Satellite A300 webcam problem - CEC_MAIN.exe has stopped working

Similar Questions

• Satellite A300D - upgrade Vista - "Setup.exe has stopped working".

  Hello

  I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.

  After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.

  I tried to uninstall the manually, but I got the same message.

  These programs are;
  Setup driver Atheros
  Toshiba hardware configuration
  Toshiba supervisor password
  Realtek High Definition Audio Driver

  So I can't go ahead with the upgrade.

  Anyone know what could be the problem?

  Thanks in advance,

  Pouvez - TR
  .

  Hello

  Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.

  Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.

  If you did a recovery facility before the upgrade?

  Welcome them

• Satellite A300-243 - keyboard and touchpad has stopped working

  Hello everyone

  I have a serious problem in my Satellite A300-243. I installed a driver for external keyboard using a CD and once I rebooted both keyboard and touchbpad stopped working and to make any order, when I reached the vista welcome page.
  What should I do because you know that even if I can't get into the windows to uninstall this driver.

  Any way to do during windows startup?

  Hello

  Why you installed a driver for external keyboard? I've never heard of such drivers

  Anyway, you should try to start in safe mode and then you are able to remove driver external keyboard to the list of software. After I restarted in normal mode, the keyboard and the touchpad should work properly again.

• Expsviewer.exe has stopped working

  I watch the feather program and it was OK, can any one help with the problem (Expsviewer.exe has stopped working)? Thank you!

  Thanks for the reply. I solved the problem. I found the answer on this site which is really good! http://www.Vistax64.com/Vista-General/24342-XPS-viewer-not-working.html

  Solution! You may also be interested in the solution? Here's how I solved it!

  you need to go into your control panel and select Activate Windows
  Features on or off. Under Microsoft. NET Framework 3.0, you will see the
  an XPS Viewer option. Remove, uninstall, then reinstall it.

  Once again thank you to contact me! have a good!

• TosIPCSrv.exe has stopped working on Satellite A300

  When I start my computer... (Vista) I have Toshiba Satellite A300
  I get a warning said: TosIPCSrv.exe has stopped working

  What it means? How should I do?

  Hello

  Seems the TosIPCSrv.exe belongs to the Toshiba S.M.A.R.T. Log Service.
  This can be found in:

  C:\Program files\toshiba\smartlogservice\tosipcsrv.exe.

  I'm not very well what is this process, but you could it enable or disable it in m
  MSCONFIG (type this in the window RUN) and check the startup and Services tabs.
  You need to find tosipcsrv.exe

• Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working

  I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.

  When I try to install the update, I get a window that says Setup.exe does not work.

  Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.

  I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.

  Appreciate advice on how to solve this problem.

  Hello

  I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.

  I agree with the previous user, and I recommend to reinstall this software again.
  You may need to clean the OS before installing the Truesuite again.
  In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.

  Google and you should find more information.

  See you soon
  Jayjay

• I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. »

  Original title: webcam inspiron 1420

  I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. "I checked and it is said that it works correctly.  I also looked and found something that seems to say that the app crashed.  Any ideas?   Thank you

  BFM

  Hi BartMorgan,

  ·         What is the error correct mrssage?

  ·         Is - this "LiveCam.exe has stopped working" or "LifeCam.exe has stopped working"?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  You can also check if the troubleshooting steps to help you in the article mentioned:

   

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266612

  Method 2: Alternatively, you can try to uninstall and reinstall the drivers of webcam and check if that helps.

  Step 1: You can try to remove the webcam in Device Manager:

  a. click the Start button, in the start search box, type devmgmt.msc and press enter.

  b. in the Device Manager window, click view , and click Show hidden devices

  c. right-click on the webcam is installed.

  d. in the dropdown menu, click Uninstall or Remove.

  e. in the dialog box to confirm the device removal, click the OK button.

  Step 2: Also verify and uninstall the webcam again from programs and features program, if it is installed and then restart the computer.

  a. click Start.

  (b) in the search box to start, type appwiz.cpl and press enter.

  c. in the programs and features list, select the webcam program and Uninstall it.

  d. restart the computer.

