Satellite A300 - WLAN networks are not available

Similar Questions

• Satellite A300-20 q are not on the tech support page

  Satellite A300-20 q are not on the tech support page. I can see 20 p, 20R, but not 20 q. Even a model automatic detector cannot find it in a database. Correct this error.

  Hello

  I don't know which pages or the database, you are meaning, but the Satellite A300-20 q is not available in all countries!

  This model was released for the Russia market.

  Other models of Sat A300-xxx are avaialbel on the other countries of South-East European/medium.

  Welcome them

• Drivers for Satellite C55-A-1RG are not available for download

  All the links of
  http://www.Toshiba.com.ro/innovation/JSP/supportMyProduct.do?LNG=27&service=se
  for drivers for this model are not available.

  They all give 404 error trying to download.

  No idea where you can get these drivers as it is the laptop is a bit useless without at least some video drivers and wireless.

  Hello

  It seems that the driver could be downloaded again.
  I could download drivers for Satellite series C55 - A.
  I guess there was a temporal server problem that seems to be resolved now.

• Satellite L20-181: the WLan switch is not available - cannot activate the Wlan antenna

  I have a Toshiba Satellite L20-181 and I bought an Intel Mini PCI Wifi Pro/Wireless 2200BG so that I place it in the empty Mini PCI connector it has in order to have the wireless.

  While I placed it on a regular basis also antennas etc the Intel utility sends me a message that the network connection is disabled and that I should use the switch on the front panel of the laptop to turn it on.

  This switch located in the laptop from the front is a button that is not reinforced.

  Any ideas guys?

  Hello

  You may need to press the button?
  Also, I found a Satellite L20 manual on the Toshiba site and there I found information that the WLan functionality is not available on all models.

• Network accounts are not available

  Hello

  I work in a corporate environment that is mainly based on Windows, but also have a handful of Macs and a Mac server. The question I have is that the MacBook display the prompt "network accounts are not available" when connecting. This message disappears when the VLAN from requiring authentication on our firewall device, MACs are to be excluded.

  I thought my our support company firewall that Macs are a kind of test at startup. If they do not have full access to internet NETWORK card wireless goes into a State of semi functioning. It is only when they have access to the internet it goes into a fully operational.

  It makes sense when the "network accounts are unavailable" message, I can't SSH in the Mac, but can't ping the IP addresses of our DC, ping any name FULL domain or ping any device outside the VIRTUAL LAN. Does exactly the same as this -after-reboot-no-route-to-host http://apple.stackexchange.com/questions/231290/mac-unable-to-login-network-user

  Our company firewall just remember exactly what service performs this function on the Mac. Anyone know what it's called?

  Kind regards

  Peter

  Any help here...

  http://osxdaily.com/2007/01/22/what-happens-in-the-Mac-OS-x-boot-process/

  During his execution, rc.boot and the other rc source of scripts /etc/rc.common , a shellscript that contains utility functions, such as CheckForNetwork() (check if the network is in place), GetPID() , purgedir() (Directory deletes the content only, not the structure), etc.

  • rc.bootfigures on the startup type (Multi-User, Safe, CD-ROM, network etc.). In the case of a network boot (the sysctl variable kern.netboot has the value 1 in this case), it works /etc/rc.netboot with a start argument.

  /etc/rc.netbootmanages all aspects of the network boot. For example, it runs the network and (as applicable) supports the. It also calls /usr/bin/nbst to associate a file of the shadow in the image of disk used as a root device. The idea is to redirect the entries in the file of the shadow, which hopefully is local storage.

  • rc.bootnumbers if a file system consistency check is necessary. Boots single user and CD-ROM does not run fsck. SafeBoot is still running fsck. rc.bootmanages fsck and return status.
  • If rc.boot has finished successfully./etc/rc

  http://Hayne.NET/MacDev/notes/boot_sequence.html

• OfficeJet Pro 8210: network capabilities are not available.

  Hi, I have been setting up the printer above but I need to put in place on a network. I don't have the network option as it says "network capabilities are not available. When I print the network configuration page, it says network capacities have been disabled when the device has been implemented. I did not disable anything. The user manual says to use the display and move to restore the configuration - tools. I don't have an option to restore the screen of the printer. Please can you help me to reset the printer to factory settings. I'm a COMPUTER tech so don't know what I'm doing.

  Kind regards

  CMS

  Hi @CMS61,

  Welcome to the HP Forums! It is a wonderful location to converse with the community, get help and find resolutions. I understand that you don't have the network option on your printer as it says "network capabilities are not available. I'll be happy to help you in this regard. Great job, looking for user manual for the printer. It's always a privilege to work with a COMPUTER technician like you.

