Satellite A300D - cannot start webcam after reinstallation

Hi guys,.

I just reinstalled Windows with a Windows Vista disc, not an a Toshiba.
My camera seems to work very well, but I can't find the file to open it. Can you show me how?

Thank you

Hello

The webcam software should be included in all programs-> Camera Assistant Software
There you should find an exe that starts the application.

Welcome them

Tags: Toshiba

Similar Questions

  • Satellite L50 - cannot start webcam

    Hello!

    I have a Satellite L50 and I can't open my camera.
    It is said "to begin with, connect a camera"

    someone knpws where I can find the drivers or what to do with this?

    Thank you!!

    In order to use the webcam, you must use the application of webcam Win 8.1.
    But you should also check the privacy of access webcam settings.

    You'll find this under settings PC-> St-> webcam

    Please see also the useful Microsoft page on the webcam to Win 8.1 internal
    http://Windows.Microsoft.com/en-us/Windows-8/camera-app-FAQ

  • Satellite A300: cannot start: blocked by Phoenix TrustedCore Setup Utility

    {SUMMARY: "Phoenix TrustedCore Setup Utility" appears every time you start, requesting a non-existent password.} How to get rid of this request? }

    This one is a little weird. We have a Tosh Satellite A300-193 mobile (Code manufacturer: PSAJ1E-01000XEN) purchased from July 2008 (via Getech educational scheme). We have (had) Kaspersky Anti-virus on this subject, but since his license has expired (and they didn't really like it), I was going to remove and install Avast.

    Kasperky removal instructions involve have their tool "kavremove" who say their instructions must be run in safe mode. So, after downloading the tool, I pressed F8 to boot into safe mode...

    ... And that's where things went wrong. Instead of typical black screen startup options screen, I got a splash screen at the level type, with a request for password of "Phoenix TrustedCore Setup Utility. We have never set a password on this computer, and I've never seen this particular screen before. After three bad guess (of course they're wrong!, and it does not matter if I leave the field blank), the unit turns off.

    Now when I turn it on, it just goes right to the request for password of Phoenix: I hit F2, F12, F8 or whatever it is. I can't establish why it should do, or how I can possibly bypass it. None of my password guess work (of course).

    I googled for hours (literally), closes the thing, I could find were instructions in [a post on the forum USA | http://forums.toshiba.com/t5/Windows-Vista-Windows-XP/Satellite-A205-Cannot-Access-BIOS/m-p/123075#M7749]. It was a partial solution: we can start the machine with this procedure (phew!).

    Unfortunately, it is not a permanent solution. After EACH stop, at the next start-up presents impossible demand "password." So it comes to pull the battery (again), to the phase of "discharging", battery, turn on and - it boots. Or at least, he has every time so far.

    This is going to be extremely painful. Any tips or to tackle the problem of pointers, which would be welcome. I will never see this request for password "Setup Utility".

    Thank you!
    David
    Edinburgh, UK

    Hello

    I think the password loss is the BIOS password.
    I m wondering why this password is displayed when starting if you have not set it

    However, the point is that the BIOS password can be removed if you n t know this password.
    Unknown BIOS password can be removed by a Toshiba authorized service partner.

  • Cannot start windows after update

    After you install a windows update, my computer cannot start windows, when I boot it.  It seems the windows files.  I don't have a recovery disk (lesson).  I have windows vista, is there anyway to restore windows on my PC other than buying the software.  I confess that I do not download updates often... that is why... It's always trouble.

    Hi, MooreTM,

    Brand and model of your computer, please.  Thank you.

    (1) you are able to start safe mode and do a system restore?

    Start the computer

    Start typing F8

    Select Mode safe mode with networking

    What a load Safe Mode, start > all programs > Accessories > system tools > SafeMode

    Select a date and time before the Windows update that caused the problem

    (2) start Windows and tapping F11 key

    If the Advanced Options screen, select fix my computer

    Press enter

    I suggest the site of the manufacturer of the computer and purchase a reinstallation DVD software.  Cost is minimal ($16.-$20.)

  • Re: Satellite A210 - cannot start and how can I backup my data?

