Satellite A350-22D - cannot activate the network (Windows 10) wireless adapter

Similar Questions

• Satellite U500 - 11G - cannot activate the upgrade to Windows 7

  Really sorry to this topic, but with the new Satellite U500 - 11G can not activate the upgrade to Windows 7. Keep told by entering the serial number that it was origonally installed with Vista, but no info on how to activate it.

  Any help here please?

  Hi mate

  The Toshiba pre-installed Vista OS has already been activated.

  AFAIK if you upgraded the operating system Vista to Win 7 using the Toshiba Windows 7 upgrade kit then a Win 7 must be already activated and does not need to be enabled separately

  See you soon

• Satellite C850-1F2 - cannot activate the touchpad

  Hello

  Recently, I installed Windows 7 on my C850-1F2. For the installation to finish, I had to disable all unnecessary devices in the BIOS, including the internal pointing device/keyboard. After that, the installation went well and I subsequently installed all drivers (downloaded from Toshiba) manually correspondents.

  All devices can be installed and work properly - with the exception of the touchpad.
  If I re-enable the touchpad in the BIOS, Windows will not start. It just stops at 'Starting Windows' screen - not the gel (continuous loop animation), it will not simply continue. Starting in safe mode, it will also stop after loading all the drivers. I've had the laptop that works all night to see if I was just being too impatient, but nothing helps.

  Also, the system does not detect the touchpad. Manager devices displays only the USB mouse, that I have connected or anything. When you access the parameters of 'Mouse', the system will first ask me if I want to uninstall the Synaptics drivers. I have thus tried to reinstall the Toshiba and the generic Synaptics driver but no touchpad.

  If I use FN + F5 to activate the touchpad (while it is already disabled in the BIOS), I simply disable the keyboard. The touchpad does not work. However, I have to disable it again, then put the laptop to sleep and it wakes again so that the keyboard works again.
  Furthermore, if I reboot after using the fn + f5, again, the touchpad is enabled in the BIOS and Windows does not start.

  I'm really confused at this point. What Miss me?

  > For the installation to finish, I had to disable all unnecessary devices in the BIOS, including the internal pointing device/keyboard.
  I installed Win7 several times but I never heard of something like this and I've always installed when moved the BIOS default settings so I put t understand this theory and does not understand why you did that.

  In any case, if nothing works well I highly recommend to upgrade the BIOS to the default settings and then install the clean version of Win7. I hope you are using Microsoft original installation disc and not some self made things.

  I put t think that there is a magic trick that can solve your problem.

• Impossible to activate the USB Belkin, f5d8055 wireless adapter in Windows 7

  I have an old Dell Laptop Inspiron 6400 PC I installed Windows 7 Ultimate on. The built-in wireless adapter works well, but I would like to use an external Belkin F5D8055 N + USB adapter for inclease & range performance.
  So far, I installed the drivers for the correct adapter on the Belkin site and they seem to install correctly. The adapter is recognized and no error display in Device Manager.
  If I disable or uninstall the integrated Dell wireless adapter and try and turn on the Belkin adapter, while the message displayed indicates that it allows, the adapter is disabled and grayed out. I even turned off the Dell Wireless card in the bios that actually no difference.
  I know that the adapter Belkin F5D8055 working as I tried to install it in another laptop (Lenovo) and it works OK.
  My question is what could be causing the adapter Belkin to stay disabled? Is this something that is that collide with the Belkin drivers?
  I find a second laptop Dell Inspiron 6400 with the same generation and has the same symptoms with the Belkin adapter.
  I also tried a former C and W USB wireless adapter and it also will not help.
  Is there a fundamental issue with computers Dell laptop, Inspiron and Windows 7?

  Any help would be appreciated.
  Thank you very much

  Hi Zach, you are quite correct! I have now uninstalled Zonealarm and the Belkin adapter install and activate OK. Thank you very much.

  Do you know if Zonealarm can be configured to work with the Belkin adapter, or is it one or the other?

  Thanks again.

  Unfortunately, it's going to be one or the other, try to reinstall.

• If I enable security on an ad hoc network, my Windows 7 client cannot recognize the network at all.

  XP host and client windows 7 on ad - hoc network...
  Dear friends, I have set up an ad hoc network between two laptops. The host is running on xp sp3 and the client is running windows 7.
  Now the problem is that if I enable security on the network, the client windows 7 cannot recognize the network at all.
  If I turn off security on the network ad-hoc, everything works fine and I can share files and access the internet on client... Please help

  Ok

  Now, I'm pretty sure that I understand your game up. Well done to get the internet connection, sharing of work (not a simple process) but without encryption.

  I am sure that the problem lies in the Windows 7 laptop (laptop 2). When you switch cell 1 to WEP, you must also pass portable 2 to WEP and provide the WEP key you have configured with laptop 1.

  It's getting late here now, but I'll try to answer tomorrow after I have test it on my two laptops to Windows 7. In the meantime maybe I can point you in the right direction...

  • Right-click the the small icon at the bottom right of your screen on laptop network 2 and then click on Open Network and Sharing Center
  • In network and sharing Center, click on manage networks wireless (nearby at the top left)
  • Click Add, and follow the wizard to create an ad hoc network, selecting WEP and providing the encryption key you configured on the notebook 1
  • Save the network so that you do not have to repeat this procedure.

  Otherwise, when you get to manage wireless networks, if your ad hoc network is already listed...

  • Right-click in your ad hoc network, and then click Properties
  • Click the Security tab
  • Change it to WEP and provide the encryption key
  • Click OK

  Good luck, I will pick up this new after my drowsiness.

