Satellite A300D is runnig but the screen remains black

Similar Questions

• MacBook Pro 2015 turns on but the screen remains black...

  Hello

  Today, I tried to turn on my MacBook Pro, but my screen stays black. When I press the caps lock button, it turns green which I guess means he lit. I've also heard the startup chime it generally makes when you turn on. I already tried to turn it on and off several times and reset the SMC and the LANDAU... The screen is always black.

  Could someone help me please?

  Also a few minutes ago the fan has started to make noise in the macbook...

  But the screen remains black.

  Thank you

  Shaynidw

  Hi shaynidw,

  From your description, it seems that your MacBook Pro is powered, as soon as you hear the startup chime and see the light on the keyboard.  Thus, it seems that the problem may be with your screen or the video card.

  On the screens you see when you start your Mac

  Power on

  

  When you turn on your Mac, display is off (black) and you hear a startup chime. Your Mac Initializes his BootROM and memory (RAM live). It then performs a power - on that self test (POST) and a test of BootROM. If you hear beeps or chimes at this stage, this indicates a possible hardware problem and start stops. If you add memory to your Mac, check that it is installed correctly.

  White screen

  

  After that only walking self-test is completed, your Mac sends a video signal to your connected screens. The screen may appear black or grey at this point in the boot sequence and backlight of the screen should light up. If you do not see the image appears on your screen after a few moments, try increasing the brightness of your screen. If you use an external monitor, make sure it is properly connected and turned on.

  shaynidw, if set up the brightness of your screen does not help, you have an external display (computer screen or TV) that you can attach to your MacBook Pro to test?

  In addition, you can try to start your computer in safe mode to see if you get different results.

  Try safe mode if your Mac does not end commissioning

  If the problem persists, you may need to take your computer to an Apple Store or service provider authorized Apple , so they can inspect the video card and cables to isolate the problem.

  Take care.

• 32L3441DG - bright green but the screen remains black

  I turned on my PC and my TV, everything has worked perfectly.

  When I came home from school, my PC was on but I turned off my TV when I went to school. I tried to turn it back on, the light was blinking red and green as usual when you turn it on. When he stopped flashing green, the screen remains black.

  

  Posted by Patrick p
  

  I turned on my PC and my TV, everything has worked perfectly.

  When I came home from school, my PC was on but I turned off my TV when I went to school. I tried to turn it back on, the light was blinking red and green as usual when you turn it on. When he stopped flashing green, the screen remains black.

  Hello, I have the same problem.
  I can hear TV-Programm, but the screen remains black.
  Uwe,

• Acer blue 720 and the fan are on but the screen remains black

  Hello

  I appreciate any help that can be provided.  I tried to remove the batter on my daughter 720 and reinsert, but this problem persists.  I can hear the fan and the blue light turns on but the screen remains black.  I tried to rest for 30 seconds and esc, refresh and power.

  Thank you

  Well, when the scrween does not at all (even in text mode which allows a recovery) then it is most often a problem with the cable bwteeen the motherboard and screen, most often following it is a failure of the screen (which requires generally a matter of co-location as cracked screen) and from time to time, it is the motherboard. Probably time to contact Acer support to see on a repair.

• Alienware x 51 starts, but the screen remains black.

  I bought my x 51 all with warranty 1 year ago a year and a half, recently it has been giving me some problems and today I can't use it yet at all.

  The problem started with my screen remains black when I turned on my computer (punt, never awake from sleep), but which would be corrected by me once or twice by restarting the computer. That did not last too long, and soon it did not matter how many times I rebooted the computer. I finally had to unplug the computer and press and hold the power for 30 seconds to see if it worked.

  He did, but this solution has worked only once, and now I have nothing seems to regularize my situation. I tried switching monitors and cables with my brother (who is an identical 51 x), but nothing has worked.

  To summarize:

  My computer turns on.

  Not funny lights or noises (save a beep on startup)

  Screen remains black on reboot of the screen it says he receives no signal and falls asleep.

  No problem when it runs normally (not funny colors, stripes on the screen or blur).

