Satellite A350-212 - touchpad no longer works

Hi all, I have some problems with my FN keys, my touchpad no longer works, in addition to this, when I press the FN key, I don't see any icon on the top of the screen... Two days ago, all this did not work properly... An error is given by the program called Tossiba assist, its written exactly this way: this system cannot use accessibility... Could you please help on this issue?
My operating system is Windows vista 32-bit (service pack 1)

Finally, sorry for my English if I make mistakes, it is not my mother tongue...

Thanks in advance

Try to restart flash cards.
Start > all programs > Toshiba > utilities > restart Flash Cards

After doing this press FN button several times to see if Flash Cards are still on the top of the screen.
If you see Flash cards again use the FN + F9 key combination to activate the touch pad again.

Tags: Toshiba

Similar Questions

  • Satellite U400 - 10L - touchpad no longer works

    Suddenly, my touchpad doesn't work.
    Any suggestions that might help with this problem?
    My laptop is Satellite U400 - 10L

    Hello

    I think that you should first check if the touchpad is not disabled.
    Check the FN + F9 key combination.

    If the touchpad still does not work, try reinstalling the driver for the touchpad.

    Welcome them

  • Satellite M70 PSM73C - touchpad no longer works

    For some reason any my touchpad isn't working.

    After trying unsuccessfully to get it working again, I found the software installation driver (tpdrv-xp - 603056.zip) on the Toshiba site.
    I thought I would uninstall and reinstall to fix the problem, but when I try to start the installation I get the cryptic error messages.

    The shield of the installation does not work yet.

    Anyone who has had success or knows how to get this software to install the touchpad?

    Thank you.

    What error message you get exactly?

    To reinstall or update the driver for the touchpad, you should delete the old first in Add/Remove Programs, restart your computer and install the new version from the Toshiba site.

    Check this box and post your result.

  • Satellite L305-S5921 - Touchpad no longer works

    Thanks in advance for any help.

    I had my laptop for about a month now, and about a week in I plugged a USB external mouse because I prefer it on the touchpad. One day I decide to unplug the external mouse and use the touchpad for a bit, but when I unplugged and allowed to the touchpad, touchpad does not work.

    I tried the FN + F9 key combination several times but it does not work and I have also reinstalled the drivers for the touchpad repeatedly and they have not worked either. I also uninstalled the touchpad drivers and rebooted the computer, leave the computer to deal with reinstalling the drivers, but the result was the same.

    Someone at - it other ideas or do I have to send my laptop in for repair?

    Hello

    Did you install additional software for external mouse?

  • Satellite C55 has - touchpad no longer works

    Happens all the time, whenever I pass the screen connection on my laptop touchpad not working?

    Can use a USB mouse as a back-up, but the laptop is only 5 weeks that I would be expected to be any good for much longer?

    TIA

    Lee

    Have you tried to turn the touchpad on or off by using the function key (FN + F5)?

  • Re: Satellite C660-1LD - Touchpad no longer works

    Hello

    I'm having this problem because more than a month now, the touchpad works all of a sudden and it starts to work after a reboot, and sometimes after a few reboots.

    The frequency of this issue is at least twice an hour. I'm really tired to restart all the time.
    I tried the system restore, but that did not help and the function keys do not work or the other.

    Details:
    Model: SATELLITE C660-1LD
    OS: Windows 7-64 bit
    : Warranty 03/2013

    > I tried the system restore, but that did not help

    What exactly do you mean by restoring the system?

    Have you used the Toshiba Recovery DVD or Toshiba HDD Recovery procedure to restore the laptop to factory settings?
    In the case where you don't who has not tried, I recommend doing that!

    The fact is that this recovery procedure should solve the problems of system/software and in my opinion, it looks more like a software like a hardware problem.

  • Re: Satellite A105-S4001 - touchpad no longer works

    Hello

    The touchpad on my laptop has stopped working suddenly. The two buttons below are functioning normally, however. When I tried to open a link, I could always do it by gently pressing once the touchpad. Now, it does not so I have to click on the links with the left button. I tried to disable and enable synaptics (in Control Panel as well as by the Fn F9), but to no avail. Any suggestions? I'm afraid that it is something that can't be fixed because the laptop is already quite old (4 years) but I hope someone can prove me wrong.

    Thank you.

    Hello

    You should try to reinstall a driver for the touchpad, I think that your model belongs to the region of Usa. So, check here:

    [Toshiba American driver page: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp]

  • Satellite C70 - A - 15 d - Touchpad no longer works

    My touchpad no longer works. Windows 8.1.

    New drivers can not be installed. MOMENTUM: error message bad touchpad. Synaptics: obviously empty zip file after downloading.

    Any idea where I can get the zip file of work?

    Are there function keys that enables / disables the touchpad?

    Thanks for the tips!

    + The message was edited: model number added to the object.

    many answers but we cannot reply if we do not know what model of laptop you have, so please the exact post model name of your laptop by Satellite.

  • Touchpad no longer works after update BIOS on Satellite A500-1GL

    Hello world

    I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

    Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
    After that Windows 7 (x 64) started the touchpad no longer works...

    I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

    I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
    But unfortunately it still doesn't.

    Now, I'm out of ideas, can anyone help?
    Is there a chance to get the older version of BIOS to downgrade it?

