Satellite A350-212: Impossible to activate the microphone

Similar Questions

• Satellite Pro P300 - impossible to activate the built-in microphone

  I bought a Satellite Pro P300 some 2 months and so far so good.

  It has a webcam which I really thought that I would have any use for it but now find that I have.

  The camera works fine but I cannot activate the built-in microphone.

  Can someone point me in the right direction please

  Hello

  You will need to start the webcam software if you want to use the internal microphone too.
  The point is that the internal MIC is connected with the internal webcam and webcam software handles both devices.
  Also check if the internal mic has been correctly enabled in the webcamsoftware

  In addition, I would recommend updating the audio driver.

  Best regards

• Satellite Pro 400CS: impossible to activate the APM

  Hello, I have on my pro 400Cs satellite I installed windows. In the equipment manager, APM support is disabled. If I have, it will activate and after a reboot it am off again. In addition, the announcement of the battery is missing. Sleep mode does not go as. If I have the software utility downloade it indicates with the announcement of the program Toshiba stack.

  What it am I do?

  By
  Frank

  Hello

  This device is a good old classic. As far as I know that it s about 10 years.
  It was delivered with the Win95 and Win98.
  Well, I can't give you a solution to your problem because this unit is too old.
  You'll be a man of luck even if someone here in the forum knows an answer to your problem. All I can suggest is to check the BIOS. Maybe that here you can activate or change it in addition the battery settings.

  Good luck

• Satellite L505-13F - impossible to activate the wireless connection

  Hello, I have connectivity problems with my Satellite L505-13F.

  I can't turn on the wireless connection. I press Fn + F8 and nothing happens. The indicator at the bottom of the laptom turns on.

  I though this would be a problem with the drivers. I downloaded realtek wlan driver here [http://aps2.toshiba-tro.de/wlan/?page=downloads], but it has not installed correctly. Then I used the toshiba software installer, but yet again, nothing has changed. I have Windows 7 Home premium 64-bit.

  Device management, I have seen that I installed a wifi driver. (Realtek RTL8191SE Wirelless Lan...) So, what the problem is?

  Any suggestions?

  Hey,.

  Something happens if you press other keys FN or FN + F8 doesn't work only? Normally with this key combination you can enable/disable wireless network card.

  In addition, it would be interesting to know what happens if you are looking for WLAN networks. You see your WLAN router?

  If all the keys FN n t work, reinstall the package of added value and utility to Support Flash Cards. Otherwise, it could be another problem and you should reinstall the driver again and make sure the firewall isn't blocking the connection.

  See you soon

• Re: Satellite L100-179. impossible to activate the new WLan card inserted

  Hi all

  I bought a computer laptop satellite L100-179 wireless about 2.5 years ago.
  Last week I bought an Inter (R) PRO/Wireless 2915ABG Network Connection, this is an internal card!

  I installed the card and the latest drivers and the card worked properly under Device Manager
  When I tried to use the card after setting the wireless settings, I started to have problems.

  I then installed the software for the card help with the problem which has been the software Intel(r) PROSet/Wireless WiFi 12.1.2.0 that gave me a little more information about the problem. All the settings for the wifi are enabled except when I press Fn + F8 I get the following message:

  Wireless communication is disabled. Please turn on the wireless switch.

  But there is no switch on the side of the laptop just a plug of cache.
  I've ran out of ideas to get this working and would be really grateful for the help.
  My OS is XP home SP3.

  Hello

  I think that your Sat L100-179 is not extensible WLan.
  If this laptop has been delivered without the WLan card and the WLan switch does not exist, then you cannot use an internal WLan card!

  In this case, go to an external solution such as a USB WiFi key for example

  Welcome them

• Satellite L20-181: Impossible to activate the display on the TV

  Hi, I can't get my laptop to display on my TV. I use a 4pin s-video/rca cable. I'm sure that the cable works well because it works when I use it to connect my desktop pc to the tv.

  Maybe it's possible that the configuration of the pins for computers laptop toshiba are different from the whole usual upward?
  If anyone can help it would be appreciated.

  Hello

  Try to use the FN + F5 key combination.
  This function should change the display devices.

• Installed the programs see the emptiness on the Satellite A350-212

  Hello

  I hope someone can help here. My brother left England in the Turkey a couple of years ago and his cell phone, which was the United Kingdom's irreparable, so he bought one in Turkey, A Toshiba Satellite A350-212 and has problems with the downloads. For example he downloaded a free trial of Coverxp and he seemed to download ok and asked if he wanted a shortcut on the desktop. He said yes to the shortcut, and as I say, it seemed to have installed ok.

  The iicon office never appeared and the Coverxp in all programs also shows empty.
  This is the case for most of the things it has downloaded, such as the trial version of Winrar.
  In programs and features uninstall, applications are here. In my view, this could be a security problem.

  All the things he tried to install it I installed on Vista without any problems

  If anyone can help with information ill be most gratefull

  Thank you.

  Hi mate

  First I put t think it's a problem of Toshiba.
  I recommend saving the downloaded packages somewhere on the second partition.
  Then go to that partition and unzip the package.
  Then follow the installation instructions.

  By the way; shortcuts on the desktop can be created manually.
  Simply right-click on desktop and create a new shortcut and point to the exe of the installed software.

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• Portege R500 - cannot activate the microphone

  Hello

  I have a laptop R500 installed with Windows XP and Realtek 5.10.0.5404 driver.
  With this driver, I can't activate the microphone so that I can't use Skype.

  Without this driver, I can turn it back on but my speakers don't turn off when I plug in a headset, so that everyone can listen to my Skype calls.

  So I have a problem with and without this driver.
  How can I solve this? Is there another driver, I can use?

  Thanks for any help.

  Have you tried to disable the Microphone Noise Cancellation?

• Satellite A350-12J said to insert the DVD + "this is a system error.

  I recently bought a toshiba Satellite A350-12J...
  The computer tells you to insert the DVD + this is a system error...

  Please insert the DVD - disks to perform backup of the recovery disks.
  I hope it is of some help, I am now almost bald of pulling my hair!

  Hello

  You are not able to boot the system? Or what?
  What happens if you press F8 immediately after the laptop was turned on?
  You then see the start menu?

  If you can access the advanced boot menu, then you could try using the option called last good known Configuration (Advanced).

  If this will not help and you will not be able to restart the laptop then choose fix my computer-> Toshiba HDD recovery and reinstall the OS using the Toshiba HDD recovery option.

  See you soon

• activate the microphone

  I just tried to work through the troubleshooting microphone.  When I went to 'manage Sound Devices' there is no microphone on the Security tab.  The line is there but not the microphone.  I guess I have to activate the microphone, but I don't know how.  Any suggestions?

  p6406y.  Windows 7.  I actually fixed it by reloading the driver from Realtek.  Thank you.

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n