Satellite A300 - scroll function does not work

Similar Questions

• My Lenovo ThinkPad(red scroll) scroll function does not work in the new Firefox 4. It worked very well at point 3.6. Can you please fix this because it is a very important feature.

  (Middle button) scroll feature does not work on the new firefox 4. For this reason, so I need to move the scroll bar to move the page. It's very irritating problem, if you are a guy who uses the middle button to scroll. Can you if you please fix this...

  Thank you!!!

  I've updated to Firefox 4.01 today and the Center knob on my Lenovo T400 does more. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 by http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html , then uninstalled the 'Thinkpad Ultranav Driver' to add/remove programs, rebooted and then installed the update utility and driver (another reboot) and now it works perfectly.

  So happy to get it working again.

• Satellite A300-1NO - webcam does not work, but the LED lights

  Hello!

  I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

  Is there any solution for this?

  > Is there any solution for this?
  I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

  I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

  One more thing: have you noticed this problem in the first moments after installing Win7 or later?
  Have you installed something that may be the reason for this?

• Satellite A300-1BZ - microphone does not work - need driver

  My microphone does not work & I can't find what kind it is to locate the pilot, can assits anybosy please?

  Hello

  The internal MIC is part of the webcam.
  Next to the sound driver, you will need to install the Chicony webcam software.

  You could test the microphone using the webcam software there is an option that allows you to record the audio stream

• Satellite A300 - 1 2 does not work with 3 GB or 4 GB of memory

  Does not work with 3 GB or 4 GB of memory, only 2 GB!
  And if I plug a memory in bank1 2 GB module (bank0 is empty) - it's doesn't work too!

  He arrived with 3 laptops. (Sorry, my English is not good :))

  Have you thought about a fact that the phone doesn't support 3 GB or 4 GB of RAM?
  Isn't it?
  Maybe you should check the manual of the first user that is preinstalled on your laptop.

  I think you would find information very important.

  Equipped laptops Intel Mobile GL960 chipset is supported by the maximum memory capacity of 2 GB.
  As I m not wrong not your laptop was equipped with chipset Intel Mobile GL960 the case must therefore be clear now. or not?

  Also is important to know that you will need to use always first bank/slot memory (bank0) If you use a DEAD memory module!

  Good bye

  I think that you can assign 10 points ;)

• Satellite U400 - touch-pad scroll function does not work

  After installing Windows7, the scrolling feature no longer works.

  New driver are installed - doesn t work
  I tried to install the vista driver - t doesn't work
  FN + F9 are enabled.

  I put t know what could be the problem.

  Any ideas?
  Thank you
  Nik

  > New driver are installed - doesn t work
  Have you installed Synaptics touchpad driver?

  Open the properties for Synaptics and check if this option is enabled correctly.

  By the way: FN + F9 has nothing to do with this specific option. Using this key combination you can simply toggle touchpad in general.

• Satellite A300-1MC - recovery does not work

  I have a Satellite A300-1MC. It does not start in windows is right there with the Welcome screen. PC diagnosis indicates that the hard drive is faulty. I replaced the hard drive with a MK3276GSX Toshiba MK3252GSX - both are 320 GB.

  When I insert the recovery disc I get the following message when disk 2 is running "insert the next recovery means that contains the D:\08008XSP6 file. STORMWATER MANAGEMENT.

  Any ideas where I'm going from here? »

  Hello

  Are you sure that you Recovery disk was created correctly?
  This recovery disk function properly in the past?

  You label the discs properly?

  It seems that there is a problem with the recovery disk.

• My touchpad scroll function does not work in Firefox 4

  4 years Dell Inspiron 1520 with a Synaptics touchpad, running XP. Just downloaded FF4 last night, now discovered that my scrolling on the touchpad function no longer works. It's very irritating. If no fix is available, how to go back to the previous version of FF?

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.

  By the way, I recommend you visit the Plugins check page and update your plugins. You are potentially expose your system to attack with some versions you have installed at the moment. Their update can also solve the problem with your touchpad.

  In case the previous steps do not resolve the problem for you, you can return to the previous version and secure that 3.6.16 as follows.

  1. Go to Download Firefox v3.6.16 and download it to your desktop.
  2. Then go to add/remove programs, scroll down to Mozilla Firefox and remove it, choosing to keep your bookmarks, etc., the customizations (don't tick the box).
  3. Reboot and delete the folder called Mozilla Firefox at this location: C:\Program Files\Mozilla Firefox
  4. Finally, run the downloaded installation file.

• Satellite A200 - scrolling features does not work in Windows XP Home edition

  Hello

  I bought my Satellite A200 (psae3e) with Vista 3 months ago. I sent my computer to a laboratory and asked them to install XP. Well, everything seems to work outside scrolling on the touchpad.

  I tried everything to reinstall the sinaptics driver and the Alps to dig in any configuration. I could find associated with the mouse in the control panel. Also tried the FN + f12 key (supposed to turn the roll on and outside) without success.
  Any help is appreciated.

  Thank you
  Lee.

