Satellite A300-Y00 - how to use a joystick for games?

Similar Questions

• Satellite A300-1J1 - how to use HARD drive recovery files to install Vista again

  I've read the threads that already exist, until anyone there sprang key of course, however I don't see the answers to my questions, so I hope someone can help.

  Basically my A300 has been regularly overheating and turning off, and after a recent instance of this, I left it disassembled and cleaned the radiator and the surround carefully.

  Unfortunately, reassembly, it became clear that Windows would not start, probably due to some problem caused by the most recent power cut or maybe even within my very careful disassembly?

  In any case, Vista does not start, in all modes, either standard, in safe mode or in repair mode. As standard, it screens with a message of error UNMOUNTABLE_BOOT_VOLUME blue etc.

  Mode of repair, windows bar logo and green rises, but then it just black screens and no more. Slight variation only I had here, it's that sometimes a white cursor rises, but still a black screen. I left the machine 30 minutes where there was a simple delay, but not... nothing happens, it just hangs.

  I have no CD of restoration, because I did not create one, but I was able to access all the files via the platform of Knoppix, and everything seems in order, so important HARD drive corruption seems unlikely.

  I see records to get Toshiba HDD and also Windows RE, so my question to you people is as follows; Is it possible that I can use these files that are still in tact to get Vista without buying a disc for £ 30 from Toshiba?

  My concern is, I don't see why the supposed recovery integrated does not work given that the associated files still seem present and intact on the disk, and I'm reluctant to lose 30 pounds on something, if it is not guaranteed to work in all cases.

  What would you recommend I do?
  My files are backed up and whatever is left is not important... I just want to restore my Vista more quickly, more simple, the cheapest possible.

  Hey,.

  Unfortunately I think that there is nothing you can do because the files are unnecessary if disk HARD recovery doesn't work because you must be able to access the Windows Advanced Boot menu.

  I agree with you, it's not good recovery disc HARD Toshiba doesn't work for you, but you must also understand s your fault if you didn't create the recovery disk as mentioned in the user manual. ;)

  So either buy you a new recovery disk or you are using a Microsoft Windows disk to reinstall Windows. All drivers and tools that you can download on the page of Toshiba.

• Can I send by Satellite A300-y00 for the recovery procedure

  I had the problem in my Satellite A300-y00, which are viruses, trojan or more than threats.
  I would like to ask if it is possible to refer to Toshiba to reformat with a new new?
  I mean will they install the same software with everything as a new included in order to remove all the threats.

  It will cost more?

  Hello

  As I m not wrong not the A300 was equipped with HARD drive recovery option.
  This means that you can grab the laptop and set it to factory settings very easy and without use of the Recovery DVD!

  Then turn on the laptop, press the F8 key and choose the option called fix my computer.
  Then, a new screen should appear and you need to choose the last option called Toshiba Recovery or something like that.
  Then follow the instructions on the screen.

  The whole HARD drive must be formatted and new operating system with all the drivers must be installed

• Satellite A300/Y00 - connect to the Plasma TV?

  Is it possible that my satellite A300/Y00 to connect to my plasma 50 inches, if so, what cable should I buy?

  THX

  Hey Buddy,

  Why it would not be possible?

  Satellite A300 and all Plasma/LCD TVs are generally equipped with HDMI port. So just buy a HDMI to connect your laptop and TV cable.
  HDMI cable transfers audio and video signals so only one cable is needed.

  Lastly but not the least of using FN + F5 secret key you can switch between monitors. :)

• Need drivers Vista for Satellite A300-Y00

  Does anyone know list of driver Toshiba Satellite A300-y00? How I check it?

  I want to download Vista ultimate, but I don't know which driver was installed in a300/y00...

  Help would be appreciated

  Thank you

  Hello

  It seems that Satellite A300-y00 is an Australian series for Toshiba laptop.
  I put t know what series it is, but you can check at the bottom of the unit.
  There must be a model number; something with the PA.

  Check this box and choose this model of laptop on the Australian driver Toshiba page.
  There are some Vista drivers.
  [Toshiba driver Australian Center download | http://www.isd.toshiba.com.au/71/live.dll/topic/content/driver_search.jsp?]

  Welcome them

• Satellite A300-y00 come with s-video output port?

  Satellite a300/y00 come with s-video output port?
  Where can buy the cable to this port, or I can buy anywhere or buy from toshiba dealer?

  Hello

  This seems to be an Australian series for Toshiba laptop so it was designed for the Australian market. I'm not very well if this series of portable supports the m s-video output port.
  The point is that there are different models A300 and the s-video output port has not been installed in all mobile phones of the A300.
  I found a manual and it says that the s-video, put it port depends on the model you have purchased.

  Usually, it should be placed on the left side between the vents and the output HDMI port. Check it out.
  If there is no s-video output port then the laptop does not support it.

  Good bye

• Satellite A300-Y00 black screen but the fan from

  I bought a TOSHIBA satellite A300/Y00 in June 2008 – 16 months. Model number PSAGOA-02Y. After ten months he did not start suddenly. It sounds like the processor and the fan starts but the screen and the led underneath the screen was all black. I tried to connect it to an external monitor, but the screen was too black. I gave her to Toshiba for 2 weeks (!) who said it was the motherboard. They replaced for free that it was still under warranty.

  A few weeks ago the same thing happened again. I turned off it and for some reason at random, he started as usual a few hours later. I called Toshiba to say that, in my view, that computer will crash soon again. They said that they will be able to take it in for service, but if they could not find anything wrong with it that they would charge me $ x. I don't give him service. I even went to a local Toshiba support guy who said that he couldn't find anything wrong with my computer and that there nothing that could do.

  Now the same thing is happening again. This time I can't do it again. Of course their fantastic 3 months for the last motherboard warranty has expired. I tried to take out the battery and start it only to the power, but it does not help.

  I don't want to pay $500 for a new motherboard, and then drop it again. It is obvious that it is a hardware problem and I think that Toshiba should replace my computer free of charge.

  Anyone with similar problems? Any advice? Get pretty annoyed...

  Hello!

  Have you ever contacted again authorized service provider? If this is not the case, do please! You should talk about it again with technicians and then you will see what they can do for you.

  I can understand that it is irritated, but these things can happen and I think that the ASP will be best for you help you. To be honest, I have good experience with my ASP. The repair goes very fast and the technicians are very friendly and knowledgeable. It of always nice to talk a bit with them.

  I m not a technician, but maybe they can fix it as a gesture of good will or if you only have to pay the motherboard and not Exchange

  Welcome them

• How to use mobile data for large app download data

  How to use mobile data for large app download data

  How can I set big data

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Any how to use the Cloud for business training

  As in the topic I'm looking for inspiration, examples, how to use the Cloud for his work.

  My organization is a training, coaching and HR solutions company. (If you are interesting in, welcome to [deleted by Moderator])

  I believe that such tools as a Cloud technology could training more effective and more attractive to the user in its form.

  Will be grateful for any suggestion

  Wik

  Hello

  Please see the pricing and membership creative cloud plans | Adobe Creative Cloud

  You can also attach sales to understand plans and benefits.

  Contact us | Adobe

  Hope that helps!

  Kind regards

  Sheena

• just bought SCAN SNAP supplied with disc of Acrobat, but only for PC, I use a MAC, the serial number of the disk, how to use and get for MAC

  just bought SCAN SNAP supplied with disc of Acrobat, but only for PC, I use a MAC, the serial number of the disk, how to use and get for MAC

  Standard Acrobat's window only; Acrobat pro for mac

• How to use as operator for several values

  Hi all
  
  I want to obtain the column values for the column - filed_name which ends by ('X 1', 'X 2' 'X 3' 'X 4' 'X 5' 'X 0' 'XA' 'XB' "XM" "XP" 'X' "CM" "MT") of the variable_info table
  
  
  I tried to use as shown below
  
  SELECT * FROM VARIABLE_INFO WHERE FieldName like (' %x 1 "," %X 0 ");
  
  but getting error
  ORA-00907: lack of right parenthesis
  
  can someone tell me how to use as operator for multiple values?
  
