Satellite A300D - fan turns very hard and the laptop gets very hot
I was wondering if someone could point me in the right direction as what to do with the overheating problem that I currently have with my A300D. I had the laptop for less than a year, it is still under warranty but I don't know where to go or what to do to fix it.
The problem: about two months ago, I noticed the fan turns very hard and also the laptop gets very hot. Now it runs so hot the laptop shuts down completely. The heat being driven out of the laptop is so hot! burn your my infact.
Anyone has any advice they could offer me.
Thank you
James
Hi James
You wrote that you have the laptop less than a year, so my question is this is already cleaned it?
The laptop needs to be cleaned every 3-4 months and I do this every 3 months. Whenever I do I m wondering how much dust out and after this procedure the portable is a lot cooler.
Here's an interesting article from Toshiba on this subject:
http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm
Compressed air spray is really useful and you should check it out yourself! ;)
Tags: Toshiba
Similar Questions
-
Re: Satellite A300D-15B - BIOS update failed and now I get a black screen
I've updated my laptop to run windows 7 instead of vista some time ago and my laptop was running, but the fan seems to stop working and I found that a BIOS update can fix this on this forum. The BIOS update has stopped responding partially through and I had to shut it down. I tried to run again, but he continued to come up with an error message. The laptop was working fine, but once I turned it on the next day I found that it is only responsible to a black screen. My laptop is out of warranty, but I thought I would send it out the hope for a decent price, but she came back with a cost of mounting A £400 for a replacement motherboard and price tag. Anyone know if these types of problems can be repaired without full replacement necessary?
Thanks to advanced to someone who can help :)
Hello
You must contact an authorized in this case service provider. You should speak with the technicians because they try to reflash the ROM module where the BIOS is stored. This isn't expensive and it s worth a try! ;)
You can find a list of the ASP s here:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service providerBut in the worst case you need a new card of mother, but technicians must try to reflash the ROM module first
-
Re: Satellite A300D - 14 p - XP stops in the middle of the installation
Hello!
Why when I install Windows XP on my PC overheated and stops in the middle of the installation?
Why windows XP run so long, on the other PC as windows loads by 3 times faster!
My PC is Satellite A300D - 14 p PSAKE8E
If your laptop gets too hot, did you clean it?
From time to time, you should clean your computer laptop or let's say the cooling fans.
You can use the jet of compressed air that could blow out the dust from the cooling fans. So I clean my laptop if it of necessary.And what do you mean with Windows XP works on another PC 3 times faster?
Maybe the PC has a hardware configuration that is faster than the Satellite.
To improve performance, you can do many things: defragment the HARD disk, remove all unnecessary programs, clean the registry, disable some services, check automatic startup programs in msconfig and so far. -
Satellite A300D - 17G: some strange behaviors of the battery/adapter
Help, please!
My Satellite A300D - 17G stopped abruptly to recharge the battery. AC is plugged in, but it won't charge the battery and indicates "0% remaining. All contacts have been checked several times, without result. Do I have to replace the AC/DC adapter?Hello
Can you turn on the laptop with AC adapter only?
If so, then it means that your adapter is OK.
In this case, I would try new battery. -
Fan works like crazy and the battery drains quickly after the installation of Sierra on MacBook Pro
I installed Sierra and since my MacBook fan runs like crazy and the battery drains very quickly. Right now I use Safari and Mail. He has never done this before. How can I stop this from happening? It is now more than 48 hours since I installed Sierra. All constructive suggestions are welcome.
Try resetting the SMC http://support.apple.com/kb/ht3964
-
Satellite L300-PSLB8E - screen becomes all white and the laptop freezes
Hello
I have a Toshiba Satellite L300 PSLB8E. I initially bought with Windows Vista already installed on it. After a few years, I changed the operating system Windows 7 Ultimate. I installed the display and all the other necessary drivers (that is, sound, network, etc.).
After I installed Windows 7, when I use the laptop for a while, the screen becomes all white and the laptop hangs. This happens spontaneously. Sometimes, in less than 10 minutes and other times that it can work perfectly for hours. I checked for loose batteries and other components, but everything seems fine.
Physical damage only that there is a tiny crack on the screen in the bottom right of the screen. The operating system is not good? If I put windows Vista back as it was?
Please advise and help understand me what the problem is with the laptop.
Until we start discussion can you tell me what you do when this happen?
Hard stop and restart?
Is everything OK again when you do?It is not easy to say what exactly is the problem, but I put t think there is problem with OS and preinstalled display driver. A long time ago I installed Win7 Home Premium on friends L300 and it works perfectly.
What you can try is to use the external monitor for a while and see if everything works well. If so, there is no problem with the operating system, drivers or graphics card. It may be that the display problem.
-
My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before. My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?
original title: internet connection.Hi vonhatten,
- Did you the latest changes on the computer?
- You receive an error message when you try to connect to the internet?
- You have security software installed on the computer?
Refer to the article below and try the steps mentioned, check if it helps.
In Windows network connection issues
-
Re: Satellite Pro P300 - turning itself off on the password box
Can someone help with this problem please?
Sateliite Pro P300 my daughter will not feed, he died as the power on the password box appears on the screen. I can just make out the word continue until everything goes balnk and the laptop computer shuuts down. This happens to all power over.
New machine use.
She has her level geography course to finish for tomorrow!
Really gratefule for any help that anyone can give.
See you soon
Martyn
Hello
What password box do you mean? You hear the Windows password?
Well it s weird to say what causes the error, but try to start in safe mode.
