Satellite A350D - 20K does the built-in 3G modem support?

Similar Questions

• Satellite A350D - 20K - Touchpad does not

  Hello Madam / Sir:

  Please give me a way on how can I fix my laptop problem. I use Toshiba Satellite A350D - 20 k, its original operating system was Vista 32 bit. As I discovered that my machine has been supported to use Windos 7, I decided to change my OS to Windows 7 64 bit. When the first time I've used it using Windows 7 OS my touchpad worked again.

  But change a BONE I have to find the driver, so I was looking for your www.computers.toshiba-europe.com site, so I found the latest updates for family series specifically A350D but not A350D - 20K I can't find this exact model updates up-to-date, so the updates of the A350D I saw, I downloaded all of them even the update of the BIOS...

  Before that I use version 1.2 of the BIOS, but since I saw a latest version which is version 1.7, I decided to install it. After that I installed it I noticed that time if my touchpad does not work because I use a mouse (external device), maybe that I installed it Wednesday, October 6. For some time, when I take my mouse when I tried to use the touchpad, that was the time I noticed that it does not work.
  I don't know if my bios version change has been the one who made this problem.

  I asked some recommended to my friends and they asked me to the Toshiba site, if there is a BIOS utility crush so that you can restore your previous BIOS or if they still have the old version of your BIOS which is 1.2.

  So now please dear I sincerely ask a help for my problem. Thanks a lot for your time in reading my concern.

  Edit:
  In addition, I already recover my lap top using may but recovery disk, it does not solve my problem, my touchpad still didn't work. My drivers in Device Manager is over. The driver installed in my device manager is

  * mouse and other pointing devices *.
  Compatible mouse HID
  Synaptics PS/2 Port TouchPad

  Hello

  Satellite A350D - 20K belongs to the series PSALME. According to the Web of Toshiba BIOS update site that you can find for A350D (version 1.70 - WIN) is compatible with all models A350D so I guess that the BIOS update isn't the cause of the problem. As a general rule after a BIOS updated you must load the defaults in the BIOS if you press the F9 key in the BIOS Setup. This will load the default settings.
  Also, make sure that the internal pointing device (touchpad) is not disabled in the BIOS. On some laptops you can disable it in the BIOS and it must be set to activate.

  After the installation of recovery also try the FN + F9 key combination. With this combination of keys you can also turn off/turn on the touchpad.

  Check this box!

• Updated by Satellite A350D - 20K for Win8 - necessary display driver

  I have a Toshiba laptop

  model:
  Satellite
  A series
  Model: A350D - 20K
  Part number: PSALME - 01D003DU

  You can check can model here---> http://icecat.biz/hr/p/toshiba/psalme-01d003du/prijenosna-ra-unala-4026203675308-satellite-a350d-20k-2113599.html

  My problem is on my display driver, because I discovered that ATI has no update for the 4000 series and below, and I use 3000 series on my machine...

  Can someone help me please? I really want to improve my OS to win8? should I continue the upgrade? According to me, my cell phone features are good for the minimum requirements to upgrade to win8, but I couldn't find the part number on the list provided by Toshiba for laptops which is expandable to win8...

  Thank you guys...

  I put t know how to help. Toshiba doesn't support this old Satellite for Win8 and hardware manufacturer doesn't support graphics card too.
  If something exists doesn t how do you find it for you.

  I have Satellite A300 and I agreed that Win7 is the limit for this machine. It works perfectly and it's OK.
  WIN8 is the new generation and of course we need better and more recent material for it.

• Satellite A350D - 20K - need Toshiba Recovery Disc Creator for Win7

  Guys I'm on Satellite A350D - 20K

  before or the original operating system from my laptop has been * Win Vista 32 bit * but I have choose changed from * Win7 64 bit *...
  I have already downloaded the other drivers from this site for my new OS, but it is not complete, in any case, this isn't a big deal.

  I just want to have an installer for * Toshiba Recovery Disc Creator for win7 64 bit *.
  before on my win7 32 bit there is a Toshiba Recovery Disc Creator ("but it doesn't have an installer on my backup CD I do not know why?")

  I looked for an installer here but the only thing I saw was for Win Vista, I tried to install it luckily it has been done successfully. He invited s to restart, so I restart my laptop so I tried to open the application, but there was an error message that invites it goes like this

  "NO HDD RECOVERY AREA!
  "The Toshiba Recovery disc can not be started."

  CONCERNS:

  * I want to ask you guys if you have an idea why it goes like that?
  * You have an idea where I can get the good installer for my new OS

  Please GUYS I NEED YOUR URGENT help BECAUSE I want TO SAVE FIRST MY drive HARD BEFORE I'll install new applications or before so I will use it.

  Thank you good guys...

  Hello

  Toshiba Recovery Disc Creator is a tool of Toshiba that created the recovery disk available on HARD drive recovery image.
  It s NOT support tool like Ghost, etc. that allows you to create an image of your operating system preinstalled.
  If the Toshiba Recovery files are not available on the HARD drive then the Toshiba Recovery Disc Creator will not work!

