Satellite A300 starts sometimes like when you turn it on

Similar Questions

• Satellite A100 has sometimes unresponsive when you turn it on

  I have a computer laptop Satellite A100, Centrino Duo. Sometimes I have problem when you turn on the laptop. The computer stops responding while it is turned on and when I reboot without disk scan is started which is usual when windows does not start successfully.

  Sometimes the computer starts and I log in the system but then the screen turns white and even when no disk scan is started when I restart the system.

  Pls advise.

  Hello

  In my office, I have the Satellite A100-504 and so far, everything is OK. I didn t notice something similar to described issue. Have you noticed this problem since the first day?

  Can you please tell me what A100 you have exactly? Is - this WXP or Vista preinstalled laptop?

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• Satellite A300 PSAG4E - no sound when you plug an electric guitar

  Hello everyone!

  I have a very difficult problem. I've got model Satellite A300, PSAG4E its short no, with Windows XP SP3 installed.

  The point is that I need to plug in an electric guitar to my computer and once it is plugged in, RealTek HD sees him but produces, records or not distinguished any sound.

  Everything is on, then I'm afraid that this isn't my inattention which is to blame.

  In case someone already had such a problem with guitar or a microphone plugged into the laptop, please inform me how you managed to eliminate this kind of things.

  Thank you.

  On my laptop I have Realtek HD Audio Manager also, but there is no option for registration. When the external microphone is connected Manager I see info on Realtek audio devices reloading and the microphone is recognized correctly, but in my opinion this Manager has nothing to do with the record.

  For the record, you need other software. In Vista, you have small tool called recorder of sounds. I tested it on my laptop and the sound will be recorded correctly.
  Can you please test it too?

  The fact is the external device is recognized correctly, but I think for sound recording, you need additional software.

• Satellite Pro L500 stuck when you turn it on and got the loud noise

  I use Toshiba for a long time, this is my 3rd Toshiba laptop (I bought it in June 2010), today I bought the helmet, when I plugged it in, it did not work. (When I talk with my friend through sky, I use the laptop speaker instead) Then my friend got me to download a driver for the sound.

  After the download, the helmet worked perfectly. BUT the speaker on the laptop did not work. Then I restarted computer again and this time when you turn on, it's stuck. stop boot on Toshiba logo later process, there are peep sound (not speaker, he is very strong), I can hear it from the inside. I can't do anything else, JUST close.

  Please help or advise where can I take my laptop to the service because I think that if people reply to my post and I don't know if I can fix it myself.

  I'm going overseas week next to the presentation and need to use the laptop. Do you think that if I take the laptop to the center of toshiba, they immediately understand problems? I am now using my old toshiba, and it is slow to make any presentation.

  Hey Buddy,

  You use normal headphones with headphone jack or USB?
  Headsets with headphones are usually easier handling in my opinion.

  In any case, at the time where your computer laptop doesn't boot and stuck on Toshiba logo, right?
  In this case, you must remove the battery and the AC adapter at a time and test it again.

  Check this box!

• Stor.e TV + loader error keeps coming up when you turn it on

  I experienced ongoing problems accessing the hard drive. Error message "No Loader" keeps coming up when you turn it on.

  The so-called 'solution' to this problem on this forum is to open the box and play with the cables. While I had some success with this method initially, disassembly of the box 10 times a week is not on.

  In desperation, I tried something else.
  When the message no. Loader is in place, I pass in the box and the new on the remote control.
  After 2 or 3 times, and then the folder of the HARD disk appears generally.

  I did that constantly now with great success. However, this suggests that the error no. Loader is NOT a mechanical connector with the hard drive problem, but (as usual) poor software (what else?).

  Dismantling of the unit is shut down for an extended period of time so may explain why this technique works.

  Put the unit on and off the power several times also solves the problem of file D are not on the network even if Win7 shows shop-TV-Plus as a mapped drive on NTFS (but can not find the file D).

  See the resemblance?

  Another thing that exacerbates the problems is poor ventilation of the device. The first thing that happens with this device, it's rubber feet sticky garbage fall.

  While this may seem trivial, the ventilation slots are under the device and will be blocked if he has no feet. I live in a hot country so this appliance gets very hot and behaves even more erratic, unless it is well ventilated.

  Ideally keep well away from other units and preferably sitting it on a small box in itself with the vents in many exposed.

  I always also have problems to read files FLAC, MKV. The unit sometimes lost synch with files FLAC which generally play OK and crashes or causes a large noise or white noise on the speakers (dangerous).

  Some just MKV files play quite although VLC reads. There are many other inconsistencies, but these are more boring.

  Everyone knows these problems or someone at - it other solutions for these problems?

  I don't think we can expect another software upgrade from Toshiba? Your dreams, pal.

  I m not Stor.E + owner and can not say much about the issues mentioned, but the first sounds of mentioned problem (error no. Loader") for me much more like a hardware problem as a software related issue.

  Files mkv seems to be supported.
  The mkv must be encoded in H.264 and MPEG-4 format
  This is what I found on a Web page.