  However, to answer your question about resetting the default printer, it is possible by accessing the menu before display.

  • Turn your printer off.
  • Wait 10 seconds before you turn it back on again.
  • Just as the printer is turned on, press the back (arrow) button on the front panel of the printer "4 times."
  • If you do it right, the support menu should appear.

  Menu Access resets

  There are several options in the Help menu. To access the menu resets all what you need to do is navigate to the right until you find the menu "resets". Under Reset menu, you will find the three different types of resets, reset partial, semi full reset and reset complete. Select the appropriate type of reset you need, and your printer should reset itself.

  The partial reset

  Delivery to zero partial just updates the printer and erases the memory of the printer useless. This type of reset fixes minor printing problems like slow printing cartridge errors, etc...

  The semi-complete reset

  The semi Full Reset is the most useful type of reset. However, this clears all the custom of your printer settings and returns it to its default factory settings. Use this reset if the partial reset does not solve the problem.

  Please do not perform a full reset.

  It will be useful to visit these links.

  Link to perform a reset:

  http://support.HP.com/emea_middle_east-en/product/HP-OfficeJet-Pro-8210-Printer-series/7902063/model/7902064/document/c05225613/

  Link to troubleshooting of the printer:

  http://support.HP.com/za-en/product/HP-OfficeJet-Pro-8210-Printer-series/7902063/troubleshooting

  Thanks for reaching out. Please let me know if this helps in Mark this message as 'Accept as Solution'. If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts help, click on the "Thumbs Up" button to give me a Kudos.

• OfficeJet Pro 8600 Plus: network capability are not available

  Dear Sirs,

  The Officejet Pro 8600 Plus has already been set for a wireless connection. It was primarily used with the USB port.

  We've tried lately set up the wireless connection, and we couldn't.

  We received the message: network capabilities are not available.

  We could not move forward.

  We tried the factory reset, buit didn't work.

  I appreciate your help to resolve this isse.

  Concerning

  Ibrahim

  Please come back to me @Shahin_ij. I think the printer reset will solve the problem. I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• In Windows 7, multiple drive letters are not available to map network drives.

  Missing drive letters in Windows 7

  In Windows 7, multiple drive letters are not available to map network drives.  e: by j: are missing.  How can I fix?

  Drive letters are assigned to other devices, probably the USB card readers.

  You can change the assignment of drive letters in disk management if you want.

• Satellite A300 - easy (key) does not not after SP2 update

  Satellite A300 easy (key) does not...
  I have recently upgraded my Vista SP1 to SP2 (do not know if this is the problem, but I'm pretty sure that's not)

  Yesterday, I discovered that my easy keys no longer work. Lights are out, when I press the keys, the light comes on and goes off again as they do normally, but no reaction on my screen (can not turn on any light without restarting my computer and select turned ON manually cannot transform media of windows opened by the touch and play the key do not work).

  Is it supposed to be a driver or something for this?

  Sorry for the bad English...

  Hello!

  A few days ago, I had the same problem on my laptop Qosmio. Lighting keys stopped working after installing some updates and the 3rd application programs the keys no longer works and also the lighting.
  At the end of the story, I had to reinstall Windows :(

  In any case, now, you should try to reinstall the Toshiba value added Package. He controls these buttons that you want to say and you can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before installing you need to remove the old version first, restart the computer, clean up your Windows with CCleaner for example, restart again and then install the new VAP.

  Good bye

• Some features of Windows are not available.

  I have an IdeaPad p580 and I noticed that a few basic functionality of windows are not available. I use Windows 7 Home premium SP1 and everything else is usually straight out of the box. I guess these are the basic features of windows because I learn about them in an intro to the class of Windows operating system.

  When I try to use secpol.msc in the start menu, windows cannot find it, and also when I try to encrypt a file or a file this option is grayed out. I think Veriface is the encrypt function creep, or another software that is preinstalled is to play with things.

  No idea as to what could be the cause? Is my book misleading me, I may get to such a different way?

  Hi Kholt,

  Some features are not available in Windows 7 Home premium...

  http://www.SevenForums.com/network-sharing/202099-secpol-MSC-network-security-workaround.html

  http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file

  http://en.Wikipedia.org/wiki/BitLocker_Drive_Encryption

  Zehn

• Mobile data does not and the name of the Access Point settings are not available

  I don't have a mobile data, not even the small up and down arrows or letters beside the sims signal bars appear.

