views by using the Advanced ;) search option

  > Want to downgrade (/ upgrade) go back to Windows XP and I want to know the "implications" of this and if the Toshiba Utilities are consistent and will work with XP.
  Tools and Vista drivers are not compatible with Win XP. If you want to install Win XP and want to use all the features of the laptop you must make sure that the Win XP drivers are available for this model of laptop.

  Satellite A300 PSAGCA seems to be an Australian model. The drivers are placed here:
  http://www.ISD.Toshiba.com.au

  I checked this and found a few tools and drivers for this device.

  > First of all, can I use my ID current product that came with Vista and it enter the product ID when I install XP?
  No, you can not use it because it belongs to the Vista operating system preinstalled on your laptop.

  > Finally, when I created the "recovery disk", should everything go 'bad' when installing XP or if something does not work, can I use this recovery disc to return to the original "out of the box" installation?
  Yes, the recovery disk allows to reverse the laptop back to factory settings.
  You will get the same as on the first day of purchase

• Re: Satellite A300-15B does support Windows XP?

  By Satellite A300-15 b support ' windows xp?

  Thank you

  Why shouldn't t Satellite A300-15 b supports Windows XP?
  Of course the A300 supports Win XP. You can install it on the A300.

  All Toshiba XP drivers are available on the European driver Toshiba page.
  Just choose your model laptop and the XP drivers should appear.

  See you soon

• Satellite A300 1lW - installation of Windows 7 - any questions?

  Good morning/afternoon!

  I would like to install a new internal hard drive on my laptop and I want to put windows 7 on it.

  The problem is that it is the first time that I'm going to do this and I Don t really know what kind of functionality will be incompatible with this installation.

  -You can recommend me a version of windows 7 that may be suitable for this laptop?
  -What features will be disabled when I install windows 7 on my new hard drive?

  Thank you very much!

  Concerning

  Remy

  Hi mate

  To be honest I wonder about these questions.
  Windows 7 is fully supported and normally you should get no problems with Windows 7 running on Satellite A300.

  The Windows 7 drivers are available on the page of the Toshiba UE driver. T
  for this I put t expect serious problems.

  If you have any questions, feel free to ask the people here in the community. :)

• Re: Satellite A300 PSAGCA: how to install Win XP as 2nd OS

  Hey any reader for the first time and shows for the first time.
  My comp is the Satellite A300 PSAGCA-02U010

  You 2 questions, hopefully someone can help me with.

  The issue of the first: like many people, I hate Vista.
  How can I run XP as a second OS that don't live my warranty?

  2. the volume level is not very strong (sound) when you watch a DVD etc. I tried different settings, and every time I do I have to restart to take effect, which is a pain that vista is slow to restart. I have downloaded the driver, but noticed that it is exactly the same as what is installed already :(

  See you soon

  > How can I use as a second OS XP who don't live my warranty?
  Installing programs or operating system would not avoid the warranty!
  You can install the Win XP as second OS without fear.

  But before install you anything, I would recommend the Toshiba recovery disc creation!

  With regard to the sound:
  As far as I know the parameters which are changes in the player are not not in trouble. You must increase the volume of every time when you start the software again.
  But have you tested different actors? For example, VLC player is a simple and free tools.
  I recommend to test

• Satellite A300 BSOD when installing Windows XP

  Bought a new Satellite A300 that ships with Vista and a load of other rubbish.
  Set the BIOS to boot from the installation CD of Windows XP, but just after loading the drivers and files and just before
  from Windows XP installs, crash with blue screen advising me:

  A problem has been detected and windows has shut down to prevent damage to your computer,
  blah, blah. In other words blue screen of death that ends with this message - STOP: 0xF78D2524, 0 x 00000000, 0 x 00000000

  Now, I've had quite a few machines over the years, but never something like that before you encounter when you try to
  install an operating system.

  Any advice appreciated, otherwise unit will have to go back to the seller.

  Thank you

  Joe

  Access the BIOS-> SATA mode choose and is compatible-> save the changes and exit the BIOS.
  Then try to reinstall Win XP with SP2.

• Satellite A300 PSAGCE: is it possible for a start of the external CD/DVD drive?

  Hello

  Could someone tell me if it is possible to start the toshiba satellite a300 psagce of cd player external usb?

  Best regards
  Miguel Alves

  Hello

  The BIOS supports bootable devices on:
  -USB FDD,
  -Primary HDD,
  -Optical devices,
  -Network (LAN)

  So * USB ODD * is not supported by the BIOS

• Satellite A300 PSAGCE CPU upgrade

  I want to spend the CPU on my Satellite A300-PSAGCE, BIOS 2.20.

  Now I have Core 2 Duo CPU T5800 @ 2.00GHz - PPGA478 (Socket M)
  PM45 (review / Stepping 07 / B3) + Intel 82801IM ICH9M (review / Stepping 93 / A3)

  Website of Intel - Compatible processors

  Intel® Core 2 Extreme QX9300 processor (Cache 12 MB, 2.53 GHz, 1066 MHz FSB)
  Intel® Core 2 Duo T9800 CPU (2.93 GHz, front side bus at 1066 MHz, 6 MB Cache)
  Intel® Core 2 Duo Processor T9900 (3.06 GHz, front side bus at 1066 MHz, 6 MB Cache)
  Intel® Core 2 Duo P9500 processor (6 M Cache, 2.53 GHz, 1066 MHz FSB)
  Intel® Core 2 Duo processor P9600 (6 M Cache, 2.66 GHz, bus front-end to 1066 MHz)
  Intel® Core 2 Duo P9700 processor (6 M Cache, 2.80 GHz, 1066 MHz FSB)
  Intel® Core 2 Duo processor T9550 (2.66 GHz, front side bus at 1066 MHz, 6 MB Cache)
  Intel® Core 2 Duo T9600 processor (6 M Cache, 2.80 GHz, 1066 MHz FSB)
  Intel® Core 2 Duo processor P8800 (3 m Cache, 2.66 GHz, bus front-end to 1066 MHz)
  Intel® Core 2 Duo P8600 processor (3 m Cache, 2.40 GHz, 1066 MHz FSB)
  Intel processor Core 2 Duo P8700 (3 m Cache, 2.53 GHz, 1066 MHz FSB)
  Intel® Core 2 Duo processor P7570 (3 m Cache, 2.26 GHz, 1066 MHz FSB)
  Intel® Core 2 Duo P8400 processor (3 m Cache, 2.26 GHz, 1066 MHz FSB)
  Intel® Core 2 Duo processor T6670 (Cache 2 MB, 2.20 GHz, 800 MHz FSB)
  Intel® Core 2 Duo processor T9400 (2.53 GHz, front side bus at 1066 MHz, 6 MB Cache)
  Intel® Core 2 Extreme Processor X 9100 (3.06 GHz, front side bus at 1066 MHz, 6 MB Cache)
  Intel® Core 2 Quad processor Q9100 (2.26 GHz, 1066 MHz FSB, 12 MB Cache)

  What models of CPU 2.20 BIOS supports?

  Generally support Toshiba doesn t CPU upgrade, so before we start discussion about control CPU upgrade follow document Toshiba at first - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• Win7 drivers for Satellite A300 PSAGCE

  Toshiba will support win7 for Satellite A300 PSAGCE?
  If so it will be soon? There is no driver for this model how is it?

  Satellite A300 will be definitely supported, but no one knows for sure when the Win7 drivers for some this model will be available.
  Every day there are more pilots. From time to time check the support page. I think that these days, pilots should be there.