    Thanks in advance ;)

    Hello

    It seems strange that after update Bios touchpad no longer works.

    > Is there a chance to get the older version of BIOS to downgrade it?

    To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
    The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
    Advice for the future; Do not touch the running system.

    Good luck!

  • Satellite C70 - B - Touchpad does not work

    A couple of months, I bought the Toshiba Satellite C70-B-212. However, in recent weeks the Touchpad no longer works. I already reinstalled the driver, but that didn't help.

    What can be the problem?

    Go to the BIOS settings and check if the pointing device is enabled.
    You can also load default settings in the BIOS. This should allow the pointing device (touchpad) too.

  • Installed the programs see the emptiness on the Satellite A350-212

    Hello

    I hope someone can help here. My brother left England in the Turkey a couple of years ago and his cell phone, which was the United Kingdom's irreparable, so he bought one in Turkey, A Toshiba Satellite A350-212 and has problems with the downloads. For example he downloaded a free trial of Coverxp and he seemed to download ok and asked if he wanted a shortcut on the desktop. He said yes to the shortcut, and as I say, it seemed to have installed ok.

    The iicon office never appeared and the Coverxp in all programs also shows empty.
    This is the case for most of the things it has downloaded, such as the trial version of Winrar.
    In programs and features uninstall, applications are here. In my view, this could be a security problem.

    All the things he tried to install it I installed on Vista without any problems

    If anyone can help with information ill be most gratefull

    Thank you.

    Hi mate

    First I put t think it's a problem of Toshiba.
    I recommend saving the downloaded packages somewhere on the second partition.
    Then go to that partition and unzip the package.
    Then follow the installation instructions.

    By the way; shortcuts on the desktop can be created manually.
    Simply right-click on desktop and create a new shortcut and point to the exe of the installed software.

  • Split 13 x 2 touchpad no longer works

    I have a new split of HP 13 x 2. The touchpad no longer works. This is the latest driver Synaptics Touchpad (17.0.10.9). I'm under WIN 8.1. I have to close the session and then again for the touchpad to start working again. Any suggestions?

    Took a little digging on the forum but found this solution that worked for me in solving the touchpad freeze problem:

    http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/split-X2-touchpad-problem/m-p/3361845#M48265

    Hope this works for you.

  • Touchpad no longer works after the clean boot

    Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

    Original title: scrolling Touchpad no longer works after the clean boot

    Hi lauranne.

    What is the brand and model of the computer?

    I would like to put the computer into normal mode and check if your able to use the touchpad.

    See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

    How to perform a clean boot in Windows
    http://support.Microsoft.com/kb/929135

    If you still have questions, please refer to the article to give below, and follow the instructions.

    Mouse, touchpad and keyboard with Windows problems

    http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

  • Satellite C55 - Touchpad no longer works

    Hello

    The touchpad on my C55 no longer works.

    After you restart the touchpad works until I signon to Windows. After this, all functions will stop.

    A few days ago, I think that some Windows updates have been launched.

    Is that what someone else has had this problem and can you give me a solution please?

    In addition, immediately after the entrance to Windows, it works always, but after a while, he stops. This rings a Bell?

    The driver for the touchpad seems to be ok.

  • My Satellite Pro A200 (PSAE7E) touchpad no longer works

    Dear Sir.

    My problem is my touchpad does not work, I usually enable it or disable it in a tab to hide automatic at the top of my desk (which was disappeared after I updated to Vista SP1), after that and accidentally stopped the pointing device driver,

    I tried to re - install again but I could not find out who the good driver for my laptop is (ALPS Synaptics pointing device or pointing device)?

    I tried to press FN + F9 key but I had no change that the touchpad is not working, so I have to use a USB mouse...

    Can you help me please

    Note that I'm using Windows Vista Business SP1, Toshiba Satellite Pro A200 (PSAE7E)

    Thank you very much

    Zaid

    Have you checked the Device Manager? Normally, you should see what touchpad you have exactly.
    So the latest driver, you can download the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online support & downloads-download drivers online

    Check it!

Maybe you are looking for

  • HP Slate 21 Service Repair?

    I have a 21 slate and affecting stopped working. I have tried the factory reset and it does nothing.  I tried to reset as well in the start menu and it does nothing.  I went to the support site and put my serial number and it tells me that my product

  • Possible problem with the Macbook pro retina display 13 "

    Hello, good afternoon: I just bought a new Macbook pro 13 '' two days ago Retina and everything seems ok until I see a rare noise which is like a whistle of low volume. This happens regularly, but sometimes every 10-15 seconds. I detect it only when

  • Y570 WOL

    Someone configure Y570 WOL (Wake-on-lan)? I tried but no luck, thank you for any help.

  • Unable to connect to the server... error code 0 x 80070043

    Hey you all. We have a server on the network that contains the software and the data we use in a client/server parameter. To install the client side, we do the following from the workstation: START / RUN / \\10.20.0.77 which opens a window on the sof

  • A VPN client can go same interface on the Pix 515

    A user in a Pix VPN and get an address x.x.x.x via an ippool on the Pix. Once this is done, they will need access to information on the public network. Is it possible since they come out of the same interface? I can open ports and route subnets on ou