Satellite A300D-1EI - error blue screen display - drivers did not have

Similar Questions

• Re: My Satellite C660 is connected to my router but did not have access to the internet

  Hello

  I have a Satellite C660 (Windows 7) that I've had for more than a year. I had no problem with the connection to the internet before, but last week I went online and had a small yellow triangle down, at the bottom right of my screen against the bar of connectivity. When I click to connect to my router, it says that it is connected with a signal excellent but says that I have no internet access.

  Can someone please?

  Have you tried to reboot your router?
  Please, do it and check if the problem still persists.

• Satellite L450D-128: how to fix intermittent errors blue screen Crash?

  My computer suffered several errors blue screen for a month, and I need help to fix it. I've already posted this question on the forums of Windows 7, but received no reply and therefore no help.

  I use a Satellite L450D-128. I installed Windows 7 Home Premium 64-bit.
  According to the .dmp files, most of the accidents were caused by the ntoskrnl.exe file that is part of the windows OS.

  Can someone tell me the best way to look at/fix this file?

  Hello

  The ntoskrnl.exe seems to be part of the kernel to boot Microsoft.
  In my view this file or this process should not create a BSOD
  Have you checked if the new installation of the OS could solve this problem?

  Given that the BSOD may be linked to serious problems or hardware problem
  Therefore, you should try new fresh OS installation to check if the system is not affected
  Otherwise I recommend that you check the RAM modules (perhaps running a memtest86 +)

  What do you think of this?

• Satellite A300-1 OC - blue screen on all OS

  Hello!

  I have a problem in my laptop Toshiba Satellite A300-1 OC.
  When the computer is often an error blue screen 8.

  All the drivers are installed, the latest version of the BIOS. After trying all the operating systems. XP, Vista, Seven. The error could not. I read on the forums that it could be faulty RAM. Help please, what I would do in this situation. Thanks in advance.

  Hi Rosicky,

  I put t know why you get this BSOD but 8th is not the error code. Maybe you should check this yet what is displayed exactly when you get this.

  If you think that your laptop is overheating you can clean using compressed air stream. This could blow the dust of fans cooling and, therefore, it of necessary to disassemble the laptop. You can get it from every computer store I think.

  Finally, and especially if you assume it s the RAM you can use Memtest86. This tool can test the RAM for bad sectors.
  Check it!

• 116 error blue screen (1557 DELL i7)

  original title: blue screen (1557 DELL i7)

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode:                                              116

  BCP1:                                                   CF644008

  BCP2:                                                   91A3DB86

  BCP3:                                                   00000000

  BCP4:                                                   00000002

  OS version: 6_1_7600

  Service Pack: 0_0

  Product:                                              256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\071110-14508-01.dmp

  C:\Users\BAHMAN\AppData\Local\Temp\WER-30404-0.SysData.XML

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Best Rigard (Bahman Hosseini)

  Hello

  Best chance for a quick solution is to check with the manufacturer of device video and Dell to updated
  driver (or re-install those present).

  Check with Dell technical support, online documentation and drivers and their known forums
  issue.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ----------------------------------------------------------------------------

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - first two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ---------------------------------------------------------------------------

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  Inclusion error code 116 in the resolution of problems is the only coincidence and has no specific
  which means (other than the driver caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Help with error blue screen. BCCode: 116

  Hi, I get the following error message:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1053

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8010AFC4E0
  BCP2: FFFFF8800FC9E7A0
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  You can see here .dmp file:

  https://onedrive.live.com/redir?RESID=ED0BFFB73C652EF7! 126 & authkey =! AFdh-tv9C-zKTsA & ithint = the file % 2cdmp

  Hello

  Error checking 116, {fffffa8010afc4e0, fffff8800fc9e7a0, ffffffffc000009a, 4}

  Probably caused by: nvlddmkm.sys (nvlddmkm + 9a57a0)

  nvlddmkm.sys as of 07/02/2014 Nvidia video drivers.

  fffff880 '0f2f9000 fffff880' 0ff87000 nvlddmkm T (no symbol)
  Loaded symbol image file: nvlddmkm.sys
  Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Image name: nvlddmkm.sys
  Timestamp: Wed Jul 02 10:42:02 2014 (53B4446A)

  1. check with Nvidia Support, their drivers and documentation online and ask in their forums

  on known problems. Update the video driver. If there is no newer, you will need to come back
  for a more stable version.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  2. check with ASUStek support, their drivers and documentation online and ask in their forums

  on known problems. Updated BIOS, drivers of low level chipset and on-board major and
  separate device drivers.

  BiosVersion = 0205
  BiosReleaseDate = 01/08/2011
  SystemManufacturer = ASUSTeK Computer Inc..
  SystemProductName = CG8565
  Family = Desktop
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = CG8565
  BaseBoardVersion = Rev 1. XX

  ASUS - Service<-- includes="" live="">
  http://www.service.ASUS.com/

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  3 use ALL other methods in the troubleshooters below and in the next message.

  =============================================================

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug Check 0 x 116: VIDEO_TDR_ERROR
  

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to reset display driver and recover a timeout failed.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  VIDEO_TDR_ERROR settings

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The pointer to the context internal TDR recovery, if they are available.
  2	A pointer to the loaded device driver module (for example, the owner tag).
  3	The error code of the last operation that failed, if they are available.
  4	Reserved.

  BCCode: 116 0 x 00000116<-- read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Many errors blue screen (DRIVER_POWER_STATE_FAILURE) 0x9f.

  Hi all!

  I get frequent 0x9f blue screen errors. I wonder if someone could kindly have a look to this dmp file?

  http://sdrv.Ms/18BCO18

  Very much appreciated.