Load default settings in the BIOS during the F9.Make sure that the fan works because maybe he stops while he gets to hot.
Welcome them
-
I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:
Malwarebytes Anti-Malware (Trial) 1.75.0.1300
www.Malwarebytes.orgDatabase version: v2013.04.10.14
Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
Internet Explorer 8.0.6001.18702
Ziadie Berry: BERRY-LAPTOP [Director]Protection: disabled
10/04/2013-17:44:54
MBAM-log-2013-04-10 (17-44-54) .txtScan type: quick scan
Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
Analyze the options disabled: P2P
Objects scanned: 271656
Time elapsed: 43 minute (s), 42 second (s)The process of memory detected: 0
(No malicious items detected)Modules of memory detected: 0
(No malicious items detected)The registry keys detected: 0
(No malicious items detected)The registry values detected: 0
(No malicious items detected)Registry data items detected: 0
(No malicious items detected)Files detected: 0
(No malicious items detected)Files detected: 1
C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.(end)
Malwarebytes Anti-Malware (Trial) 1.75.0.1300
www.Malwarebytes.orgDatabase version: v2013.04.10.14
Windows XP Service Pack 3 x 86 NTFS
Internet Explorer 8.0.6001.18702
Ziadie Berry: BERRY-LAPTOP [Director]Protection: enabled
10/04/2013 23:43:49
MBAM-log-2013-04-10 (23-43-49) .txtScan type: quick scan
Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
Analyze the options disabled: P2P
Objects scanned: 269636
Elapsed time: 49 minute (s), 41 second (s)The process of memory detected: 0
(No malicious items detected)Modules of memory detected: 0
(No malicious items detected)The registry keys detected: 0
(No malicious items detected)The registry values detected: 0
(No malicious items detected)Registry data items detected: 0
(No malicious items detected)Files detected: 0
(No malicious items detected)Files detected: 1
C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.(end)
I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:
Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
WinSock statusattmpting error information to validate the Winsock base providers: 2
error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
user redirection of information in support of the appealDiagnosis of network adapter
Network location detectionInfo to help home Internet connection
Identification of network adapterInfo network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
Info both Ethernet connections and wireless available, ask the user for selection
required user input action: select network connection
Info Wireless connection selected
State of the network adapterInfo network connection status: connected
HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivityWARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
error could not make an HTTP connection.
error could not make an HTTPS connection.
error could not make an FTP connection.
Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.
Hello
Follow these methods.
Method 1.
Start the computer in safe mode with network and run a full scan of computer viruses.
To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Method 2.
If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.
Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software
What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Method 3.
You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.
How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
my computer turns off not and the hibernation...
my computer turns off not and the hibernation...
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
turn it back on.How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlThe above is kind of prerequisites and may solve the problem.
==========================================
A Fixit for Hibernate
How can I enable hibernation on my Windows Vista computer?
http://support.Microsoft.com/default.aspx/KB/929658How to reactivate the lack of Hibernate Option in Windows Vista?
http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/-------------------------------------------
More if necessary:
Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem
and so on.Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htmHow to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686May need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.htmlHow to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlPanel configuration-Device Manager - look at the settings for the WiFi network card power management,
Modem and other devices. (Double click on the device and the power management tab)May need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again
Migration of CS4 breaks the license. That's what 150:30 means. Assuming you are using a Mac.
You can use the Terminal method to repair the license... but I stress that carefully read you and understand the instructions here before you run it. beginning
# 11. https://forums.Adobe.com/thread/1714695
If this isn't what you want to do, you have to reinstall.
Gene
-
my power green LED flashes and the laptop does not start
Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...
My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name
It seems that your device is not post. You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...
-
When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".
Hello
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work
Hello
Thank you for your response.
I appreciate that you have attached a screenshot of the problem.
Have you tried troubleshooting of hardware and devices running?
Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows/back-up-registryI hope this helps.
Thank you
-
Hello
I have a fujitsu lifebook p series windows 7 and every now and then especially when I am looking online I get the error message saying: my graphics card is not responding and the laptop stops or gets himself. I challenged tech stores to be looked at, but they were not able to fix it. Does anyone have any suggestions? Thank youOriginal title: help again...I have moved your question to area drivers & hardware.
If your PC uses the Intel chipset, see this: http://communities.intel.com/message/172740#172740
Updated drivers can be made of:
https://Downloadcenter.Intel.com/default.aspx
Best bet may be to contact the vendor of PC.
-steve
Maybe you are looking for
-
Blurry text after adding a keyframe to css
After you have added a text key frame tent, all text on the page in view is hazy on the loading of the page but brightened after the scroll of the framing out of sight area & is ok even return the marquee again in sight. I see the same thing on the t
-
Impossible to debug UIWebview with Safari 9.1
Recently updated to El Capitan 10.11.4, it comes with Safari 9.1. Now, I'm unable to debug UIWebview on iOS Simulator (tested on 9.2 iOS and iOS 8.4. both don't work). In the setting of safari Simulator are as follows. Inspector Web is running, JavaS
-
Error: "cannot find the path specified for the old driver X5XSEx_Pr135.
Original title : can not find the path specified for the old driver X5XSEx_Pr135 is the message I get. How can I solve this problem? What is a legacy driver? Can you help me solve this puzzle? I have no idea how to solve this problem! Help
-
Does anyone know if a GeForce GTX 260 will work with office a6750f model?
-
I try to install MMC 3.0 (Windows XP-KB907265 - x 86 - ENU) on a clean windows system 7 (4 Gig of RAM and 150 GB disk space available) I get the error "Not enough memory is available to process this command" which is obviously not the real problem.