  I can just say that I installed several times friends WXP A200-1CR and everything was OK. I'm really surprised that you had this problem. In any case, it is important that the problem is resolved and you can use the scroll function. ;)

• Satellite M200 FN function does not work after the downgrade to XP

  Hello
  Recently, I have donwgraded my Vista to XP on Satellite M200 home but the Fn works for mute, brightness etc, don't work.
  All solutions?

  Thank you.

  Hello

  First of all, I must say that the Satellite M200 cannot be a European model for Toshiba laptop.
  I didn t find any Toshiba XP drivers on the European driver from Toshiba website.

  Eventually he s Toshiba U.S. laptop series or model Australian for Toshiba laptop.

  However, I think the buttons FN don t work on Win XP because the correct driver is missing and not installed (modules, etc) or the BIOS does not support the XP completely.

  I noticed a similar problem on a laptop A200. After installation of XP the FN buttons didn't work, but after update of the version of the BIOS XP I get the FN feature

  If both is possible
  I put t know if an update of the BIOS especially for Win XP is available but you can check it out, if it is not available, you will need to use the laptop without the FN buttons feature s.

  Good bye

• Satellite A300 graphics card does not work

  Does not my graphics ati mobility radeon hd 3470, only the blue colour works on it and the display of the laptop is not working too, I need to plug a monitor so that I can work with it? Can I replace it? If so where can I buy a graphics card for?

  Hi paulik123,.

  If you also have a problem with an external monitor, there seems to be a problem with the internal graphics card
  Did you notice the same problem when you get into the BIOS?

  As Akuma writes you can contact a service provider authorized in your country. Guys are able to replace graphic card/motherboard for you.
  The list of aspic, you can find here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

• Satellite A300 FN + F5 does not work properly

  Hello
  I have a Satellite A300, PSAGCA-09U01N.

  I would like to connect a coard S-video from my laptop on my TV, and when I press FN + F5, I don't get the icons appear along the top of my screen _anymore_.
  I always get the plug S-video works, but going from normal setting (just laptop screen) by other modes ('laptop screen + TV' etc) is very slow. Can someone please.

  Hello

  Hmm... If the icons don't appear if you press a FN key you must reinstall Toshiba value added package if you use Vista or Windows 7. You can download it on the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com

  Value added package controls the FN and enlightenment for example keys in order to check this!

• Satellite A300 - Chicony webcam does not work after upgrade to windows 7

  I'm frustrated so I came here to see if anyone knows a way to help solve this problem.

  I have a Toshiba Satellite A300, which came with Windows Vista 64 - bit pre-installed. After about a year or two to have the laptop, I decided to upgrade to Windows 7 64 bit. In the process, I believe that the driver of my webcam (Chicony usb 2.0 camera) has been eliminated.

  When I go into the Device Manager in the Control Panel, the webcam is not listed; nor is "imaging devices."

  I tried to download the driver manually, but I get an error message "Webcam open fail." Restart the computer or the camera. »

  My computer has registered my webcam as 'unknown device '.

  If anyone knows how to solve this problem, please, I beg you, let me know.

  > My computer has registered my webcam as 'unknown device '.
  > I tried to download the driver manually, but I get an error message "Webcam open fail." Restart the computer or the camera. »

  This means that the the webcam driver is not installed correctly.
  Visit the page of European driver of Toshiba and install the software/driver webcam just for this model of laptop.

  If the installation fails, restart the laptop and the tent.
  This should solve the problem.

• Satellite A300 - startup repair does not work

  When I went to use the Startup Repair option in the advanced boot options at startup that he told me that the application cannot run and shut down the computer.

  I have a laptop Satellite A300-1OM.

  As far as I know, this option has nothing to do with Toshiba and this is the Microsoft function.

  What is the problem with your A300?

• On Satellite A300-1MX webcam does not work properly

  After my windows Vista system crashed 16 December 2011, I had made recovery.
  After that, I have not found any driver for the webcam on the computer laptop everything. On the Toshiba support page, I finally found the 1.7 version, but this does not at all!

  He always appears: driver Webcam open fails, restart the computer or the camera. Since it's built in camera I tried with the restart of the computer, but which did not help at all. So I tried with the option to repair the driver with Install Shield Wizard. The program has done something, but without success.

  So I uninstalled and reinstalled and it did not help at all!

  Someone has an idea?

  Hello

  Found an article in the knowledge base of Toshiba which describes this error and provides a solution to this problem.
  + Why displays the error message: "Webcam driver open fail. Restart the computer or the camera. » ? +
  + http://aps2.toshiba-tro.de/kb0/OPT84026F0000R01.htm+

  But its related to Portege M600 and Satellite U300 only.
  However, you should also try to perform a BIOS update. After that, set the BIOS to default settings and save the changes. Then try to reinstall the software of webcam once more.

  You should also check the Device Manager. Here in Device Manager that the webcam should be recognized as a USB device, if this isn't the case, then it means that the webcam was not recognized by the OS and that means there could be a hardware problem

  As far as I know, the webcam is connected to the USB controller on the motherboard. If the cable connection is lost, then the webcam is not recognized in Device Manager; or as a USB device or an unknown device.