  Tricky

• When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network.

  Unable to connect because of firewall or something, not true of course

  When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Also read these articles and check:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702/en-us?p=1

• When I perform a net view on, I get the error system error 51 next. Windows cannot find the network path.

  Net 51 with a view system error

  I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.

  However, when I perform a net view on, I get the following error

  51 system error has occurred.

  Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.

  How to make this command work?

  Hello

  ·         Your computer is on a domain network?

  Follow the steps in troubleshooting this article and check if that helps:

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  See also this article that resembles the same error.

  Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."

  http://support.Microsoft.com/kb/259878

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• Cannot start the network connection: invalid access to memory location

  Hi team,

  Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location.  Can you help me on this issue?

  Thank you

  Sangaré

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• cannot activate the automatic updates on my laptop.

  original title: cannot activate the automatic updates on my laptop.  Were follwoed instructions Update window without success.  Help!

  Automatic message updates consistent warning box are not on.  Tried several times to move away, but still says that the site has encountered a problem.  Now completely blocked

  Hello

  -Did you change on your computer before the show?
  -Did you have performed the steps described in this article?
  -What Service Pack is installed on your Windows XP computer?
  -Have you tried "fix it" of this article?

  I suggest you to test the issue in a new user account.

• Question of ' system cannot activate the graphics performance "T400

  Hi all

  I have a ThinkPad T400 with Switchable Graphics, running Windows 7 x 64, with the latest drivers provided by Lenovo.  I tried to go to the ATI graphics card today for the first time in a little and got a message "system cannot activate the graphics performance", invites me to disable all external video connections or disable all graphics applications.

  The problem is, I don't have any open application.  I disabled several startup programs, uninstalled VMWare Workstation and tried several services, I thought that might interfere with the manual - still no luck switching.  I'll reinstall the driver, but in the meantime, anyone have any ideas, or find a resident program that tempt me not not to be able to switch from Intel for the ATI graphics card?

  I believe that after checking the system logs, the error was somewhere in libraries Visual C++ Runtime. I decided at this point, that the question was too difficult to follow and with Service Pack 1 available, I saved and reloaded. Problem solved.

• Cannot access the network ERR_NETWORK_ACCESS_DENIED

  I have Windows 7.  Nothing works, I tried chrome (which will not even load) and Firefox (it has been a constant problem with gmail for well over a year).

  Cannot access the network

  ERR_NETWORK_ACCESS_DENIED
  Google Chrome has access to the network.

  Maybe it's because your firewall or antivirus software wrongly think that Google Chrome is an intruder on your computer and it blocks to connect to Internet.

  Chrome allow access to the network in your firewall or anti-virus settings.

  If it is already listed as a program allowed to access the network, try to remove from the list and Add again.

  I tried the above, but can't seem to solve the problem.  Thank you.

  Hello Paul,

  Thanks for posting your question on the Microsoft Community.

  I would like to know some information about the problem so that we can help you better.

  The same problem occurs when you use Internet explorer?

  Thank you for details on the question and your efforts to resolve.

  If the problem also occurs when you use Internet explorer, I suggest you use the steps in this article and check if it helps.
  Reference:
  Can't access some Web sites in Internet Explorer
  https://support.Microsoft.com/en-us/KB/967897

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also see this article:
  Understanding Windows Firewall settings
  http://Windows.Microsoft.com/en-us/Windows/understanding-firewall-settings#1TC=Windows-7

  Note: Firewall and Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not turn off your antivirus software and firewalls. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software and firewall are disabled, your computer is vulnerable to attacks.

  To get help on Google chrome, I suggest you post your question on Google chrome forums.
  http://productforums.Google.com/d/Forum/chrome

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Satellite A110-178 cannot run the Da Vini Code game

  My satellite A110-178 cannot launch the game "The Da Vini Code". following error occurs:

  Encountered exception! You want more information (will take several seconds to determine)?

  When I choose 'Yes', the following lines appear:

  (Slayer) Address of exception

  [no info game crash]

  IMAGE HELP STACK:
  TArchive::operator = + A9D22

  MAP FILE STALKWALK:

  All I can do is press 'OK '.
  the program stops, and that's the end of it.
  I don't know what that means, is there a problem with my hard - or software?

  If anyone can help me and translate the language of code of my computers, I'll be gratefull for this,
  because this is not a cheap game,

  Thanks in advance,

  Davina

  Post edited by: Davina Deleye

  I recommend you to check some forums on this game. I found one under http://www.isohunt.com/forum/viewtopic.php?p=126110

  Maybe you can find answer here. Read it carefully.

• iPhone 5 c cannot detect the network.

  Since the last 9.2.1 update my iPhone 5 c cannot detect the network.  Constantly 'finding '.  It took to the local repair shop and he told me the imei is missing and only Apple can help.  Any ideas, thank you.

  A missing IMEI is a fatal error which cannot be set. This is usually the result of the attempt to jailbreak or hack the phone unlock illegally, but not exclusively.

  Where, exactly, do you have the phone? It was jailbroken? Never 'unlocked' by one person other than the carrier, so it was initially locked?

• HP2000 2D09SLA, cannot find the network controller driver after reclassification of win8 base to win8pro

  HP2000 2D09SLA, PROFESSIONAL 64 BITS OF WINDOWS 8.

  After installing windows8pro, I could not find driver for network controller, since then I can not use my wireless.

  Hello:

  Follow these steps, and I'll post the link to the wireless driver you need...

  Go to Device Manager, find the other devices category, click the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN.