Satellite A350 - NO led WLan, no. WLan in Device Manager

Hello

I have the same problem...

The led does not, not F8 in flash cards, no adapter wifi in Device Manager.
The problem appeared after being reinstalled system.

I tried everything (also this thread) and even to try to install the new wifi adapter - same situation takes place.
When I search on the internet for solutions it apeared that many people had same problem after reinstaled the system.
Please help :)

(btw sorry for errors that may appear in this post in English is not my mother tongue ;)

Post edited by: meraszka

Hello

> The problem appeared after being reinstalled system.
How do you reinstall the operating system?
Have you used the Toshiba Recovery disk?

If not then I guess that you have installed the wrong driver WLan

> no adapter wifi in Device Manager.
You have a yellow exclamation point in device-> network cards Manager?
If so, then that would mean that a WLan driver is missing

I put t know what WLan card you have, but you can find all the drivers here WLan:
http://APS2.toshiba-tro.de/WLAN/

PS: make sure that the BIOS is up to date and it has been set to the default settings.

Tags: Toshiba

Similar Questions

  • Satellite A200 - 26 d: yellow exclamation next to WLan in Device Manager

    Bought this from a parent who was downgraded from Vista to XP pro - The intel 3945ABG wireless card at the point of yellow exclamation next to it in Device Manager

    _ * I tried things * _

    -updated the driver from Toshiba Web site
    -update the driver from the Intel Web site
    -unistalling the device and put it back
    -Disabling the device and re enabling
    -update the bios
    -around of rooting in the bios to see if there are any settings that might work
    -Reinstall Vista
    -Reinstall XP
    -installation of windows 7
    -control of the wireless switch is turned on on the front of the machine

    Trawling the internet for hours to see if anyone else has had the same problem. There is more, but can't remember

    * _things I do not have tried_
    -Disassemble the machine and replace the card
    -a fall from a table to see if things improve

    I am currently using a usb wireless card attached to the lid using masking tape

    Any suggestions?

    Thank you very much

    All drivers Toshiba wlan you can find here:

    http://APS2.toshiba-tro.de/WLAN/?page=downloads

    How to identify the unknown device read here:

    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

    This helps you search within the base driver

  • Satellite L500 - wireless network adapter is missing in Device Manager

    Hi guys, I have read a lot of discussion but not found a job of answer to my problem and yet, although this doesn't seem to be a common problem, so I was wondering if someone can help out me. Model laptop is L500-1VT. There is no switch on / off external WiFi.

    In short:
    -Awake portable sleep, already before his pan was connected to wifi, but suddenly had no connection.
    -Adapter doesn't not appear in Control Panel, so checked Device Manager. Isn't there. : S

    -Thought that maybe something has come loose? But then checked msinfo32.exe and adapter was seen here.
    -Read a lot of discussion about it being from PVAT with FCU, then followed advice doing reinstalls and uninstalling and reinstalling driver wlan (this being seen in lost msinfo32.exe.) Unfortunately, it did not work. Still not apparently visible to windows.
    -Fn + F keys never worked and after reinstall of the above programs still do not work.
    -Wireless is enabled in the bios.

    -However, and I don't know if it's the crux of the problem. * Wireless is DISABLED in HWsetup.exe. When I try to turn it on, it says reboot needed. If I do that immediately, or much later, I get a blue screen and memory dump.* so I'm sure it's a software problem.

    -J' also tried restores system and disks of microsoft repair. But I am at a loss about what to do now, so use my phone via USB WiFi to connect to MTAs.

    If anyone has any ideas, it would be great!

    Hello

    WLAN works when you restart your laptop?
    Latest version of the BIOS is installed on your laptop satellite?
    Have you tried updating the BIOS too?

    And Yes, last question: do you use the original OS that you got with your laptop (recovery image)?

  • Satellite A210-1AO: modem are not not in Device Manager

    I bought toshiba Satellite A210-1AO part number: PSAELE-03Q009G3 with Windows Vista Home Premium.
    There are a lot of unwanted software from toshiba (bloatware) and I wanted a clen of OS windows vista installation, so I downloaded all the drivers from toshiba europe web site and update bios version 1.90.

    I installed vista and the driver necessary, video, recorder, bluetooth monitor, flash media... I realized that this modem is not listed, when I try to install modem driver progress bar if poster and work until the end and then disappear but modem is not listed in Device Manager.
    After many tests modem is still not present or detected by the operating system.

    Mention that I have not any exclamation point in Device Manager and all devices are installed.
    I tried to go back to the old State with toshiba recovery cd and's done it without problem but modem is not present in that too much. BIOS does not include an option to turn on or turn off the modem, so I don't know if it's the new 1.90 bios problem or what?
    Else this medication works very well.

    How to activate the modem? modem port is of course present.

    Are you 101% sure that you see the modem in Device Manager?

    I have a 10Y A210 and in Device Manager, the modem is listed below the mouse and other pointing devices.

  • Satellite Pro A120-145: yellow typical mark in Device Manager

    Hi all

    I have a Satellite Pro A120-145 running Win Xp Pro fully patched and updated, I have a yellow typical marks against "serial" in non-plug-and-play in Device Manager (when I click on view devices).

    Could someone tell me what driver is needed for this? I don't want to use the recovery disc I made a custom Setup to get rid of the excess baggage which is included on the disc.

    Thanks in advance.

    I used advanced search forum and found that Toshiba post document in some discussions of the forum.
    Please read this:
    How to identify an unknown device in Device Manager?
    http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

    Then, you can visit the page of the Toshiba driver and may download the driver for the unknown device.

  • Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

    I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
    In the device manager says code 10 DEVICE can NOT START.

    Help, please!

    Thank you!

    Hello

    If you read here:

    http://support.Microsoft.com/kb/943104

    The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
    Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

    Welcome them

  • Satellite L350 - not visible in the sound card device manager

    Satellite L350 model: PSLD8E
    OS: Vista 32 bit SP2

    Hello

    Cannot install the drivers for sound card and audio device is no longer visible or detected in the vista Device Manager. Tried Realtek drivers toshiba download and disk but still no sound or device after reboot.

    its my dads specifications and he says its just stopped working. When I checked initially, the audio device was reported as driver problem in Device Manager. Remove and try to update the driver, no audio device is no longer only show.

    is it possible that the audio device of the motherboard is loose or defective? Toshiba provides software diagnostic tools to check equipment?

    UPDATE:

    I looked through the windows event logs and discovered several error messages indicating that the PNP device to realtek sound was unexpectedly disconnected.
    don't know if this is due to problem hardware or driver updates.

    Thanks for any help,

    Hello

    Have you tried to update the audio driver of Toshiba page? If she's not always you help, backup all files needed and do a clean install of Windows. Otherwise, it takes more enough time to understand and resolve what the simple installation of Windows and users of the Toshiba forum for the right answer pending. Reinstall it and see if the problem still occurs. The dysfunction of the material is also possible.

    Welcome them

  • Satellite Pro A120: Corrupt registry - error code 19 Device Manager

    I have a Satellite of A.120 Pro I am trying to charge my Creative Zen Sleek MP3 on it but keep getting a Code 19 registry is corrupted message in the Device Manager. How can I fix it

    Hello

    After a short investigation in the Microsoft Knowledge base, I found this description of the error Code 19:

    ---------------------------------

    Code 19:
    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.
    To resolve this problem, you can first try running a Troubleshooting Wizard.
    If this does not work, you must uninstall and reinstall the hardware device.

    This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey. Try these options:

    On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard. Click on uninstall and click Scan for hardware changes to load a usable driver. Restart the computer using safe mode, and then select last good known Configuration. This cancels the last successful configuration of the registry.

    --------------------------------------------

    I hope this steps will help you!

  • Satellite M - DVD/CD ROM missing in my device manager

    My computer for some reason unknown to me, recognize or load content on any DVD or CD that I put in my combo drive. The disc turns and acts like it is loading, but nothing happens. I want to switch from XP to Vista. whether a disk of music or a dvd movie disc, it always does the same thing. I have a satellite M45-S2652. I tried the registration procedure and nothing has changed. Before that, when I clicked in my device manager and everything was ok, he read "(MAT *** un DVD) RAM UJ - 831 S."

    I tried to use my windows recovery disk, but the computer does not recognize it. I tried the restore later, when I clicked in my device manager, under DVD ROM, I saw a bunch of script gibberish with a yellow exclamation point, but the same thing was happening. Y at - it someone who had that same kind of experience and solved. Will you please help me to solve my problem. I want to upgrade to Vista.

    Thank you.

    Try to remove the CD/DVD filters in the registry.
    When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

    (1) run Regedit (start-> Run-> Regedit)
    2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

    This utility can remove the filters for you:
    http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

    If it still does not respond, you may need to replace the DVD drive

  • WLAN file Device Manager, until I restart the machine and deletes the wifi while using it 3 times a week and no diagnosis to see where is the problem

    I think someone put the wrong card in this or changed when I bought it was 3 weeks ago. dw1510 card wlan and broadcom driver date tried 2008 update and does not say supported.makes no sense not supported. Why wifi falls and have to restart are beyond me. I ask those with same past answer questions and if your card is different from dw1510 tell me your card. LAN hardware card. AND WHEN I TRY TO INSTALL THE DRIVER FROM DELLS FOR HIM, IT SAYS HARDWARE NOT SUPPORTED. GO FIGURE?

    Hello

    Welcome to the Microsoft community.

    I understand that you have a problem with WLAN.

    To help you better I would like to know the details below.

    1. What is the brand and model of the computer and the Wi - Fi router?
    2. You get no matter what code/error message when disconnecting a Wi - Fi connection? If Yes, then give the complete error message/code.
    3. You did changes to the computer before the show?

    I ask you to perform the following steps of the Microsoft Help article and check if it helps.

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Meet us with results to help you best.

  • Re: Satellite U400 - LAN card are not not in Device Manager

    Hello

    I never used to connect to the local network via an ethernet cable on my laptop because I aways used a wireless connection.

    Today I plugged in the ethernet cable and windows were not detected. And when I open the login window, there is only PAN connection bluetooth and Wi - Fi
    ([see photo | http://img15.imageshack.us/i/digitalizovaq.jpg/])

    So, I thought that the pilot was missing. Then I reinstalled the drivers from the website of Toshiba for LAN. drivers do not have helped me.
    When I look in Device Manager, I can not find my LAN card. It does not appear there. Only bluetooth PAN network card and wireless network card.
    ([see photo | http://img18.imageshack.us/i/digitalizova.jpg/])

    Any ideas how to fix?

    Hello!

    I don't know m but on some BIOS you can enable/disable the network adapter. Did you check that?
    In addition I recommend you load the default settings in the BIOS. Maybe it works.

    And have you ever tried a BIOS update? You can find it on the Toshiba site.

    In the worst case, it s a hardware malfunction of the NIC or motherboard and must be replaced :(

  • Satellite P200 (PSPB6E) - DVD listed as unknown in Device Manager

    The laptop loses DVD whenever I have laptop shutdown.

    Can operate again after that withdrawals upper filters in the registry, but is listed in the device as unknown Manager then does not yet work with an error code 10.
    Any ideas on this one?

    Hello!

    This boyfriend strange s, your drive is may be defective?

    Have you ever tried to remove the drive from Device Manager CD/DVD? After this restart the laptop and your drive should appear correctly. Check this box!

    What OS do you have? You have installed the latest service pack?

    Good bye

  • Satellite Pro L300-1FL - WLAN network adapter does not exist

    Model: Satellite Pro L300-1FL (PSLB9E)
    Operating system: XP Pro SP2
    Wireless card: PA3616u-1mpc (atheros AR5007)

    the laptop came with pre-installed vista, everything worked very well (including wireless), although a little slowly, but decided to downgrade to xp. integrated SATA drivers into my xp with nlite installation disc. XP installed fine. visited the toshiba support site and downloaded all the drivers for xp and install.

    Despite the installation of the wireless driver there is still no present in the wireless network card device driver. It is an "unknown" device listed, which I think is the wireless card.

    at first I was not sure what card appeared so systematically installed that all options of wlan of the toshiba download page [intel/atheros/realtek], none has worked. little more digging autour and discovery was a then reinstalled atheros atheros wlan client on the toshiba site. still did not work. found a update atheros ar5007 driver installed, still no joy.

    forward wireless switch is on [the orange light] and has been throughout the process. have you tried enabling / disabling fn + F8, which doesn't do anything.

    I think I read somewhere (having read much too many post on this over the last few days!) that update the BIOS to version 2.4 can solve the problem. However the version offered for my model by the toshiba page BIOS update is 2.1 (which I've updated when you install all drivers in xp) and I'm not that eager to update the BIOS to a version that is not supported by toshiba, because I have no idea how fix an incorrect BIOS prevents starting the computer.

    When you look at the BIOS option "wake we wireless" is grayed out and not selectable. There is no other network without wire/related parameters. This might infer that the BIOS does not recognize the card wireless for some reason any. whereas he should have before, I started to lose its time, as worked it fine under vista wireless. so I think that upgrading the BIOS might have broken, although I can't be sure that I've updated the BIOS until I realize that the without wire did not work under XP, so it could have been broken before the BIOS update. Does this sound plausible? also, I have no idea how if is take to solve this - you can downgrade the BIOS?

    any help greatly appreciated - have been pulling on my hair for 2 days now and there is only so much googling, you can do before find yourself you constantly re - visiting the same sites over and over again!

    Thank you

    ~ andy

    worried that he may have been conflict for different drivers wlan I had initially installed, so have done a complete re - format and re-installation of xp. Install the drivers, including the wlan driver atheros. but still no adapter wlan in Device Manager.

    the unknown device in the other section of the Device Manager is listed as an ethernet controller; However glancing upward from the PCI/VEN # (C & DEV_001C 168) on the basis of data from the provider PCI identifies that this is indeed the atheros card.

    This means that it is not a hardware/BIOS problem as I previously suspected. XP can 'see' the device, but for some reason, the driver won't work. Hmm

    someone at - it had a similar problem? is it just a matter of finding the "correct" driver

    Thank you

    ~ a

  • Satellite A350 is no longer able to use the WLan

    Hello guys,.

    so... I started using Bluetooth earlier, use of the Internet via a cable... Today I tried to use my WLan again, but it did not work (worked well before).
    So I tried to activate it via FN + F8, but all I can see is activate Bluetooth, one for the WLan disappeared?
    The WiFi light only blinks when Bluetooth is activated. I would rather turn off Bluetooth that not being able to use the WLan.

    I think it's a similar problem
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67514&TSTART=0
    but I really didn't want to install a bad driver or anything like that.

    I use a 32-bit Vista and my PC-Tool says that I use these networks currently (I just copy and pasted because honestly, I have no idea, hahaha).
    Realtek RTL8102E Family PCI - E Fast Ethernet NIC (NDIS 6.0) Version = 6.208.729.2008 MAC address = 00:23:5 A: 05:61:05
    Intel(r) WiFi Link 5100 AGN Version = 12.2.0.11 MAC address = 00:21:5 D: 62:D8:1 C

    I would be so happy if someone could help me fix the problem anytime soon, because I really need wireless capability soon. Thanks :)

    Former Satellite A350 was delivered origin with Vista OS, so at first I would like to know if you use original recovery image (OS) that you got with your laptop.
    If I understand you good WLAN card is installed and registered properly in Device Manager. Can you confirm this?

    I have Satellite A300 and a friend of my A350 but WLAn works properly on both machines so I m a bit confused why the WLAN option is missing when you use the FN + F8 key combination.
    I m wondering why WLAN is detected by the system but ignored by the utility of flash cards.

    I'm don't know if this will help, but try to follow:
    Enter the BIOS and set it to default settings
    Reseat the wireless network card.
    Reinstall the extra value package, and check again.

    If the problem persists after doing all this, you have to do a final check and reinstall the OS using original recovery image that you got with your laptop. It's a way more radical, but certainly more efficient to solve a software problem.

  • Satellite A200 - new card Wlan (Intel 5300) = Wlan led is always OFF

    Hello world

    I have recentlly bought a new card WLAN Intel 5300 (533AN_MMW) for my Satellite A200 - 1 CG (PSAE3E...). I installed a new card without any problems, downloaded and installed new drivers (Win7) also.
    The problem is that the Wlan led does not illuminate any. So I don't see the card functions normally in the Device Manager, but cannot establish a wireless connection because the Device Manager indicates that the WLAN switch is turned off.

    Help!

    Kind regards
    Igor

    Dear Igor

    Can you please tell us what A200 you exactly (A200-xxx) so that we can check the Toshiba for Win7 download page?

Maybe you are looking for

  • How can I disable "click here to start to share on Google +" using xp and firefox?

    My home page is google. I want to disable the start bar that says "click here to start to share on Google +". I use windows xp.

  • Toshiba Canvio single 2 TB external hard drives

    I purchased 2 Toshiba Canvio Simple 2 TB external hard drives (there is a 2 weeks and last week one - same products). I found a disk hard fact "beep" sound sometimes (not always) when it is connected to the computer, but the other a dose not make any

  • B40-30 screen fades on W10 when the power cable is plugged

    Hi all!Couple B40-30 weeks bought it y a. upgrade to Windows Home 64-bit 10, then did a clean install of W10. Installed all the drivers required from the Lenovo site.After that (I don't remember what it was like before the clean install) I faced the

  • Windows 7 - error Code: 80072EFD (cannot install updates)

    Hello, I m using windows7 family Basic for mobile dello I licensed virson but still I can't get the windows update & I door error code 80072efd, so please help me to solve this problem.

  • VCS commands

    Hello Is it possible to configure a VCS using a configuration script that will be put in SSH? I know that you can make a model through TMS. But I want to configure it with CLI commands. So I would put Xconf commands in a list. This will then put in v