Satellite A300/Y01 - Question on the remote control

Similar Questions

• Satellite P100-PSPA3A-05S00P - how to use the remote control & infrared

  Satellite P100-PSPA3A-05S00P.

  Do not know if I have deleted the drivers or need drivers for remote control and infrared.
  I'm not sure how to activate the infrared but I got this cable look like an infrared receiver, but you don't know where it's going.

  I used the remote when I bought the laptop from 1st but it was a few years ago...

  Hello

  I think that infrared doesn t need to be activated. It s must already be enabled.
  But the remote control can be used within Windows Media Center.
  I think this will work because my friend of mouse remote control with Windows Media Center as well and it worked well.

• Fingerprints and the remote control supported on Satellite P100-387

  P100-387 has a fingerprint and the remote? Please, someone answer me.
  Thank you.

  Hello

  To my knowledge, the Satellite P100-387 does not support the fingerprint reader and is not supplied with the remote control.
  But you're right.
  The fingerprints and the remote control are optional and some laptops in the P100 series support fingerprint reader and are delivered with command remotely.

  I also found this site with P100-387 material specifications:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=120514#0

• Qosmio F20-132: Question on the use of the remote control

  Hi ppl, I just read the manual of my laptop and I realized something that I didn't realize before

  I can use my remote control without using the "infrared adapter" using the USB connection, but it does not work inside the Win XP MCE, but I can use it to turn on my laptop and off and use other features, I will try in the future to use some other aplications with the remote control. I guess many of you guys realized it when you bought your laptop, but I said at the beginning when I opened the package ' what the hell? remote control... but I really need this adapter? Sherazade, that sucks.

  by the way someone is using the remote control with other applications (such as ahead nero, chis tv, or linux inside)?

  Hello

  I downloaded the manual for this unit, and according to the information of the remote control receiver is required if you want to use the MCE Remote control.

  In addition, remote controls USB only works with Win MCE and so cannot be used directly with Qosmio Player
  Additional some application programs can not supported control functions remotely.

• Satellite P750 114 - how to start using the remote control

  Hello

  Does anyone know how to start to use the remote that came with my makeup P750 114.
  When I press on simple volume keys + / doesn't seem to work.
  I have the batteries in it but do not know if I have to activate something on the laptop itself to start using the feature.

  Hello

  A remote control that is included with some models allows you to perofom certain functions.
  Using the remote control, you can
  -Navigate and control the media center window
  -Check the video or live tv display
  -Place the computer in and out of fashion "Eve".

  There is a button on the remote control.
  It begins or ends the OS. The functions of this button as your computer's power button. By default, the "sleep mode" is equivalent to powering down of the State of your laptop. to change this click Start-> Control Panel-> system and security-> power options.
  You will find options; do nothing, sleep, hibernate, shut down.

  Hope this helps

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• Question about infrared remote control on the Qosmio F30

  Help me I am new to this, so sorry if I mess up a bit, I am trying to sort, infrared sensor IF my Qosmio F30, I try to use my media remote
  so if anyone can help thank you
  Ian

  Hi mate,

  where´s so the problem? Just put new batteries in your machine and begin to control your computer with the remote control. Your portable computer with an infrared port that communicates with the remote and usually such device is automatically recognized by windows.

  May I ask what operating system do you use? XP or Vista?

  Welcome them

• Satellite P500-1DZ starts only with remote control

  Hi, I just bought a new laptop Satellite P500 after owning a P200-13Z and P300-160 years without ever having had a problem with one of them.

  I have a problem with the P500-1DZ that I bought because it does not start the power button when he was arrested for a period of time, as for example the night.

  If I stopped and immediately press the power button its fine and it starts as well with the remote control.

  In the BIOS, I noticed that there is an option for remote start to the top of the control that is enabled, but Im a little worried about this deactivation in case I can't restart the laptop... everyone has ideas?

  Also for other users of the P500 who are dissatisfied witht the audio output of the laptop, I fixed that uninstall the Audio drivers Connexant HD, then by restarting which allows Windows to install its own audio drivers... which has greatly improved the audio output of the laptop... even if its not as good as the old P300.