  NOTE: After the reboot, the computer should recognize the connection of the camera and start to reinstall the driver.

  I hope this helps.

• When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

  I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

  Hello

  ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

  ·         What is the brand and model of the printer?

  You can follow the method below and check if it helps.

  Method 1:

  I would say as you put your computer in a clean boot state and check if it works.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

  Method 2:

  I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Hope this helps,

• "HPSF.exe has stopped working. This application has encountered a serious problem and needs to close. »

  I get the above error message on an old Pavilion HP desktop computer for a month (p6813w) running Win7.

  I see there are updates, but when I click on the HP Support Assistant w / 'recommended action '...

  He said HPSF.exe has stopped working and I need to click 'OK' to automatically restart the application.

  I click 'OK' and the window closes and does not restart.

  ALSO: it is said now, "HP Support Assistant can be run by a user at a time.

  Please go to the user who is currently using HP Support Assistant. Etc.»

  Anyone in the world can say that ?

  Thanks for aloud up-to-date solutions or you help can provide.

  Go to Control Panel, programs & Features.Select HP Support Assistant and uninstall it. Restart your computer after its withdrawal.

  Then, download the latest version for your machine from the link:

  http://h71036.WWW7.HP.com/HHO/us/en/pclc/articles/HP-support-Assistant.html?JumpID=ex_r602_go/hpsupportassistant

• "Plugin - container.exe has stopped working" error during installation of Firefox 36.0 via SCCM if Firefox is open during installation.

  When installing Firefox 36.0 via SCCM (System Center Configuration Manager), if the previously installed version of Firefox is open during the new installation, an error, "Plugin - container.exe has stopped working. A problem caused the blocking of the program works correctly. Please close the program. This problem occurs only if Firefox is open during the installation, otherwise the installation is successful. Note: I have included a taskkill to 'firefox.exe' in my installation script to stop Firefox runs.

  There are new logic in Firefox 36 monitor to stop crashes while the Mozilla Crash Reporter can capture data. This could have the effect of killing her task, I'm not sure. Maybe you have to kill plugin - container.exe before firefox.exe? I'm not familiar with SCCM and it might have a more graceful way to close an application.

• HPSF.exe has stopped working

  When I try to open HP Support Assistant, I get an error message that hpsf.exe has stopped working. Application has encountered a problem and needs to close. My warranty expired on 12/09/2012. HP Support Assistant disappears when the warranty expires. If this isn't what someone has an idea how I can fix?

  Hello

  It's nothing to do with your warranty ending, however this can be a fickle piece of software.

  Try the following.

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the computer.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• ATKEX_cmd.exe has stopped working

  

  

  Hi all

  I'm struggling with this problem ATEX for awhile now and still not found a solution myself.

  I hope someone knows the answer to solve.

  whenever I have start my pc I get the same error "ATKEX_cmd.exe has stopped working" around 5 times in a row!

  You can see a printscreen of it added to this post!

  I had personally never heard of ATEX so much, I searched on the web

  and did not even find why I need exactly.

  In any case, I came to know that it is in a part of my registry so it's like all the other parties 'binary codes.

  and it would probably be affected by malware because I never changed anything in my regedit on this pc so far.

  So I did a SFC scan and I did a few malware scans and scanned and fixed my registry with some of the best free products (like ccleaner and so on)

  There is no malware detected and the registry got some repairs (as always) and some of the binary codes that had to be quarantined or deleted had to do with ATKEX!

  but the same problem still occurring...

  I'm not able to find the ATKEX_cmd.exe but I found the folder named 1.01.02 under "C:\Program Files (x86)\ASUS\AXSP\1.01.02' witch contains 3 files named:"ATKEX.dll","atkexComSvc"and"PEbiosinterface32.dll"so as you can see the DLL is still on my pc)"

  You can also see the printscreen of it in my post

  I also ran into problems when I tried to update the BIOS of my motherboard asus maximus vii ranger, because apperently I need to rename the cap file before updating, I feel that this could be the cause, but I'm not sure what I should do now

  I'd appreciate if someone could help me!

  Thank you very much!

