Satellite A300 Question on replacing the LCD screen

I had a minor accident with my A300, which ultimately ended in me the screen cracking.
(Yes, I know, what a fool. Believe me, it was a complete accident.)

In any case, the after-sales service is closed until January 5, but I was wondering if anyone might know how a replacement screen would be me back?

Will it cost me more than $80 just to have the 'thing' rated and side on, and I need to know about how I look, as I recently had my end of maternity payments, so we are a middle-income.

Time to talk Abou...

Change the LCD is a little tricky. You have to remove a lot of and remove the screws much.

This is a forum user to Yes, so I think nobody with experience here's how. I think the best is you go in an ASP.

Tags: Toshiba

Similar Questions

  • Satellite A100 - display balack after replacing the LCD screen

    Hello

    So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

    When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

    I think it is the inverter, any suggestions?

    Could be the sensor cover?

    Thank you! Kyle

    Hi Kyle,.

    Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

    Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
    Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.

  • Satellite M60: grey spots on the LCD screen

    It seems that I have a problem with my Satellite M60. I noticed a few more dark spots on the LCD screen. Looks like the screen is dirty (grey size spots about 5-6 pixels), but it seems to be not in the surface of the screen, but on the inside (the surface is perfectly clean) and, certainly, is not the problem of dead pixels or subpixels.

    Is it possible that there is little dust inside of screen? Is it possible to clean it somehow? Such a strange thing is covered by the standard warranty?

    Hi Fox

    Possible it s not a BIOS issue. Of course, I read the other case, but perhaps it s not the same question.

    But do not forget that you are using the good BIOS!
    A lot of users here uses a bad BIOS or bad BIOS procedure.
    In addition, the BIOS version performed from 14/09/06. That is why it s not very old updated.

  • Satellite 2410-303-help with replacing the LCD screen

    Hello
    My screen is dead and must be replaced. Can someone tell me where I can get a replacement and at what price? I live in Mauritius and cannot get spare here.
    Thank you mnay
    Jawa

    Hi Jawa

    In my opinion there is not a lot of options. You can order parts by authorized service partners or order it from some independent PC shop. Check if you can find a partner in your countries, or maybe someone else (they can send you everything you need to). Another way Google a little bit and I'm sure you'll find someone who can send you a new LCD screen for your laptop.

    On the price I can't tell you much because we walked free and the price is different from one country to the other.

  • Re: Satellite A300 - can I replace the graphics card?

    Can I replace the graphics card with a best in Satellite A300-14 (PSAJOE)?

    Hello

    As you can read in 100 other discussions here in the forum s not possible to repalce the graphics card because it s attached to the motherboard.
    [Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13]

    Here are several interesting information:

  • Resolution of the different native screen after replacing the LCD screen

    I recently had my HP Pavilion DV7 laptop screen replaced after getting a crack in it. He was sent to HP for repair and she came back yesterday with a new brand, screen exactly like my old. While the screen looks the same as the old, when I started, it is a completely different resolution. On the old screen that broke the (maximum) native resolution was 1600 x 900. However, on the new, the (maximum) native resolution is 1920 x 1080. I'm still able to go back to 1600 x 900, but when I do the text becomes blurry. I suppose I could use the 1920 x 1080, but it would take a lot of time to get used to it, especially since I am using 1600 x 900 for two years. So my question is, why is there another native resolution and is it possible to fix the blur with 1600 x 900? I don't understand why all this is happening, because the screen looks exactly like my old, same size and all. I don't know of changes to software that took place or the other, all what has been messed with to my knowledge was the physical display.

    Thank you!

    Hello:

    From the sound of it, HP has replaced your original screen with better resolution by mistake.

    There is nothing you can do except to report it to the support of HP and ask to the screen to be replaced by one of the same characteristics as yours, or you will have to get used to the larger screen real estate and more small text and objects, or use a different resolution which may be more attractive to you.

  • Satellite L750 - scuffed or scratch the LCD screen

    It is a strange. Last night, I (foolishly) used on the back of my finger to remove dust on the screen. This could cause wear on my skin and itch of my nail brand.