  Thank you

  Hi spidercpfc,

  This question really strange s with this start of the issue and I think that it of difficult to say why it happens exactly, but as written Akuma you should try upgrading the BIOS. You can download it from the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  Last week I updated the BIOS of my P500 also and it worked, I t has not had any problems. I updated the BIOS to the version preinstalled Windows as an administrator. Also, I closed all programs running (AntiVirus, Firewall, browser, etc.) and disconnected from the network. After a few seconds the update was done.

  After the update, you should also load default settings in the BIOS. So press F9 in BIOS setup and save these settings.

  I hope this works. :)

• The remote control comes charged out of the box or it must first charged?

  The remote control comes charged out of the box or it must first charged?

  It is usually quite busy, mine was about 85% when he arrived. It's a question about the pre purchase or you have a problem with your remote control works not.

• Cannot get Windows Media Center to learn the remote control codes decoder

  I'm trying to put in place my TV card in Windows Media Center in Windows 7.  The card is a Hauppauge HVR 2250, which has a blaster/IR receiver.

  The configuration of the set-top box tells me to point the remote at the receiver and "hold" the number 0.  The problem is that the remote control supplied with the set-top box (Motorola RG2400) is not constantly emits the same IR signal when I press and hold the button - signal IR lasts only about a year and a half seconds before turning off. This does not seem to be sufficiently long for Windows Media Center and never detects the signal.

  Can I make it work?

  Hello

  Looks like the remote is faulty I recommend you do replace from the cable/satellite for a replacement/repair provider.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Programming of the remote control

  I am able to program the buttons on the remote without problem but I have more than 60 deployed MD and would like to be able to program them all at once.  Is there a way to the DMM to write an application of advanced task that will program the remote button?

  Thank you

  Al

  Alan,

  
  

  Here's a technical tip I wrote on the programming of the remote control through the

  a HTTP mib.  Just create a task advanced under the task system

  for each color button.  Test & check if it works on a single DMP first and

  then send task for each color button to all of the DMP.  Once it is

  finished make sure you that you SAVE the configuration.

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

  
  

  ******************************

  
  

  You can use DMP MIBs to reconfigure the DMP Remote Buttons. VARIABLES =========   admin           = DMP Web Account Username   default         = DMP Web Account Password   a.b.c.d         = IP Address of DMP   dmm.company.com = FQDN of the Digital Media Manager(DMM) Appliance MIBS ==== ** Use the Following MIB to see the CURRENT Remote Mappings https://admin:[email protected]/* */:7777/get_param?p=*.*&init.pop_enable=false ** Configure Buttons RED https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */Dwww.cisco.com%22 GREEN https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */MD%3Dhttp://www.google.com%22 YELLOW https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */_CMD%3Dhttp://www.yahoo.com%22 BLUE https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */%3Dhttp://www.apple.com%22 ASSIGN A BUTTON TO CAST https://admin:[email protected]/* */:[email protected]/* */[email protected]/* */Dhttp://dmm.company.com:8080/etv-flash-webapp/app/etv_24_.htm%22 ** Use the Following MIB to see the NEW CONFIGURED Remote Mappings https://admin:[email protected]/* */:7777/get_param?p=*.*&init.pop_enable=false ** Save NEW CONFIGURED Remote Mappings on DMP    -> Use the ADVANCED TASK to SAVE the DMP Settings.    -> or Directly on the DMP using the DMP-DM Web Admin    -> or HTTP MIB          ie.          https://admin:[email protected]/* */:7777/set_param?mib.save=1          https://admin:[email protected]/* */:7777/set_param?mib.save=1&mng.reboot=1 

• Ring of the remote control for a updated firmware A77 camera REQUIRED emphasis comments functionality and design?

  Hello
  It is a good complaint and at the same time a good stand on a feature I'd neeeeeed really put in an update of firmware for the camera of the A77 as soon as POSSIBLE (as soon as Possible) like others, I have already asked for what he moooooonths there!
  I have spent the money of the month and time in a machine to control the update in order to focus stacking without touching the camera... It does not give the expected results, but maybe after all, I will succeed.