  Thank you/kumar

  You need not a subquery, just make sure that you use parentheses to group your GOLD requirements

  SELECT RELATION ,
  FIELD_NAME ,
  ATTRIBUTE ,
  FIELD_DESCRIPTION,
  SOURCE
  FROM VARIABLE_INFO
  WHERE RELATION NOT IN ( 'CHAI',  'ITAB', 'ITB2', 'ITB3', 'MINI', 'NOTE', 'MINC', 'FINI', 'FTIM', 'FWTG', 'FMLY', 'FMIS', 'FSUM', 'MEMB' ,'FINC', 'FASO')
  AND (SUBSTR(FIELD_NAME,-2) in ('X1', 'X2' ,'X3', 'X4', 'X5', 'X0', 'XA', 'XB', 'XM' ,'XP' ,'CM','MT')
    OR substr(FIELD_NAME,-1) in ('X')
    OR substr(FIELD_NAME,1) in ('J')
    )
  AND (ATTRIBUTE LIKE 'NUM%' OR ATTRIBUTE = '-') ;
  

  The error you are getting sounds like a problem with the definition of VARIABLE_INFO. It seems the synonym or something that it points to rear edge

  For example:

  CREATE SYNONYM X FOR DUAL;
  CREATE SYNONYM Y FOR X;
  CREATE OR REPLACE SYNONYM X FOR Y;
  SELECT * FROM Y;
  
  SQL Error: ORA-01775: looping chain of synonyms
  

  Kind regards
  Bob

• Re: Satellite A300 cannot start, cannot use the factory recovery

  Hi all, I have a Satellite A300, which gave me problems in the past few weeks...

  I use Windows Vista

  There are about 2 months in the beginning of the laptop problem, it restarts itself automatically before enter in windows (while in the windows loading screen, no blue screen, screen just suddenly darkens and restarts itself), but it will get finally in windows successfully after a few loops

  but about 3 weeks ago, it just keeps looping and never get into windows, good news, it is that it can capture mode safe without problem

  I've done everything I can to try and save, as play with msconfig, drivers, removing the Rams etc, but not luck

  so, I save everything in safe mode and decided to restore the machine factory, but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!

  any idea? or y at - it another way to restore to factory without touching the windows installed in my laptop? is it a hardware problem or software?

  I thought about the creation of recovery disks but my cd drive is not working properly, and I don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...

  Thank you very much!

  >.. .i don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...
  That of right, but you must understand that it is not easy on this virtual path to offer an accurate explanation and diagnosis for your problem.

  It is not easy to tell whether it is hardware or software related issue. best way to test is installation of recovery image. Recovery image is tested and if there are no some portable hardware problem should work fine. How to install the recovery image, which you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  >.. .or is there another way to restore to factory without touching the windows installed in my laptop?
  Something like this is not possible. Windows that you use now needs to be reinstalled. I don't know why you the laptop restarts, but it's also the risk of recovery image installation. In case this recovery image installation will be interrupted, you will have two problems:
  -image of original recovery saved on your HARD drive will be unusable
  -you will not be able to start t

  In your situation the best is to minimize this risk and have original recovery DVD that can be used if something goes wrong.
  > but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!
  Can you please explain what is exactly happening? Is - this laptop is simply cut off / go to the coast and then reboot again or what?

• Re: Satellite A300 PSAGCA: how to install Win XP as 2nd OS

  Hey any reader for the first time and shows for the first time.
  My comp is the Satellite A300 PSAGCA-02U010

  You 2 questions, hopefully someone can help me with.

  The issue of the first: like many people, I hate Vista.
  How can I run XP as a second OS that don't live my warranty?

  2. the volume level is not very strong (sound) when you watch a DVD etc. I tried different settings, and every time I do I have to restart to take effect, which is a pain that vista is slow to restart. I have downloaded the driver, but noticed that it is exactly the same as what is installed already :(

  See you soon

  > How can I use as a second OS XP who don't live my warranty?
  Installing programs or operating system would not avoid the warranty!
  You can install the Win XP as second OS without fear.

  But before install you anything, I would recommend the Toshiba recovery disc creation!

  With regard to the sound:
  As far as I know the parameters which are changes in the player are not not in trouble. You must increase the volume of every time when you start the software again.
  But have you tested different actors? For example, VLC player is a simple and free tools.
  I recommend to test

• Satellite A300-1EC - how to start openSuse Linux from USB HDD?

  Using the desktop PC, USB HDD was installed openSUSE. The computer starts from USB HDD fine. On the laptop installed windows 7. I tied USB HDD for notebook and laptop computer reboot, select by pressing F12 boot USB, but the HARD drive loading specifications internal (WIN 7).

  What I've done wrong? How can I boot from USB HDD?

  Hi aliks-os.

  I m not owner of the Satellite A300, but maybe that it doesn't support boot from USB HDD...
  Connect the HARD drive before you turn on your laptop. Then turn on your notebook and press F12 to access the start menu.

  The USB HDD is listed? Can choose you?