  Welcome them

• Satellite A350D-113 - how the BIOS recovery after faulty update?

  Hi guys!

  Yesterday I stumbled accidentally updating BIOS for my satellite A350D-113 and computer interference in the process. Now, I've got is this common black screen, fan turns and CD-rom checked.
  I know there are discussions on this issue, but all of these senses are very different. Can someone help me with step by step "what to do"?
  I did not usb floppy, but I suppose a common CD - R should be fine replacement.

  I'm desperate rly.
  Thanks in advance.

  Hey Buddy,

  If the BIOS update failed, you can do anything. You need professional help of an authorized service provider. Technicians can try to reflash the ROM module

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite A350D - 20K - what is fingerprint utility and registry patch?

  I use Satellite A350D-2Ok. Its operating system was originally Vista 32 bit, I change to Windows 7 64 bit, I tried drivers for Windows 7 64 bit here. Then I saw a driver or installer for finger utility to print so I was confused if what is for? I downloaded and installed, but I don't see any new installed application or software in my laptop? I also checked it on C:/programfiles Strawberry I was still seeing it...

  You guys can tell me what is this installer for? What is the use at all on this issue or it how it works in short.

  Second thing is I've seen also registry patch in the list I have also download. What is the registry patch for and when should I use?

  Thanks in advance

  Hello

  1 fingerprint utility
  I think even says it all if your laptop is a fingerprint reader you need of this tool/driver to use. Otherwise you don t need. ;)
  In general fingerprint reader and the utility can be used to replace the Windows login password. You can use your finger to login to Windows if you have the fingerprint reader.

  2 registry patch
  Everything about these patches you can find on the driver on Toshiba page Details:
  Registry patch 1.0 description: Storage Configuration Patch
  Description of the patch 1.0 registry: registry Patch to devices and printers

• Satellite A350D - 20K - Question about upgrade second HDD + Temperature

  I have a question about my laptop. I have notticed it is a second location of HARD disk on the bottom.
  Is it possible to use this to increase my storage?
  And if yes, how do I do that? I don't see all the connectors.
  What type of HARD drive to use in case it is possible to use this slot machine?

  My second question is on my laptop to be very hot after a short period of use.
  I installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees.
  He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  This does not seem normal to me. I tried to clean the vents with compressed air, but it has not made a difference.
  I searched on the internet how to take the laptop part for proparly cleaned TI.
  But I can't so I'm looking that destroy it.

  This could be the cause and more importantly, how can I solve this problem?

  Tom

  The second HARD drive bay contains the HARD drive connectors?
  If Yes, then you can use a SATA 2.5 HARD.
  If there are no connectors, then you will not be able to use the second HARD drive

  > I have installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees. He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.

  CPU and GPU produce a lot of heat. The heat dissipation is always created then there s nothing unusual that the temperature rose to higher level.
  You can change the settings in Win 7 power management. You can set the CPU to lower performance and can increase the activity of fan, which will help lower the temperature.

• Satellite A350D - 20K - FN keys not working is not Windows 7

  Hello

  I'm having a problem with my laptop, the fn keys do not work.
  I had this problem before, but when I reinstalled Windows 7 they worked again. Unfortunately after a few updates I had the same problems as before.
  I think it is really annoying, because now I have to go to the taskbar to darken my screen for example.

  I tried reinstalling the drivers, but they did not work.
  Does anyone knows how to fix this?

  Thanks in advance,

  BALCO

  Have you tried to delete preinstalled Toshiba value added Package and install the latest version of the Toshiba download page?

• The built-in ftp host support does not work

  When I use this solution in muse all files aren't upploaded or incompatible. When I save as HTML to upload files by third party FTP-client, it still works.

  The problem only occurs with one of my sites.

  Muse has a working directory which is maybe corrupted?

  In your FTP configuration section to remove a bar oblique in the zone root directory, if it exists. It worked for me.

• AC100 sees the built in 3G modem after update to kernel 2.2

  Hello everyone!

  Does anyone have a solution for this problem?

  I got the AC100-10V for a few months and everything worked fine until I updated via station served Android 2.2.
  Now there's * no sign * 3G construction no modem in the system. * I can t he use anymore.*
  * All entries in the menu about this feature and also the icon for mobile networks have disappeared! *

  What can I do to get it working again?

  Please help me!

  There is no problem with my AC100-10V after update - 3 G works as expected.
  Have you tried to reset the device? (Reset)
  Consider finding a Toshiba service and bring it back under warranty.

• Satellite U300 connected to the TV - video format not supported

  I am using Toshiba Satellite U300-15 q and it has a vga output, so I bought a cable and a box that transfers analog signal to VGA to hdmi digital so that I can connect to my Sony TV are 32 '.

  But if I connect it it says on the tv in video format not supported in yellow letters.
  Why is this and how do I solve this problem?

  Throughout history the problem is you are using third party hardware or software so described this issue has nothing to do with your laptop computer Toshiba or Toshiba in general.

  On the mobile side is important, the video signal is sent to the right path. What will afterwards and why this signal is not transformed correctly falls within this box.
  What box are you using?

  In my opinion you should contact the manufacturer of this box and their support. They should know how it works and how to solve this problem.
  In General, Toshiba has nothing to do with this problem.

• How to enable the built-in graphics card support?

  I have touchsmart 520 and wanted to know if there is an option of activation of the integrated graphic card support instead of use the graphics card?

  I think the card is defective and need to find a way to check if this Yes.

  Thank you

  Roye

  What are the symptoms that you see?

  What is the full product name or product number?

  Somewhere there is a serial number on the PC all-in-one.

  This will depend on the motherboard is installed.

  There is an option in some motherboard BIOS installed (Lavaca motherboard) which allows you to select the Intel HD graphics card.

  

  With the card mother angelino2, you will need to remove the MXM card to see if this allows the embedded video.

  

  What is the installed OS and CPU?

• Re: Satellite A350D-114 - how to change the display resolution?

  Hello

  I have Toshiba Satellite A350d 114. The screen resolution is 1366 x 768.
  But I want to change for example 1280 x 1024, but I can't.
  I wish I had a longer high reolution (768 above).
  What should I do for this?

  Thanks for the replies.

  Piotr

  Vasja is right. You should offer more information.
  When you buy laptop and use it with the settings of the right display driver is pre-installed and the resolution of the screen on the right will be defined by default.

  So the question is: what you do or what you've done with your laptop? with the right display driver, you should be able to use the waterproof display resolution.

• Chicony Webcam does not not on Satellite A350d Pro-202

  Specification of the system:

  Satellite a350d-202 Pro
  Windows 7 64 bit

  I don't know if this is related but since I updated my laptop to Windows 7 my Chicony Webcam has stopped working. I tried all of the following conditions:
  Complete refurbishment of my system from scratch.
  + Failed +.

  Safe installation Mode drivier
  + For some reason, it doesn't let me connect through safe mode. I get to the windows login screen and it restarts automatically after a few seconds. No explanation? Yet once again, rebuilt PC a few times. +

  No webcam feature in Control Panel and of printers or of equipment devices.
  + Does not manually install drivers such as recommended. I do not see the webcam being recognized.

  Half of closing the lid of the portable computer to hear it recognizing the camera or the new device.
  + Without success. This does not happen.

  Essentially, I want to know if it is a problem of compatibility of Windows 7 or a technical fault to Toshiba.

  Anyway something OFFICIAL from Toshiba would be key here I was using the webcam for Web conferencing vital for work and now I can't.

  Please provide any option or anything else I can try.

  Suggestions of a value deeply. Including links, or other items, I may have missed

  Desperate to see a solution.

  Concerning

  Danny

  > No webcam feature in Control Panel and of printers or of equipment devices.
  Manual install as recommended drivers does not work. I am not recognised webcam

  The Chicony webcam must be listed in the device under the devices of Imagine option Manager. You should see entry USB video device.
  Who do you see?
  If so, this delete in Device Manager and reboot the device.

  Usually the Windows 7 should automatically recognize the cam and refresh the driver.
  Is this the case?

• Satellite A665-14F - IR Transmitter built-in Nvidia 3D does not

  Hey all

  I desperately need help

  I just bought a new laptop Toshiba Satellite A665-14F. the computer looks and feels well except for a big problem. Just NOT in 3D!
  I googled the topic, but no real help.

  I just opened the box, completed the installation start-up and is go to the Nvidia Control Panel to enable the stereoscopic 3D feature, it just launched the 3D Vision Assistant who asked me to choose a type of configuration to use. I took the first (with transmitter IR USB 3D glasses) and then choose. In the next screen, that it says connect the USB transmitter and press; My only problem is the A665-14f does not come with a USB external transmitter, but rather a transmitter integrated display on the right side of the Web cam so I have nothing to connect to USB, and certainly not on vision 3D button. The next button is grayed until I connect and press a
  button what I simply do not have?

  I've upgraded to the new Nvidia 270.61 driver but still and always the same. The wizard is just waiting for a USB dongle with a button and green LIGHT to go and activate the 3D Vision. After a search very thorough documentation of Toshiba they just say a very ambiguous manner that he should see the built in transmitter and the Nivida driver documentation says that it supports the built in the transmitter, in fact, I think that the driver is installed successfully for the status screen that appears after installation.

  PLEASE HELP :( I felt in love with this laptop that has everything I wanted in a laptop but missed in the 3D part. I am running Windows Home Premium 64-bit edition came with the laptop and I have not installed anything on it yet or even used. I was so excited to test the 3D and missed him so I need any hint on how to get this integrated transmitter works.

  Thank you in advance.

  Post edited by: moh777

  I think you just need to wear 3D glasses in front of the laptop for the infrared transmitter work.

  You have fully charged the glasses?

  Also download and install the latest package of nVidia Driver from the Toshiba site (not the site of nvidia). There is a new revision.