    Hi, after installing some software of spyware on my vista A210 (spysweeper) I rebooted my laptop, restart it went straight to the Boot Manager and load insert me my recovery disc and follow the instructions in an effective way. The only options I have with this disc to format my hard drive, it seems to indicate that it will erase everything (that would include things on my partitioned drive?).

    No there is no way to start the PC in safe mode? I tried using the F8 key, but couldn't get the SafeMode menu by using the recovery disk to start my machine. So when I chose to start windows in safe mode it loaded the disc in place.

    This sounds like a familiar problem, if so someone knows how can I restore the last parameters of weeks without access to windows?

    I'll have to swallow and format my drive, on the partition that I have a few photos, etc. that I've not saved yet a trip last week so I want to only do this as a last resort?

    Would I be able to go buy a copy of vista and fix it using the CD? My laptop came with windows vista installed but no windows disk.

    Any help is very appreciated!

    Thank you.

    If you are not able to go into the F8 advanced boot menu, you cannot start in safe mode. It's done.
    I think the only way is to reinstall Vista.

    The reason why the laptop came without installation disk is the disk HARD on the second partition a folder called "HDDRecovery". This folder contains the factory settings and you can restore it if you go to the menu of advanced, boot repair my computer and then you can select the Toshiba Recovery feature.
    In addition, you always get a reminder message that you must burn this image to a DVD:
    + Important INFORMATION +.

    + your system is equipped with a hard drive recovery system. If you need repair.
    + your computer in the restaurant to original factory State, you can do it directly.
    + HDD (press F8 when you start your computer, choose "Repair your computer" +)
    + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

    + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
    + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
    + Gets severely damaged.

    However, now it is too late to burn the recovery disc.
    In your case, I would order a Toshiba Recovery disk directly. Then, you can reinstall the laptop and the Toshiba drive already contains all the drivers and tools.
    Here you can order: [https://backupmedia.toshiba.eu/landing.aspx]

    If you use the recovery disk Toshiba that the whole HARD disk will be formatted. You should back up your data before doing this.
    To do this, you can buy an external HARD drive enclosure. Remove the HARD drive from the laptop, put it in the case and plug it into another PC or laptop. Then, you are able to save your data.

    I hope I could help you.

  • Satellite L100 113 starts slowly after upgrade memory

    Hello

    Toshiba Satellite L100 113 PSLA3E-02401JRU starts slowly after upgrade memory with Kingston KTT533D2-512 (512 MB) of memory.
    When I press the 'power' button, it flashes, starts the fans and HARD drive several times. Then it shows BIOS start messages by memory full 768 MB and starts Windows XP without a problem.
    This behavior is noticed only after "shut down."
    It does not happen with "restart".
    What can I do to eliminate this long "attempts" to start my laptop computer?

    Thank you
    Novomir Kovalenko

    Hello

    This problem appears before upgrade memory?
    Have you used exactly the same memory modules?
    If this isn't the case, then perhaps there are a few compatibility issues.

    Usually, after the insertion of the modules you must enter the BIOS and then save the settings. Please it and eventually the laptop will start without any problems.

  • Satellite L40 - cannot start Windows

    Hello

    hope you can help, my computer Toshibal L40 laptop on commissioning began by displaying the following error message:

    * "Cannot start Windows. a recent change in the software hardware might be causing... » *

    It offers the possibility of:
    "* Launch Startup Repair option" * "

    I chose this. WIndows seems to load up, but then I get the following error message:

    Installed program cannot start. Click OK to turn off the computer *.

    I lost the recovery disk, but attempted to load the recovery console by using a windows XP disk, but it gave me error message more. Advice would be very welcome.

    For the installation of Vista you don't need SATA driver but for Windows XP Home edition you need. Is no problem at all.

    The question is what you want to do now? If you want to use Vista just use recovery media and you will have factory again.
    No problem at all.

  • Satellite C55 - C - 1 M 0 - cannot start Windows after the installation of the Dual Boot

    After I installed Ubuntu, when I try to start Windows, the process stops and says that there is a mistake: NTFS_FILE_SYSTEM. But I can't run Ubuntu without problem.

    Is there any special step before installing a Dual Boot with Ubuntu system?

    My laptop is a Satellite C55 - C - 1 M 0.

    Thank you. Kind regards.