  In addition, there seems to be an update of the firmware

  [3.5 inches StorE TV + ROM Image 2.12_UI1.0 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 271 & selSeries = 254 & selProduct = 6350 salt ShortMod = null & language = 13 & selOS = all & selType = all & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 80742 & DISO =-1 & driverLanguage = 42]

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• I have error vowsem216dll come often when you turn it on and when you perform updates

  I have error vowsem216dll come often when starting up and when you perform updates today has 32/ntdll.dll error. How do I sort them?

  Many had / have Windows 98 so far.  He may not be able to access most of the internet, but it works.

  You upgrade the computer to another operating system platform?

  Windows XP is more supported by Microsoft but as long you are able to locate the drivers/software to operate, do. Windows 8 is developing so I wouldn't waste my money on Windows 7 right now.

  Restart the computer and the logo of the manufacturer, start typing F8

  Select Mode safe mode with networking

  Download the following tool and run a full system scan to exclude the malware.  If your system is infected your anti-virus software will have been compromised.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  You receive messages such as:

  Rundll32 - this program has performed an illegal operation and will be shut down.

  RUNDLL caused a General Protection Fault in module MMSYSTEM. DLL to 000's: 00000032

  Search for a file located in c: \ windows------vowsem 216.le dll

  After that the file is associated (application/program)

  The only reference I can find about vowsem216dll is on yahoo or pharmaceutical products of brand vowsem responses

  http://UK.answers.Yahoo.com/question/index?QID=20081001095149AAvpVDo

  Start > type MSCONFIG

  Search for list of vowsem and uncheck the box

  Click on apply, Ok

  Restart the computer

  Check do not show me this again in the Configuration window.  It will show at startup, and except if you check the box to not show it will nag.

  Click Start > run

  Type System.ini

  Click OK

  Search for mmsystem

  If this line does not exist, add it.  Save and close the System.ini

  Restart the computer

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• Satellite P100 locks when you turn on the WLan switch

  Hello

  My Satellite P100 turns off.
  It would not restart until I turned off the switch wireless lan.

  When it works, if you turn the switch back to a black screen occurs.

  Anyone can shed some light.

  Thank you

  It looks like a hardware problem.

  So in your case, I'd go to an ASP. Technicians can check your laptop and share the material if necessary.

  But before you go to a ASP try a BIOS update. You will find it on the Toshiba site and maybe this will solve your problem.

• No Satellite A300-1MC no sound when connect you to the LCD

  When I connect by Satellite A300-1MC HDMI port for my Toshiba Regza 37 "AV LCD series 37AV555DB and play a movie the sound comes out the laptop and not from the TV...?

  I have to do something to the settings? I tried other HDMI port and have the same problem...! Please can someone help?

  Do I need an another audio connecting cable? I used a VLC Player on the laptop, if this can be the problem?

  Any suggestion is welcome.

  Thank you

  Hello

  I checked Toshiba basic knowledge about the Toshiba support page and found some interesting documents that can help you:
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm - This document is written for Qosmio laptop but the principle must be the same.
  Is under audio playback are peripheral digital (S/PDIF) or HDMI output?

• My computer takes 9 minutes to start when you turn on. Where can I find the system configuration to abandon some of the start up programs that I don't need.

  I said the reason that my computer takes 9 to 15 minutes to complete the commissioning is there are too many programs that start automatically when I turn it on. They said to click on start and type system configuration and deselect some of the programs to start automatically. I typed in the run dialogue box but nothing.  How do I know where to find it and can you tell me which ones I should NEVER disable? Thank you.

  You type: msconfig in the Run dialog box.

  Under the Startup tab disable this you never or rarely use.

  You will always be able to use them whenever you want without going back to msconfig.

  On the Services tab, click Hide all Microsoft Services, and then choose the ones you want to start when you start your computer.

• Satellite A300 - starts, but I don't know why

  I recently bought a Toshiba Satellite A300 and the following events occur:

  I turn off the phone properly, I close the lid, and sometimes with the valve closed the laptop starts normally, both the battery and without. I went through all the power options, and I put that closing the lid do nothing if this was the case. For some reason, Notepad starts do not know why. Perhaps, it is important to update the BIOS?

  I had one of you '? I had many laptops and never exceeded. I hope you tell me clues.
  Greetings and thank you very much.

  Hello

  Then you have already solved the problem?

  If this isn't the case, you should try to disable the wake on LAN functionality that you can find in the BIOS. In my case it worked.

• Satellite A300-15 b crashes when Vista launched

  Hi all
  I only got a Toshiba Satellite A300-15 b for two months, I've had no problems until yesterday, when occurred the following and I don, t seem to be able to remedy.

  Sequence of events

  (1) start
  (2) connect
  Windows desktop 3) lance
  Warning 4) toshiba recovery disk
  (5) after about two minutes of running windows, the screen goes to linear lines (it looks like a horizontal puzzle of the screen)
  6 machine) will now not close or answer unless the Start button / Stop button for an age

  I have re-installed windows Vista that seemed to solve the problem last night, but when you use this morning same sequence happened.

  I ran the check disk of F8 and a restoration of systems

  Any ideas?
  I am running Vista, the only program I have installed/activated latley windows mail and an update to I-Tunes.

  Help, please!
  Jeff Rouse

  [email protected]

  If you have reinstalled Windows Vista with the Toshiba recovery image and then you have the same problems, you should check your Satellite to an ASP (authorized service provider).
  I think that it s a hardware problem.

  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  I'm sure they will help you.