  Help, please. Dell support wants 70 to 110 dollars to listen to even my problem, which is money, that I don't have at the moment.

  Thanks for anything that might help!

  Sounds like you have a dead video card, from the link above looks like there is no output from vga Intel to tun tests, you must remove the old video card and test with another video card that works to verify that the card is in fact dead, like your brothers x 51 remove the video card and test it on your machine.

  If I had this machine in front of me I would use one of these babies for once then run tests on the video card.

  HDMI to DVI

• HP Pavilion dv7-1240us: preheating indicator light, a fan noise is heard, but the screen remains black, laptop will not start.

  Perform a hard reset

  I added an external monitor and restart the computer. All seeing power are on, fan and hard make sounds and still nothing on both screens.

  Reinstall all hardware

  Still nothing but black on both screens.

  Is it possible that a virus could cause black screen and does not start.  Seems the laptop crashes, because all the lights remain.

  Please notify.

  Hi there @SVJ69

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you get a white screen when you turn on your system. I'm happy to help you with this. I would recommend that you start with searching through this page. Since the construction in and external display do not respond, I would start with the displays.
  Troubleshooting of black screens with no start-up or start-up error message
  Problems related to laptop (Windows 7 and Windows 8) displays

  This can help more evenly. If another hand, you get error messages, or a repetitive pattern of flashing LED, let me know.

  Computer won't start (Windows 7, Vista, XP)

• Satellite A300 - turn is not on, the screen remains black

  I have a laptop Satellite A300. I tried to turn it on when I got home from work and the screen remains blank. The bottom (plug, power and battery lights) turns on but the screen remains black.

  Can someone help me?

  Hello

  It of hard to say what's going wrong here, but maybe it s just a small issue that could be solved easily.
  Try this;
  Remove the battery, disconnect the adapter.
  A few hours and reconnect the two parts.
  I had this problem in the past and leave the laptop disconnected during the night.
  The next day, I connected battery and adapter A\c and the laptop worked again

  Maybe this will help you too

• HELP computer HPg61 turns on, the screen remains black

  I put my computer into power saving mode and then it locked, so I forced the closing down. Now, when I turn it on, everything seems to work fine, but the screen remains black and two lights flash in sync - one by the capslock key, and other upward by the end/sys rq and pg up/buttons break. What should I do to get out of this?

  -HP g61 laptop

  -Windows 7 home prem

  Hello

  al1986 wrote:
  

  I put my computer into power saving mode and then it locked, so I forced the closing down. Now, when I turn it on, everything seems to work fine, but the screen remains black and two lights flash in sync - one by the capslock key, and other upward by the end/sys rq and pg up/buttons break. What should I do to get out of this?

  -HP g61 laptop

  -Windows 7 home prem

  Try a hard reset:

  Remove the battery and unplug the DC power adapter.
  Press and hold the power button for more than 15 seconds.
  Plug the DC power adapter (leave the battery for now)
  Press the power button

  Please post your results here.

  Best regards
  ERICO

• HP2000 369wm: connected replacement screen, the screen remains black.

  Hi I'm new here, I tried to find the solution here, but I can't find what I'm looking for but anyway...

  My laptop had a broken screen so I used an external monitor via the vga input. One day I was messing around on the web and I got a virus that paralyzed the system that all frozen cuz then I thought that if I plugged in my phone that I could try to fix it, but eventually transmitting it to my phone, but luckily I could reset it. I thought that if I replaced my screen that I would be able to get the screen for boot sequence or something but the screen remains black and externally will not work. There is something lacking in me to use the primary monitor, I just put? Or is there a way I can format without being able to see? I'm sure that the virus all messed up my boot sequence, but without seeing the screen and unable to use external, I am at a loss.

  cruizer71 wrote:

  Sorry Ive had one hell of a record time on my account here. I couldn't find the PDF you were making reference to, could you post a link?

  regarding the laptop:

  model: hp2000-369WM

  series:

  product: QE339UA #ABA

  OS: WINDOWS VISTA 32-bit (I think, but its vista for sure)

  is there another number or anything I should post?