  But of course, it would look pretty cheap technology around an expensive Sony which does not any Thetering for this device 3 times the price other cameras with this feature, "Thetering", a term which means remote control the camera from a computer or IPod, mobile phone, etc.

  FUNCTIONALITY NECESSARY:

  Everything is necessary at least to do something, would be the ability to reallocate the shutter half pressed the button to advance a specific step. When the focus is narrow, few measures are necessary, but it goes further, steps may be greater. The camera would limit its course to the limits of the focus ring. Once the button out (so not half or completely down) or when the update has reached the limit of development more far, it would be to take a last picture and bring focus back to its position closest to you, ready for the next batch of photo.

  Pictures would be taken when completely down. If the focus is not the position of the closet before splashed the process, we could do it manually or select an option from the menu.

  Another possibility would be to reassing these 2 keys of the remote control features: a to make one step back, one to make a step forward. The advantage of the 2nd button that allows a remote control, would be the possibility of backwards if we went off for a step.

  Overall, it would take very little programming to do this. (mainly add a menu option and the operation of each time button x is pressed, focus moves a step forward, a step being of size proportional to the distance according to a simple formula. Same thing for a button Y in the opposite direction.

  (1) what is the best way to communicate this request to the right people?

  If someone expect this feature too, please comment!

  (2) also, where we communicate comments on design issues?

  Thank you

  Hello Mark,

  Welcome to the community forums of Sony

  Thank you for your comments and feedback for the SLT - A77.  The answer to both questions is, Right Here.

  We are able to pass all your firmware requests and comments and suggestions regarding the product directly to the Digital Imaging Group.

  We can't promise or provide an ETA, however, we listen and as owners of the NEX-7 can attest, we can impliment when we can.

• Using the remote control in parallel and touch screen.

  Hello.

  Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and has been synchronized with the touch screen. Can I use remote control when the touch screen is activated. Now the remote control is locked.

  Thank you to.

  Hello

  N ° when a codec is associated with a touch controller, it is not possible to use the remote control.

  You question No. 677 in link below

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.PDF

  BR Oleksandr

• If script running locally-make, if the remote control-do that

  Hi all

  need some advice on the best way to do it, don't know if it takes even a logic like that, I can be more thinking than he.

  Firstly a bit of background:

  I have a site clipbucket 2.6.  works very well on the remote control.  When I install with xampp on my personal computer errors being lifted from

  Call to undefined method ADODB_mysql::select()

  now, I found a fix for this on their site, it is to change a line in the code:

  need to 'adodb/adodb.inc.php ';

  something that will make reference to the file correctly in a local environment.  Some people suggest

  require ' / FULL PATH TO/adodb/adodb.inc.php ";

  but this does not work for me, I get an error of not being able to find the file, it turns out that this works only on wamp or XAMPP, I use xampp

  This is what works on my test server local xampp:

  need to 'C:\xampp\htdocs\videoz\includes\adodb\adodb.inc.php ';

  NOW MY QUESTION:

  need to 'C:\xampp\htdocs\videoz\includes\adodb\adodb.inc.php ';

  will not work on the remote control to reference the file correctly.

  How can I make a logic to decide if a script is running on local or remote and include a filepath as a result?

  If the file exist?

  the root of the server?

  suggestions?'

  ideas?

  is it still the right way to go on this subject?  I can't find a way for scructure include working with both, I disabled it to use variables in the include statements (regardless of its name), ha

  any suggestions on how to do this effectively and above all safely?

  Thanks a ton for your attention!

  You can do something like this:

  If ($_SERVER ['SERVER_NAME'] == 'mylittlehost') {}

  to do this

  } else {}

  do this

  }

  .. and Yes, to answer your question, it's a good way to go about it.

  Another way is to have an include with a set of functions, etc., which is for your local site and an inclusion of the same name which contains comparable functions for the remote site, but the day may come when you accidentally download your local version of the remote control, causing the remote site to break.

• How to stop the remote control to the setting

  How to stop the remote control to the setting

  Disable the settings > general > accessibility > voiceover.