    I guess the problem is due to changes in the size of the partition. I found a few questions about google with a ubuntu - NTFS_FILE_SYSTEM query. Maybe you should take a look https://www.google.fr/search?q=ubunt...sm=93&ie=UTF-8

  • Cannot start Webcam on Satellite A200 - 1 M 5

    Hi everyone, hope you can help me!

    I can't start my Webcam on my laptop... I don't know what the problem is exactly

    I downloaded the driver from here

    But it still does not work... Even if I open the Msn Messenger, the Webcam button shows up

    & This is my model of laptop: Toshiba Satellite A200 - 1 M 5 PSAE0E

    Wish you can help me

    Ahmed

    Hello

    How have you tried to install it?
    Did you remove the old driver of the webcam?

    I recommend you all first delete the old software, and then restart the laptop.
    Then, you use a freeware tool called CCleaner.
    Run this tool, clean the registry and the system and then install the new software.

    Good luck

  • Satellite A30 cannot start after cleaning the heatsink

    I have a problem with my sat a30. It lights for 5 seconds then goes automatically off and on again for 5 times, before finally shutting down completely. all this began after I cleaned the heatsink. can you give me some advice for what to do with this problem?

    Hello

    This path is not easy to say what is the problem, because, who know what did you exactly and how. As you know do something like that on your own is always risky.

    Are there signs of life of the cooling fan? AFAIK the CPU becomes very hot in just seconds after the start, and I presume that CPU is not cooled properly and because of this unit turns off.

  • Satellite L500-1DT: cannot start webcam - 'initialization failed '.

    Whenever I try to open my webcam it comes up with the message "initialization failed" and no other information.
    Does anyone know how to fix this?

    I'm not completely computer so simple instructions please!

    [Thanks:]

    Hello

    First remove the software from the webcam installed in the system.
    Then, visit the page of European driver of Toshiba and download software webcam for your laptop model.
    Unzip the package, and then reinstall the webcam software.

    Then restart the laptop and try again!

  • Re: Satellite C850 - cannot start windows 8.1

    Hello

    I have reset clean my Toshiba Satellite C850 with USB windows 8.1 but now if I start the laptop on it happens has this code 0 xC0000001.
    I can not start safe mode cannot use advocatus.

    Help, please

    Hello

    Have you installed original recovery image that you created on the USB key?

    Please try to install it again. Usually after installation of the own image of recovery your laptop should boot correctly.

    By the way: have you noticed this problem right after the installation, or later after some updates to install.

    Have you tried to solve it using Windows start-up settings?

  • Satellite A100: Cannot install recovery after having deleted the Ubuntu partition

    Hello friends,

    I have the Satellite A 100. I was using dual OS - windows vista home edition and Ubuntu. Now I wanted to remove Ubuntu and so I did the stupidest thing - directly delete the partition with Ubuntu which had the GRUB files. Then to the laptop computer restart of course the Grub bootloader wasn't there and if the computer is not started or load any OS. Then I thought that I will reinstall Vista with product recovery CD but the progress reached at 2% and then I keep getting error 1117 a failure to read. I tried so many times without success. I even tried to install XP, but it says Intel boot agent cannot make connection. And it also fails.

    Please help to reinstall Vista or XP. I'm really stuck and I learned a lesson not to tinker in mobile when it isn't those of Cup of tea!
    Any help is greatly appreciated.
    Thank you!

    Perkins

    > Now if I download EasyBCD how would I be able to run it or how should I use it?
    You will not be able to run EasyBCD because you are not able to boot Vista.
    EasyBCD can be installed only in Vista and will allow you to change the Vista Boot Manager.

    I think you need to format the entire disk HARD again should erase all partitions and must attempt to reinstall Vista.

    I recommend using a free tool called GParted LiveCD. Google for what it helps format the HARD drive!

  • Re: Satellite A300 cannot start, cannot use the factory recovery

    Hi all, I have a Satellite A300, which gave me problems in the past few weeks...