  Darryl

  Hello

  The attached file of the DMP is the bugcheck DRIVER_POWER_STATE_FAILURE (9f).

  This error occurs if the drivers do not manage applications of transition from State power properly, usually during one of the following procedures: stop, suspend or exit from sleep, suspend or resume from hibernation mode.

  To your credit, I see 2 possible drivers problem.

  Cannot load the image \SystemRoot\system32\DRIVERS\GEARAspiWDM.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for GEARAspiWDM.sys
  ERROR: Module load completed but symbols can be loaded for GEARAspiWDM.sys
  WARNING: Unable to verify timestamp for nvstor64.sys
  ERROR: Module load completed but symbols can be loaded for nvstor64.sys
  Probably caused by: nvstor64.sys

  GEARAspiWDM.sys also shows in the blocked address of PRI ~.

  GEARAspiWDM.sys = class by Gear Software CD-ROM filter driver. It also comes with iTunes.

  Update here - http://www.gearsoftware.com/support/drivers.php

  nvstor64.sys = nVidia storage (nForce chipset driver).

  Update here - http://www.nvidia.com/Download/index.aspx

  Keep me updated on the behavior of the system after doing the following.

  Kind regards

  Patrick

• Satellite T110 - 10 X - blue screen when creating backup

  I bought this netbook a week ago. First of all, I'm okay with windows 7 (home premium x 64-preinstalle) but in a few days, I loved. Yesterday, when I tried to make an image backup (for the first time) problem began.

  1. in the creation of the back to the top (with a windows image), I received: unable to complete error - blue screen and the netbook does more.
  2nd time same thing.

  Now, there are times when the computer enters answers do not mode there is a strange noise coming from the right of it (I don't know if his came from the speaker or elsewhere) but if his hearing only when the netbook stop responding... and the only solution is to restart (unplug or keep the power button down for 5 seconds)

  before attempting to run this backup thing and receive blue screen dump, that sound never took place!

  The mistake of relief can be fixed or should I reinstal of the new OS? * the netbook came with Windows 7 preinstalled
  This sound is heard when it stops responding is normal? or do I have to pick up the netbook?

  Best regards

  Hello

  I recommend you to reinstall Windows from image to hard drive then do a recovery disk.

• Chromebook 11 - error blue screen bsod system 895 32. exe how can I get rid of this? screen cannot be deleted.

  Chromebook 11 - error blue screen bsod system 895 32. exe how can I get rid of this? screen cannot be deleted.

  [Moved from Virus & Malware]

  In case you see something similar...

  

  (photo source: https://malwaretips.com/blogs/remove-debug-malware-error-895-system-32-exe-failure-popup/ )

  ... you can normally just use the Task Manager to exit your browser (' end task'), and the pop-up should be gone. Please visit: http://answers.microsoft.com/en-us/protect/forum/protect_other-protect_scanning/potential-malware-blue-screen-with-dialog-box-on/3569bb1b-c05e-4247-98dc-6bf22da581e0

• NMI:Parity error blue screen

  I have problem with blue screen with any program at any time. It is as it should be a hardware problem. When I run the Diagnostics on my computer everything seems to check out OK.

  Hello drichardson3,

  ·         You get this error blue screen randomly on your computer?

  ·         What exactly is the diagnostic test that you have run on the computer?

  The checking of NMI Parity error is an error related to a defective hardware on your computer. This is mainly caused by a faulty RAM.

  To resolve this problem, you may need to check on the RAM, I suggest you contact the manufacturer of your computer to check the hardware that does not work properly.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver_irql_not_less_or_equal blue screen Vista and can not restart

  My PC Win Vista (not sure if 32 bit or 64) continues to display blue screen. Today, he continues to display blue screen when starting, and I can not even accept F8.

  Here's what it shows the blue screen before. Hope you could give me some advice what I can do next. Thank you!
  
  A problem has been detected and windows has been shut down to prevent

  damage to your computer.

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you have seen this Stop error screen, restart

  your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.

  If this is a new installation, ask your hardware manufacturer or software

  the windows updates, you might need.

  If problems continue, disable or remove any newly installed or

  software. Disable the BIOS memory options such as implementing caching or shading.

  If you need to use Safe Mode to remove or disable components, restart your

  computer, press F8 to select advanced startup options, and then select

  Safe mode.

  Technical information:

  STOP: 0X000000D1 (0X00000000, 0X00000002, 0X00000000, 0X855F7395)

  nvstor.sys - address 855F7395 base at 855F3000, DataStamp

  46671a 61

  Hello

  nvstor.sys is a Nvidia video driver.

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of problems and when you get to the section driver view
  for generic methods in the next message and then back to the if necessary troubleshooting tool.

  Look in the Event Viewer to see if something is reported on.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  My troubleshootter of bluescreen generic, when you get to the section driver go to the next message, then
  return to this one.

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------------------
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  ------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• my computer told me to repair windows.and everytime I try I get a blue screen. It does not start in any mode without failure. I just get a blue screen. Thany you shane

  whenever I try to start my computer .a blue screen come often does not start in any of the modes security .He told me to repair windows recommended. can't do recovery or what he can be.wont start in safety mode.what can I do .thank you. Leonard.

  Hi leonardhurley,

  Since when are you facing this problem?

  You did changes before this problem occurs?

  What is the exact blue screen error message you received?

  Method 1

  I suggest that you perform the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: disable automatic reboot in order to collect the Blue error screen, so in case the blue screen just flashes and dries on.

  Method 3:

  I suggest you to follow the article below for the Blue error screen.

  http://support.Microsoft.com/kb/958233/en-us

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.