    I then used a white cotton t-shirt trying to wipe (not being able to find my normal cd sheet), but it did not really work so I added a small amount of water which it (I'm guessing it wasn't a good idea to use a t-shirt anyway).

    I then used a new t-shirt that I thought that it was not a good idea to use the old. In natural light, you see nothing, but if I turn off the lights and pointing a flashlight on the screen I can see what looks likely to be:

    (a) water
    brands (b) water and SOAP (washing powder that was in the wash t-shirt)
    (c) the scratches
    or even
    (d) a very slight scratch in the surface I have tried to clean

    I tried to clean this area several times that probably made things worse.

    This area represents 1/14th of the screen and the problem is really visible when a torch fire is shone on the screen and the room is dark!, so it's not obvious in the natural light.

    The laptop is brand new, which is what makes my own mistake even more unbearable. I'm puzzled as to what the solution might be and saw cela, but think it's exaggerated bass:

    [http://www.ehow.com/how_8596338_remove-scuffs-lcd-screen.html]

    Any ideas on how to save me from a stupid mistake?

    Hi mate

    I clean my LCD (portable computer and TV) using a Microfiber cloth and special cleaning for LCDs liquid which I could buy at my computer dealer...
    That s all and in my opinion, it's good enough to clean the screens.

  • How to replace the LCD screen Flex cable for a HP Pavilion dv4-1220us

    Can someone give me a step by step procedure replacing the screen Flex cable connection without disassembling the entire computer

    Lanny1 wrote:

    Thanks for the manual, I am waiting for cable to arrive. This whole process can finish by the enemy who me to try to replace the cable. I can finish with new computer

    Hello again!

    You are the very welcome.  You need to update with the results.

    Have a great day.

  • Replacing the LCD screen

    Hello, so I will try to buy a new screen LCD for my netbook Acer aspire one. My model number is 756-877BCrr, but if I buy something similar to this, like for example, a model number that says: 756-877BCKK, it could still give me the same product or I need to find the exact same model find my LCD? Help, please!

    No problems. Simply choose between glossy or matte.

  • Beep codes 8 (redirect) it is time to replace the lcd

    Hi guys, I have dell vostro laptop 2520 integer October 2013, the warranty period is over recently I placed a problem where my laptop gives 8 beep codes. I did the test LCD but still healthy.  It's time for me to replace the lcd screen or all can be done without replacing. If this is not the case, how replacement cost. Thanks awaiting response.

    Handsome of Ganesh,

    (India)

    As you have a laptop, better make this laptop in the computer Forum post here:

    http://en.community.Dell.com/support-forums/laptop/default.aspx

    Bev.

  • Satellite A300 - grayish colors on the screen

    Where to play games on my Satellite A300 (PSAGCA-02W010) and looking at photos of all colors seem a bit dull and grayish. When I called they said them it could be "limits the display" and I could have looked but I would be charged $120 if it was because of the limitations, I was wondering if anyone else has had similar problems with screens.

    It looks like my companion of hewlett packard LCD display which is very old.

    Any advice would be helpful!

    I have Satellite A300 and colors on the display are clear and bright.
    What games do you play? Something in the dark?
    Have you noticed the same thing if you use Vista OS for the daily work as Web-based applications or in the office?

  • Re: Replace the LCD Satellite A505-S6960

    Hello

    I bought a replacement LCD screen for my satellite a505-s6960.
    I can't pull the old a.
    I unscrewed several screws on the bezel.
    However, I can't get out of the bezel.

    Any ideas?

    Take a look at irisvista.com. you will find information how to remove the LCD screen. Perhaps, you will find something useful

    See you soon

  • Satellite M30 - how to replace the hinges?

    Hello!

    Has anyone replaced the hinges on Satellite M30? Any help or a link to a manual would be useful.

    Thnx!

    Hello

    Unfortunately, there is no manual maintenance on the page of Toshiba Europe. Only the authorized service provider got access to such manuals.

