Satellite A300 - stopped to ask fingerprint logon

Similar Questions

• Satellite A300 stops without reason

  Hello

  Since the transition from win vista to win 7, my Toshiba Satellite A300 stops without reason.
  To install win 7 at Toshiba, I downloaded all the drivers for Win 7 and I installed.
  The bios has been changed.

  What should do?
  Thank you for your future responses.

  Hello Dustin

  Everything on this world happens with some reason.
  I have Satellite A300 too and that you are using Win7 32 bit for 6 months. It works perfectly, and so far I did not notice a problem with it.
  To be honest I don't know what you did exactly, but if you want to have fine under Win7 Satellite A300 install Win7 clean version and other stuff like follows:

  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works well but lacks some drivers

  Added Vista tips:
  Toshiba - help - working properly
  -Card reader - installed correctly
  -Webcam driver for A500 - tested with Skype - works correctly.
  Driver - Synaptics

• Satellite A300 stops when the power adapter is connected

  Hello!

  Yesterday, I bought a new Satellite A300. I plugged it in, worked some time with her and then I decided to stop it while it was plugged.
  The computer has stopped working, but in a few seconds, he started alone.

  I tried to do it while it was disconnected and there is no problem, but when it is plugged the problem persists.
  I would be happy if someone can help me!

  Thank you very much!

  I would try a BIOS update. You can download it here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite A300 stops when the power adapter cable

  Hi people

  When I connect the power cable for my toshiba satellite a300, it stops immediately. I can use it on battery normally without any problems.
  When I boot in safe mode, it works fine without any problems with the AC adapter plugged into the laptop.
  Operating system is Windows Vista
  What is the reason? What can I do to fix this?

  Thank you

  Can you use it for laptop with AC power only when the battery is removed?
  If so, boot up your laptop and when the operating system is loaded to put battery inside, wait a few minutes and disconnect the power supply.
  Plug it in again and let us know if the same thing will happen again.

• Satellite A300 - USB port and fingerprints issue

  Hello

  I'm starting this thread that I have problems with my fingerprint reader and my USB port.

  I have a Toshiba Satellite A300-C01 laoptop. It was purchased in September of last year. I have not used it much except for the first week I had it, I've been away (Overseas), and I didn't take my laptop with me (I took a former I). There is no chance that the laptop has been used so that I was absent because I live alone and that the cell phone was simply sitting in the computer room.

  I started using it again about 3 weeks. Around a week ago, I noticed a pop-up (bottom left of the screen) telling me that a USB port had problems. I put my FlashDrive on the first USB port and at first, it was not recognized. I tried with another flash drive I have and who has been recognized. However, every time I start the computer I get who pop up telling me that there is a problem with the USB port.

  I also met a problem with the fingerprint reader. A pop up appears in the lower left side of the screen and say that the fingerprint reader was having problems. Happened since then that the problem with my USB port began to appear. About an hour ago, I checked the Device Manager and the fingerprints fingerprints/biometrics scanner does not appear in Device Manager.

  Has anyone else had this type of problem?

  What did you do to solve it?

  I would appreciate comments that I have no other choice at this time until Monday when the Toshiba support is available (they are available Monday to Friday).

  Thanks in advance,

  Deanne.

  First of all, you should try to update the chipset drivers and software of fingerprint. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If it doesn't work you should try to update the BIOS. Check the Toshiba site for an update.

  In the worst case, you must reinstall the laptop with the Toshiba recovery disc. So you can make sure if it s a hardware issue or not.

• Satellite A300-M01 - Questions about fingerprint software

  Probably a stupid question, but however.
  I realize the TrueSuite Access Manager Fingerprint Software is probably OEM, but.

  I want to do a clean install of Vista Ultimate (I get it for free at my University), with seven Beta and other Fedora/Ubuntu/Debian installation. I want to clean it Vista install to get rid of the nonsense bundle software etc etc that comes and loads up on startup with Vista but I do quite like the features that the fingerprint reader offers to me and realize that a facility would own it.