    I use Windows Vista

    There are about 2 months in the beginning of the laptop problem, it restarts itself automatically before enter in windows (while in the windows loading screen, no blue screen, screen just suddenly darkens and restarts itself), but it will get finally in windows successfully after a few loops

    but about 3 weeks ago, it just keeps looping and never get into windows, good news, it is that it can capture mode safe without problem

    I've done everything I can to try and save, as play with msconfig, drivers, removing the Rams etc, but not luck

    so, I save everything in safe mode and decided to restore the machine factory, but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!

    any idea? or y at - it another way to restore to factory without touching the windows installed in my laptop? is it a hardware problem or software?

    I thought about the creation of recovery disks but my cd drive is not working properly, and I don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...

    Thank you very much!

    >.. .i don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...
    That of right, but you must understand that it is not easy on this virtual path to offer an accurate explanation and diagnosis for your problem.

    It is not easy to tell whether it is hardware or software related issue. best way to test is installation of recovery image. Recovery image is tested and if there are no some portable hardware problem should work fine. How to install the recovery image, which you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

    >.. .or is there another way to restore to factory without touching the windows installed in my laptop?
    Something like this is not possible. Windows that you use now needs to be reinstalled. I don't know why you the laptop restarts, but it's also the risk of recovery image installation. In case this recovery image installation will be interrupted, you will have two problems:
    -image of original recovery saved on your HARD drive will be unusable
    -you will not be able to start t

    In your situation the best is to minimize this risk and have original recovery DVD that can be used if something goes wrong.
    > but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!
    Can you please explain what is exactly happening? Is - this laptop is simply cut off / go to the coast and then reboot again or what?

  • Satellite C650 cannot start Windows

    Hi and thanks for reading this post.

    I had a Satellite C650 laptop with Windows 7 and inside the h2o bios, works fine for about a year now. The problem, as this post came yesterday when I was using the laptop as usual. At one point, it seemed that the computer worked very hard (fan noise, could not click on anything) and it lasted about a minute or two until what I tried Ctrl + Alt + Delete, who don't do anything. 5 minutes later an error window pops up saying that CTRL + Atl + Del could not be run at this time. I could not click on anything whatsoever and a s Malwarebyte (anti-malware software) had opened, although I couldn't read what he says since I couldn't click on anything. I held the power until the computer closed and proceeded to restart.

    A window asking me if I wanted to start windows normally, I said yes, but after the Toshiba usual loading screen, nothing happened (blue screen dark without the usual windows start icon) I left it running for 15 minutes, but still nothing. He retried a couple of times off the computer with the power button (this time is not to ask me if I wanted to run windows normally) and still the same thing.

    For some strange reason, I can not start mode safe mode using f8 because f8 simply do nothing. Tried the f2 boot configuration, but nothing seems to be no relief at the moment.

    Thanks a lot if you can provide some tips on how to solve this problem.

    -Vincent

    Hello

    Pressing F2 should allow you to access the BIOS.
    The F2 key must be pressed immediately after that the laptop has been powered.
    It work? You can access the BIOS?

    If this is not possible, you can pass the hypothesis that this could be a hardware problem.
    In the worst cases that the motherboard may be affected or device connected to the motherboard as RAM.

    Solution? Good RAM could be verified using new modules, but if you have no spare parts available for this test, then I recommend to ask a technician for verification of material.

    Your warranty is valid? If so, don t waste time and get in touch with the service people.

Maybe you are looking for

  • Side button not opening not dock

    The side button on my new Apple Watch 2 does not open the dock, can reset the watch to solve this problem?

  • Where is the

    Where is the button 'Search' on Thunderbird 3? I need to revisit several old emails and can not find them, and there is no search box on my version of Thunderbird.

  • 12 iTunes import to the AAC version

    Hello, I saw that iTunes 12 has no option to import a MP3 to AAC in the context menu. Well, I want to know: how to do that with this new version of iTunes? My iTunes version is 12.4.0.119 Thanks for the help!

  • Bootmgr missing of error for windows 7 Home Basic

    Salvation; I want to restore my laptop to factory setting, because all network drivers are currupted and couldn't fix the laoptop. but I tried to restore to factory setting I'm missing bootmgr error fascing... .i have no any CD bootable... Here are t

  • Problem connecting to SBS 2011 essential

    Although my laptop connects OK and other laptops, my PC refuses to connect. I looked for answers technical and follow-up procedures, but still no joy. PC is running W7 professional. Initially the first attempt failed, and that's where everything went