Satellite A300 - Vista does not load, the computer does not start

Similar Questions

• Satellite A300 Vista - will not start cd/DVD with backup

  Hello world

  I have a big problem with Toshiba a300. Windows Vista is not starts.

  Watch only the menu with 2 options: first "fix the system" - when I choose this option 10 seconds later I see messeage: click OK to turn off the computer.
  When I choose the second option in my laptop restart every time.

  I tried after turning on the computer, press F8, but all the option in this menu do NOT fix the problem.
  I have no CV/DVD to my computer.
  After the first time I don't burn DVD with backup.

  I have really now how can I install system with recovery patriction. What softwere I need and how do I do it?

  Thanks for help

  Hello

  Sat A300 and other new models of laptops are equipped with HARD drive recovery option. This HARD drive recovery should allow you to recover the laptop without the use of all disks.
  In order to start the procedure for HARD drive recovery, you need to press F8. Then choose the first option called fix my computer. Then new window pops up and there you have to choose Toshiba HDD recovery. All that s.

  But if this procedure don't work (no matter why) then you will need to use the Toshiba recovery disc. If you n t create a floppy disk for recovery of a hand and the laptop will not start, then you will have to buy a drive for recovery of this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite A300 - Vista will not load successfully

  Hello. I am trying to start my computer laptop Toshiba Satellite A300 nephews and I have a problem. I tried 4 different vista disks that work fine on other computers, as I have tried
  for some reason, it will charge only with success

  copying files window.
  extension of the files.
  installation of features
  installation of the updates.

  He did all these beautiful but on the end of the installation it only up to 78% then stops and the custom fill no more. Please can someone help me as im banging my head against a wall

  Thank you

  Hello

  > ive tried 4 different vista disks that work fine on other computers, as I have tried

  It looks like something wrong with the hard drive. I recommend you format the hard disk with programs like Partition magic, Disk Manager Arcoins. You should make a disk bootable cd and boot from it to format the hard drive before installing Vista. Furthermore, you have formatted partition during the installation of Vita? There is an option to format the partition selected during the installation of windows. You see, I met some users who tried to install windows without formatting the selected partition.

• Satellite A300: Vista 64 bits after the new installation by using the recovery disk

  I have a Toshiba Satellite A300 A300 / M00 and when I got it, it had Windows Vista Home Premium 32 Bit. But after awhile, I started to have problems so I decided to reinstall Vista on my laptop. After crossing with the product recovery media, my system become so 64-bit.

  Was not my system suppose to have 32-bit when it was originally with her?
  If no, then how can I install 32 bit once more on my laptop like 64-bit gives me problems with the installation of some of my programs.

  If I need to buy a copy of Vista 32 Bit, where can I find the drivers for my system, because the product recovery media has all the drivers on this subject.

  Thank you for your time.

  Hmm. Your ad is a little confusing.

  Why would you say that Toshiba Recovery disk contains a version of Vista 64-bit?
  How did you check that?
  From my experience, the Toshiba recovery disc still contains the preinstalled operating system.

  Also as much as I know the new notebook from Toshiba are not delivered with the recovery disk, but with a HARD drive recovery option.
  This option allows you to reinstall the OS from the second partition of HARD drive recovery.
  Alternatively, you can use the preinstalled Toshiba recovery disc creator software to create the own recovery DVDs! And this recovery disk contains the same preinstalled OS!

  Good bye

• Satellite A135: Vista will not start after replacing HARD drive using the recovery disk

  Toshiba Satellite A135-s7403 HARD drive failed, I have replaced the 80 GB with a WD Scorpio blue 250 GB hitachi. When I try to restore with recovery disk came with the laptop, it passes through two discs 1 and 2 and starts with the start-up of windows for the first time and then runs to the greenish with the spinner blue screen please wait... thne black screens for a second or 2 and then back to spinner, please wait and then it appears the box "installation of windows could not configure windows to run on hardware. This computer' only option is to click OK.

  Where to click ok, you get an another msg that says "windows could not complete the installation, install reinstall windows. I tried like 50 times now. Startup Repair indicates the root = failure cause while the installation program is underway. I know that my drive are good, as I adjusted used then about a month when I upgraded the memory because the original memory 512 MB was not enough o well running vista.

  Hello
  To be honest I n don't know what the problem is there but can you get the original installation disc of Microsoft and try to install the OS, just to see if the OS installation will complete successfully?

• Satellite A300-U01 - do not have an ATI option using a right click on the desktop

  I have A300-u01; It has the graphics card ATI RADEON 3650.
  Well, I had Sat A205 which had the graphics card intel.
  When I use to do a right click on the desktop there is possibility for Intel graphics card but on my Sat A300 I don't have the option even with right click deskop.

  I saw an A300 Sat at the market and he had the ATI card and also had Option ATI with a right click on the desktop.

  With regard to the option ATI;
  This option is displayed only by using Windows XP.
  In XP you can join the ATI settings with right click on the desktop-> properties

  In Vista, you should find the ATI Catalyst in start-> all programs-> Catalyst Control Center

  What about the battery time;
  Battery working time depends on the use of the laptop and the battery.
  If you are running high-performance applications then the battery will last longer, not as an hour.
  You can extend the battery, time to work if you would be less light the brightness of the screen and would use a stronger battery with the value of my superior.

• Satellite A300 - Vista freeze using videoconferencing MSN

  Hello

  My computer laptop freeze when I m using MSN video conferencing.
  I can start a video conference, but after 15 or 20 minutes, the freezing of the computer laptop everything and I have to press the start for more than 5 seconds power button restart.

  I tried uninstalling and reinstalling messenger several times, I tried different msn messenger (8.1 beta) but it give me a note telling me that I needed some kind of code.
  I read a lot about troubleshooting with Satellite A300 Vista msn but I am new to using the pc.

  Friendlygiant

  Hello

  > but it gives me a note telling me that I needed some kind of code.
  Is what code exactly?

  What webcam you use with MSN?
  What is the internal webcam A300?

  In your case I would recommend the update to Vista everything. Please check if SP1 has been installed already.

  In my opinion, this issue may be related to the issue of software and updates are really important.

  Good bye

• Console buttons multimedia Toshiba Satellite A300-08WB do not work

  Hey all,.

  I reinstalled the driver and I restored my computer but the buttons backlit Toshiba multimedia Console still does not work.

  Any help appreciated.

  Cheers, Levi

  PS. would it not under warranty

  > I reinstalled the driver and I restored my computer
  This means that you have used the Toshiba Recovery disk?
  Have you created a Toshiba recovery disc at the beginning?

  I think that if you didn't use the recovery disc, then the question refers to the missing part of the driver or software

  But Satellite A300-08WB is not known to me what model number of the laptop is it?
  You can find the numbers at the bottom of the unit

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite A300-1HP is not in sleep mode after 30 minutes inactivity

  Satellite A300 1HP is not in sleep mode after 30 minutes inactivity.
  Windows settings are OK (I'm an experienced user).
  He goes to sleep, if I do it manually (by pressing the power button) - but not after inactivity,

  Any idea?

  Norbert.

  Hello, Norbert

  Maybe you should check the settings of Vista power again. I have too many A300 and everything works fine.
  I tested it with all three power plans. Have you done the same?

  Usually, I use the BALANCED power plan and enter mode standby 20 minutes correctly.

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• Windows Vista will not start up - keep getting the black screen

  I read through the questions answered similar questions and still can not past the black screen with windows vista.  It's on a dell inspiron 1525.  Also, it does not start in safe mode and I tried booting from the last good configuration and is still stuck on the black screen.  This just started a few days ago, and the computer was working fine until this date.  Can you help me?

  Hi Jimazona,
   
  1. from when are you facing this problem?
  2. any change in software or new hardware on your computer?
    
  Method 1:
    
  First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.
       
  Method 2:
      
  I also suggest you perform a startup repair and check if this solves the problem.
     
  Follow the steps below:
     
  a. Please insert the Windows Vista DVD and restart the computer.
  b. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
  c. Select your language settings, and then click Next.
  d. click on repair your computer.
  e. Select the operating system you want to repair, and then click Next.
  f. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
   
  Access the link below for more information on the Startup Repair:
  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
   
  See also:
   
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/   
   
  I would like hearing that the results back on your part about what happened after trying each method.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think. 
  

• Satellite A300 - 1 l 4 brings the remote?

  Satellite A300 - 1 l 4 brings the remote?

  You want to say if the Satellite A300 - 1 l 4A was delivered with remote control?
  The remote control is optional. Some A300 are equipped with remote control and some books don't stand.

• CHKDSK runs everytime I turn on my computer, complete control, the computer tries to start and goes back to CHKDSK every time. Does this mean that my hard drive is crashed?

  CHKDSK finishes control, complete control, the computer tries to start and goes back to CHKDSK everytime, it means my hard drive crashed? and if so, can I just replace the hard drive and then have my technical support help reload my data?

  Hi Karen,.

  ·         Since when are you facing this problem?

  You can check if this article helps.

  CHKDSK runs each time that you start your computer

• "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

  Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

  Hi JohnHorky,

  Step 1:

  First check and make sure that all physical connections on the computer are correct.

  Step 2:

  Alternatively, you can try to run a Checkdisk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Step 3:

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.