  Maxim

  Hello

  It seems to be linked to the Realtek drivers - are you game?

  http://Rog.ASUS.com/Forum/showthread.php?47776-problem-with-Realtek-HD-Manager-load

  http://Rog.ASUS.com/Forum/showthread.php?48938-Mei-drivers

  Edit:

  ASUS computer

  atkexcomsvc.exe runs as a service in Windows (asComSvc) from the bottom. This service runs under the SYSTEM account with extensive privileges on the local computer and acts as the computer on the network.

  http://www.boostbyreason.com/resource-SHA1-561eedde165abd24e6d170799332b78c162c19d5-atkexcomsvc-exe.aspx

  It is loaded by atkexcomsvc.exe on Asus computers

• UPDATE ~ 1.EXE has stopped working

  Thanks for any help on this;

  The error "UPDATE ~ 1.EXE has stopped working" arises for only 1 user on a server terminal server 2008 Enterprise 32-bit Edition. About 80 users connect to 4 servers on a cluster and present a single user is the lone wolf who gets the error message. He says it appears all about 30 minutes. I literally have no idea where to start.

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: UPDATE ~ 1.EXE

  Application version: 0.0.0.0

  Application timestamp: 2a425e19

  Fault Module name: KERNELBASE.dll

  Fault Module Version: 6.1.7600.16385

  Timestamp of Module error: 4a5bdbdf

  Exception code: 40010006

  Exception offset: 0000b 727

  OS version: 6.1.7600.2.0.0.16.7

  Locale ID: 1033

  Additional information 1: fc98

  More information 2: fc989e251a1dc78f16199b78d1e7814b

  3 more information: f3d0

  Additional information 4: f3d0eda1f28439ce691a4e21b0e9ba44

  If additional information is needed, please let me know. I'm happy to provide.

  Thank you all

  Hello

  Sorry for the delay in responding to this message.

  As you get this on the domain network, ask to view the query in the TechNet forum for better support.

  TechNet Forum

  Answer us if you need help with Windows problems and we will be happy to help.

• can't access games - onplay.exe has stopped working

  I can't access my games when I click it it says onplay.exe has stopped working windows is looking for a problem, but nothing does.  Can you help me?

  [Moved from comments]

  Hi Sue,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have problems with a game does not.

  1. what operating system is installed on the computer?

  2 what is a line or a game offline?

  3. If it's an online game then what browser do you use to access the game?

  Answer the questions to help you best.

  Good day!

• I received error messages saying that hl2.exe has stopped working.

  HL2.exe has stopped working?

  original title: hl2.exe has stopped working

  Hi 1patrick1!

  Thanks for posting your question.  Here is some important information about the hl2.exe that can help.

  HL2. EXE has stopped working the issue

  Game error: HL2. EXE has stopped working

  Important:

  Please read the FAQ in the link below to determine if your question should be directed to the developer of the game or to the Steam support:

  Third-party game support

  General troubleshooting

  Game crashes can have several different causes depending on your system. The best way to determine that the problem is caused by East follow this guide first:

  Troubleshooting game crashes

  Windows Vista users

  There are several patches available for Vista users and Vista users with Nvidia cards. We recommend that you follow the Guide Windows Vista in its entirety.

  Anti-virus software

  Some software anti-virus and anti-spyware such as Norton/Symantec, AVG 7.5, Avast, Spyware Doctor and Nod32 have been confirmed to cause the game crashes with Source engine games. If disabling your antivirus software or security is not enough, you can consider completely uninstalling these applications until an update is published by the developers of antivirus software that resolves these compatibility issues. More information found in the section troubleshooting game crashes FAQ linked above.

  Background applications

  Graphically intense games such as half-life 2: Episode Two and Team Fortress 2 require a lot of your system resources to operate. Having background applications being run while you play can often result in the game engine competing for resources with other applications system. Often, this can cause the game to crash because it is not free enough for the game to use system resources. Please follow the guide below for more information:

  Disabling background Applications

  It is also important to ensure that your system has enough available expanded memory. Please follow this guide for more information.

  Hope it will be informative for you.

  The respect of

  Anurag Shukla
  Microsoft Certified Professional