  I tried all the troubleshooting settings and different type of network, the airplane mode is off, mobile data are no limit, no power save modes are on. Phone is dual sim so I tried on the two sims and tried to disable the other sim and changing the sim slots, both sims are loaded with a credit of data that works in other android devices. WiFi works fine. Factory reset does not help.

  There is that one thing that I can't not try troubleshooting. When I select settings > more > mobile networks > access point names, it says

  "Access Point name settings are not available for this user.

  Maybe if I could put APN I could get mobile data. How can I do or how I can try to get mobile data to work?

  Phone's Xperia M4 Aqua E2363 with build 26.1.B.2.102 thanks if you can help

  This text is a bit misleading, which is something that I have forwarded internally as your comments.

  If you have no NPP stored the phone displays the text "the name of the Access Point settings are not available for this user" even if you use the owner account and have access to the settings.

  Try to download the automatic settings from settings-> more-> Internet settings and see if that helps.

• iDRAC error on PowerEdge R720 (SWC0700: iDRAC is not ready.) The configuration values are not available.

  My PowerEdge R720 started with iDRAC Initialization Error as topic above.

  SWC0700: iDRAC is not ready. The configuration values are not available.

  Noise of FAN after pressing F1 to continue. Please what can I do? It's my edge transport server and it is now off to find out what needs to be done. Please notify.

  Been,

  Network administrator,

  ExecuJet Aviation Nigeria.

  Hello, I'll email you to ask for the serial number. Thanks Marco

• I get an error, "Microsoft Hosted network is not available" when I try to connect wifi for my HTC desire V through the laptop.

  I use dell xps 15 laptop in which I use Wired internet.
  I want to use my computer laptop wi - fi as a hotspot to use internet on my HTC Desire V for this I'm using connectify software but when I start HotSpot Wi - FI Access Point Encrypted (WPA2) method of sharing is for me the hosted Microsoft network is not available.

  Original title: Microsoft Hosted network is not available

  I had the same problem and that's what I did on my PC Win7:

  (Forgive me if my English is not good)

  1. verification of my network hosted in my driver. I have run the administrator command prompt and type netsh wlan start hostednetwork

  If you get this message:

  The hosted network could not be started. The group or resource is not in the correct state to perform the requested operation.

  
  

  Then you have the same problem with me. It is the next step.

  2. check my driver. Type of command line: netsh wlan show pilot

  Then I saw that my support pilot hosted network. If your driver does not support hosted network, I suggest update you your driver or reinstall it.

  How FND out your driver and update: Start - Control Panel - system and safety - device (under System) Manager - ECS

  
  

  3. If your drivers support hosted network but still will not start, then the problem could be that you do not have Microsoft Virtual WiFi Miniport Adapter (the same problem happened to me). You can search and download. I tried and installed the new card.

  Now I have Microsoft Virtual WiFi Miniport Adapter under network cards, in Device Manager.

  4. I tried step 1 and it worked! So I can run my Connectify and this error message never showed even once.

  I hope this works for you also.

  Good luck

• I use a computer laptop xps 15 in which I want to use my computer laptop wi - fi as a bt hotspot it gives me error that Microsoft hosted network is not available

  Dell xps 15 laptop with windows 7 Home premium 64-bit
  processor Intel core i5 2.30 GHz

  Hello tejashande,

  Thank you for the question!

  It is disheartening to know that have problems you with the computer laptop wi - fi. As I understand it, you get an error that Microsoft hosted network is not available when you use the computer laptop wi - fi as a hotspot.

  I need to ask you some questions to help you best.

  1. What is the exact error message related to networks hosted?

  2. is it works much earlier?

  Download and install the Wireless driver from the link below and check.

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/3854.XPS-15-l521x-Windows-7-driver-cab.aspx

  Answer to us if you are having problems with a Wi - fi connection or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Microsoft Hosted network is not available (CF00100E)

  Whenever I try to start a network hosted, I get an error message like "Microsoft Hosted network is not available". Any problem with my network card. I am currently working on Windows 8 operating system. Is it possible to solve?

  Hi Rithu,

  Try these steps and check:

  a. press the Windows key + R , type Devmgmt.msc to open Device Manager.

  b. click view and press on ' see the hidden devices.

  c. go down the list of devices and expand the "network devices".

  d. find an adapter with the name "Microsoft Hosted virtual network card" and then right-click on it.

  e. Select activate

  f. This will allow the AdHoc created the connection, it must appear in the network connections in the network and sharing Center, if the connection to the ad hoc network does not appear then open the elevated command prompt and apply this command "netsh wlan stop hostednetwork" without the quotes.

  g. after that, the connection should be displayed.