  From which it follows that I would like to know if it would be possible for me to acquire new software from somewhere, or recover from the current installation before you do a format and reinstall (or any other software free license which would provide features to my fingerprint reader, by the way).

  And then on a note side, is there anywhere where I can get the Toshiba Bluetooth / Networking Suite (which shouldn't be an OEM thing)? It would be very useful if the blown thing comes with a CD with at least all the things that are not on the OEM licenses and drivers for all the hardware, I would have thought it's too ask that everybody wants unnecessary bits 100 software from the start, but also limited time - watch 3 third-party software installed on their computer slowing them down , occupying their resources and wasting space (I know right? It's bloody hard to believe).

  The drivers and the software Toshiba will install in a generic version of Windows after you have installed the Toshiba Value added Package.

  You can download TruSuite and other software on the Toshiba site in the Support/drivers section. You can also save C:\TOSAPINS installation files

  If you do not want the additional software installed, why don't you just to uninstall and then run a registry cleaner like CCleaner?

• Satellite A300 - question of the fingerprint sensor

  Hi people

  I recently brougjt an A300 / / PSAGCA is a $ 2500 laptop 4 GB RAM separate viedo 500 MB and 2.5 GHz dule core chip double discs = 600 GB

  After only 2 weeks and a cleen installation of Vista 64 bit I canoe get the fingerprint reader work repeat myself "open canoe specified database. I tried going back to 32-bit but said the same thing. I tried all the available updates. This isn't what I expect of a company like Toshiba. This problem is well known on the net, I was wondering if they have a solution to hear again?

  Your

  Barry
  TO THE

  Hello

  If you created the recovery disc using the Toshiba recovery disc creator, you get exactly the same operating system that was installed by Toshiba!
  So if the fingerprint worked at first then it should work after using the recovery disk because it the same!

  But as far as I know the old fingerprint software doesn't work with IE8 or Firefox 3.0. Of my knowledge update has not realized yet.
  So it could be possible that updates the MS has muddled something and affected the functionality of fingerprint.

  I read somewhere that a new v.3.0.0.16 from Authentec fingerprint should support the internet browser more recent, but as mentioned above, he must be released in the near future.

• Problem with the Satellite A300 stop

  Hello

  I have a problem in my laptop stop. Whenever I stopped him it looks like everything is ok, but as soon as I close the lid it turns automatically on. It's very annoying. Someone knows the solution? Thank you.

  On LAN in the BIOS option disabled ' s wake up?

• Satellite A300 stops after 5 minutes of use

  Hello

  I recently had my laptop back on the Toshiba Warranty Service that my machine was not able to receive the juice when it is plugged in but it worked fine on battery!
  They replaced the motherboard and taken the power cable and the machine seems to work well!

  Now, I've noticed that when my computer is on and connected to the power supply, after about 5 minutes, or so it is cut!

  When I turn on the machine, it passes through the jargon "your machine has not extinguished properly!
  I also noticed that I'm not hearing any additional fan activity or feeling any flow of additional air that I used once to!

  Anyone think this could be reduced to overheating?

  The machine does not seem to suffer from this problem, so I'm just running on battery power.
  I'm getting a bit fed up if I need to return once again!

  All your comments are welcome!

  > Now, I've noticed that when my computer is on and connected to the power supply, after about 5 minutes, or so it shuts down! When I turn on the machine, it passes through the jargon "your machine has not extinguished properly! I also noticed that I'm not hearing any additional fan activity or feeling any flow of additional air that I used once to!

  Hmm, that doesn't sound good and I recommend you to contact the responsible ASP as soon as possible.
  To me, this looks like an overheating problem. If the temperature occurs at a critical level then the cell phone would power off automatically to prevent the equipment from damage.
  You said that you do not hear the coolant running modules?
  This could be a reason why the temperature would be higher and the laptop would be closed.

• Satellite A300-M01 - fingerprint - cannot open the sensor with Win XP

  Hello

  I got a Satellite A300-M01 with Windows Vista but my my software is very slow, so I'm a Windows XP Installer to put in. After that, the fingerprint reader no longer works the registration of fingerprints he'll only say 'Cannot open the sensor' and if you access the service of this device it says "specified device instance handle does not match this device."

  I already downloaded the driver for this sensor of isd.toshiba.com.au, but after the installation, the problem is the same. Any info is much appreciated.

  Thank you.

  Ray

  Hello!

  Have you installed the tools and all the other drivers of Toshiba?

  Search on the Toshiba site for a BIOS update.
  Maybe this can solve the problem.

  Good bye

• Satellite A300 - fan always runs at full speed after full stop

  When I stop the Satellite A300, the fan always runs at full speed.

  Hello

  What? Cooling modules run, even in this case, the cell phone is off?
  Press the power button for at least 4 seconds, then the laptop must be turned off.
  Disconnect the power adapter and remove the battery
  Wait about an hour and reconnect the battery and AC adapter
  Then switch on the device after a certain time of use of turning the unit off and check if the cooling modules would stop too

• Display has stopped working on Satellite A300

  Hi guys,.

  I have satellite a300 PSAg4a - 02500 m laptop. All of a sudden the display has stopped working on the laptop. I tried to plug in an external display, but it does not work also.

  I can't even see the bios screen not. Laptops normally, I hear no beeps during startup, just the fact that there is no display.

  This laptop has a M86 ATI graphics card 512 MB. Its out of warranty.

  All had a similar experience. Is it possible to know what could be the problem.

  Any suggestions would be helpful.

  Thank you

  Hey Tama

  I'm afraid there is a problem of serious material with your laptop from m.
  I like the graphics card problem.
  Usually if the internal screen would be defective, you should see all the external display. This is why I think you GPU is affected.

• TosIPCSrv.exe has stopped working on Satellite A300

  When I start my computer... (Vista) I have Toshiba Satellite A300
  I get a warning said: TosIPCSrv.exe has stopped working

  What it means? How should I do?

  Hello

  Seems the TosIPCSrv.exe belongs to the Toshiba S.M.A.R.T. Log Service.
  This can be found in:

  C:\Program files\toshiba\smartlogservice\tosipcsrv.exe.

  I'm not very well what is this process, but you could it enable or disable it in m
  MSCONFIG (type this in the window RUN) and check the startup and Services tabs.
  You need to find tosipcsrv.exe

• Re: Satellite A300-1J1 stops without giving me warning

  Guys please help me.

  My Toshiba A300-1j1 satellite automatically stops or stops completely without giving me warnings.
  I put t know if its hardware or software problem.

  My pc has been infected with the Trojan, backdoors and web32.agent a few days ago, but as I have full license of kaspersky internet security I managed to heal and now they are not frequent in my laptop.
  But still now and then my pc get shut down. What I would do.

  I will implement my vista Home premium with original image.
  I really Don t want to put vista.

  Please guys help me.
  y at - it another way to solve this problem.
  pls help me and let me know with your nice mail.
  My amiling id is: [email protected]

  pls help me.

  Hello

  Yes, that sounds like an overheating problem.
  If the internal temperature at a critical level then arises an internal sensor would stop the laptop to prevent material damage.

  Please follow the advice and recommendations posted by blakcPox to prevent these overheating!

  On the other hand, it may be a software problem, maybe the problem is related to the infection by the virus at the beginning
  That is why a new operating system installation can be useful too

• Satellite A300-243 - keyboard and touchpad has stopped working

  Hello everyone

  I have a serious problem in my Satellite A300-243. I installed a driver for external keyboard using a CD and once I rebooted both keyboard and touchbpad stopped working and to make any order, when I reached the vista welcome page.
  What should I do because you know that even if I can't get into the windows to uninstall this driver.

  Any way to do during windows startup?

  Hello

  Why you installed a driver for external keyboard? I've never heard of such drivers

  Anyway, you should try to start in safe mode and then you are able to remove driver external keyboard to the list of software. After I restarted in normal mode, the keyboard and the touchpad should work properly again.