    I found this page:
    http://www.irisvista.com/tech/laptops/Toshiba_Satellite_M35/take_apart_notebook_1.htm

    But I put t know if it will be useful for you.
    Generally, I have to say that the replacement of hinges is not easy. It s really complicated because the laptop must be disassembled.
    You must remove the mask of the display first and then have to remove the LCD screen before you could see the hinges.

    To be honest I don't recommend trying to replace it with your own hand because you may damage other parts.
    I recommend a visit to a local technician for laptop and I would like to ask for help.

    Welcome them

  • Please help with replacing the W700 screen

    I'm at the end of my mind here, so I really hope that someone can help you. First of all, some background: I work for my part, repair and maintenance of computers, and I have a client with a Lenovo W700 requiring a new screen. The original had been broken.

    Seemed easy enough, so I ordered a so-called compatible more than a month. I installed it and it did not work. I sent a replacement. The replacement does not work either. I thought at this point, that a genuine part of Lenovo would be better than a "compatible" by someone else. I went on eBay and found the original part.

    It does not, almost - but the backlight does not come on. I can vaguely see what is on the screen, but that's all. I sent a replacement, but the replacement has the same question. But here's the kicker: the original BROKEN screen backlight works normally.

    What happens here? Y at - it a setting I missed, some rider, I need to clear, or is it possible there is something wrong with the machine? I need a definitive answer for my client, but here, I'm stumped.

    I can't really diagnose of 3000 miles away, but you can certainly damage the motherboard by breaking the screen. It is more likely with the screens LED backlight, but it is possible with a CCFL display like yours. There is usually 2 fuses (F7 and F8) that control the backlight. I don't have a motherboard of w700 to look at for more information. On most machines, they are on top of the room near the connection of the LCD screen. You can have one or two blown fuses. Most of the shops don't want to or cannot replace the fuses. You need good equipment. It is not a job for an iron solder 'Radio Shack'. Unfortunately, you can watch replacement motherboard, which is a big problem for this model.

  • Tecra M2: Can I replace laptops LCD screen SXGA +.

    Anyone know if it is possible to change the standard XGA screen, I have in my Tecra M2 with a screen SXGA +. Do I need to change anything other than the LCD?

    Thank you very much.
    D

    Hello

    As far as I know, that laptops come with a different hardware configuration. The same series of laptop computer can be delivered with the screen XGA and SXGA screen +.

    I think that you can replace your TFT screen to the other, but the display size should be the same.
    I guess the Tecra M2 needs a 14.1 screen.

    But why do you want to replace the laptop screen? First of all, you should know that the replacement of the screen isn't easy and it should be done by a technician or a person who has a good laptop experience. In addition, the new view is not cheap. You have to spend about $ 350 for a new game and I think that it s not worth.

    But it's you choice buddy

Maybe you are looking for

  • Every Friday, the localstore.rdf file seems to be changed.

    Every Thursday evening, I leave the computer to do a full scan of the system. When I launch Firefox 21.0 (and older versions too) Friday morning, all my settings are gone. A few weeks ago, I learned about localstore.rdf and I've saved a copy and now

  • Problem of bike E Restarting

    My bike E restarts frequently. It is to have this problem for 5-6 days. More often it is restarted when I enter the lock on the screen or slide it to unlock. Sometimes when I press the screen lock button it will show the power / option aircraft and i

  • DAQmx generating triggers TTL and triggered read it

    I am running LabVIEW 2013 on a Windows 7 PC and I use a card PCI-6251 DAQ with a BNC-2110. For my application, I need to generate triggers TTL (for example, with a frequency of 1 Hz). At the same time, I need to run data to HAVE which is triggered by

  • Probe Watch window missing?

    Hi all I worked on an installed system with LabVIEW 2013. It worked all fine then one day I decided that I needed some files I had recorded in a version more recent (2014). So I downloaded the latest version of LabVIEW (2015) and installed. Opens the

  • How to uninstall windows Defender?

    How to uninstall windows defender?