  Here is your model and it doesn't have a Vista operating system... it's a Windows 7 or Windows 8 double, so check again?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5171087&LC=en&cc=us&DLC=en&cc=us&lang=en

  And your billboard is the reference number corresponding to this HP part number:

  15.6-inch, HD, LED, display panel BrightView 645096-001

  It shows that a single panel comes with this laptop.

• Qosmio X 770 turns on but the screen remains blank

  So my Qosmio X 770 turns on but the screen remains blank, it was randomly turning every so often, but now it is just blank.

  The hd works fine again, I tried to plug it into a TV to see if it works, but no signal is found. I was informed by a friend that it could be a problem with the graphics card, I wonder if it can simply be exchanged if I buy a new one or if he joined, and I have to replace the whole motherboard?

  Any help would be appreciated.

  Even if the HARD drive is faulty, the laptop should be able to IT and you should see the home Toshiba on the internal display screen.
  If its definitely NOT drive HARD problem.

  You said that you have connected the laptop to the TV. You see the start of Toshiba on the external monitor (TV) screen? Are you able to access the BIOS by pressing F2?

  If this is not the case, there is certainly a hardware problem.
  It could be a fault of memory modules, graphics card or the same motherboard malfunction could be possible.

  GPU problems or the motherboard, the whole motherboard must be replaced and that's expensive fix because mobo belongs more expensive laptop.

• When I start my Satellite A300 the screen remains black

  When I turn on my Satellite A300, the screen remains black and doesn't change at all... Any help please?

  What is password problem in your other thread? Already solved or what?
  If the problem persists, I don't see any sense to start this thread because people don't understand what the problem is.

  Please do not mix two questions and explain exactly what you see on the screen after turning on your laptop.

• I just bought my hp pc Pavilion g series, but many times not dΘmarre; the screen remains black or blue and must strive to market several times. What is going on?

  When I turn off my pc and that you want to turn it back on, it does not work and the screen remains black or blue, sometimes but nothing else and does not

  starts up, until I have try several times in pushing and disable the power button and suddenly starts working again. The pc is almost brand new (2 weeks)

  What is going on?  Thank you very much

  Hello

  I suggest you do the repair of the system startup and check if that helps resolve the issue.

  Check the link for more information on repair system below.

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  You can also check the event viewer for more information on the error message.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  See also:

  Resolve stop (blue screen) errors
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

  I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.
  How can I go back to single screen?

  Hi Bilipino,

  You have more than one display card? Try to connect your monitor to the another card and see if you can get the display.

  Reference: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

  I hope this helps...

• Toshiba Qosmio DX730 PAQ13A - no signal - the screen remains black

  When I turn on PC (all in a single DX730 PAQ13A-010005) the amber light turns white as it should. However, the screen remains black.
  If I unplug the connection, and then reconnect it, a message appears on the screen indicating 'PC', it then changes briefly to display the message no Signal.

  He will not go to log in screen etc. because the screen stays black.

  All advice appreciated.

  Must be the hardware problem.

  It seems that no signal can be picked up by the monitor...
  Probably the mother or any other element connected to the motherboard is defective...

  I guess its time to contact a technician if you want to solve this...

• After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything

  After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything

  Hello

  1. what operating system is installed on your computer?
  2. is it works much earlier?
  3. don't you make changes before the problem?

  Check if the game is compatible with Windows 7 Compatibility Web site. The game mentioned above is not listed in the compatibility Web site, it may or may not be compatible with Windows 7.

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Update of your display drivers and check if the problem persists.

  Step 2:

  Reduce hardware acceleration and check.
   
  a. click the Start button, Control Panel.
  b. now, select appearance and personalization. under display, select adjust screen resolution.
  c. now, select adjust the resolution.
  d. click Advanced settings.
  e. now, click the Troubleshooting tab, and select the change settings button.
  f. in the Security dialog box, click on continue.
  g. move the hardware acceleration slider to the third notch.
  h. click OK.
  i. restart Windows.

  Step 3:

  If the game worked fine in the earlier version of the operating system, I suggest you run the game in compatibility mode.