Satellite A40-231: SD-R6112 will not read the DVDs I burned
I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?
Hello
@Magnus:
Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
In addition, this burning program did you use?
I use Nero. Form is the program better combustion and I never had a problem.
What you need to do is to test several DVDs. not all media work on the disc.
Tags: Toshiba
Similar Questions
-
Satellite M30X: reader will not read the DVD-R data but plays movies in DVD-R and CD
I have a Toshiba M30X with combi DVD/CDRW drive.
I have accumulated 12 GB of digital photo I wanted to erase but do not want the number of CDs that can be the so I bought an external DVD LITEON EZ - DUB and made 3 DVD - R burner of plenty of JPEG.
However, when I put the DVD in the drive of Toshiba combi, it clicks for a moment or two, but when I click on the combi drive in my computer, the folder is empty and it is said there are 0 bytes.
CD of still works, audio and data, DVD movies fine, reading DVD-R on my Pioneer DVD recorder (for TV - looks like a video/nothing to do with PC) plays very well, but he won't recognise DVD - r with data (JPEG or MP3) on them.It makes no difference what software was used (Nero 6.6) and LITEON EZDUB and it's okay if the discs are completed, a single session, multi session or what - it will not play any of them.
However, these discs work perfectly in my old office to 7 years with a Sony DVD/CDRW combination of 4 years.
I'm puzzled.
I don't particularly want to reinstall windows, in the case where it does not recognize the recovery DVDs and I remember Microsoft a Note having activated by phone with a code that is different every time you ask him to generate a.
It's a bit of pain that I wanted to make my pictures with me in my laptop bag.
I won't be carting around an external DVD burner just to read the DVD.
I've updated the firmware for SD - R 2512.
He had no other effect freeze on a black screen on restart - I had to hold down the switch 15 minutes in this State.
The laptop is 1 year and 26 days if that counts for anything.Anyone have any ideas? Or can I just put up with him.
Hello
Well, I can only make suggestions.
You are able to place files many MP3 and Jpeg on DVD.
This is perhaps a reason why Explorer cannot handle the DVD.Try to burn the DVD with photo JEPG, but do not have the full DVD with these files.
You must leave a free space on the media. Maybe it helps.But it's very strange for me and it's just a suggestion. I've never tired it and don't know if it helps.
I had a similar problem on my laptop but I solved using compatible media. Some readers prefer different media for different types of files. -
Windows Media Player XP Professional will not read the DVD.
I can't get my Windows Media Player XP Professional to play DVDs. The system is only a couple of years and it used to read discs, but for several months, it is no longer made. WMP keeps my music library and can play these songs without problem, but it will not play a DVD. Why is this the case and I need to do about it?
Robert
I can't get my Windows Media Player XP Professional to play DVDs. The system is only a couple of years and it used to read discs, but for several months, it is no longer made. WMP keeps my music library and can play these songs without problem, but it will not play a DVD. Why is this the case and I need to do about it?
Robert
=====================================
You may have a problem with the hardware with the DVD drive...
If you have two DVD players... try this one.The following article is maybe worth a visit:
(314060) your CD or DVD drive is missing
or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060/en-usOr... maybe you need a DVD decoder:
(FWIW... it is always preferable, if you create a system restore
point before installing any software or updates)Info about DVD decoders:
Plug-ins for Windows Media Player
http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspxAnd you should be able to read your DVD with the
free VLC Media Player:VLC Media Player
http://www.videolan.org/Might be interesting to try to download and install the
following codec pack:* Proceed at your own risk *.
CCCP (combined Community Codec Pack)
http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
(FWIW... it is always preferable, if you create a system restore
point before installing any software or updates)
John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *. -
My E drive will not read the DVD-RW/DVD-ROM
So here is the problem
I have a vista Home premium 32-bit with sp1 computer laptop
who will not read DVDs or games that are in DVD-ROM format (specifically, the game command andConquer 3: Tiberium Wars)
but it will read the games more alumni who are PC - CD (such as Command and Conquer: Generals) well it will nt installs successfullyI tried to clean my computer and reinstall using operaing system came with my laptop drive, but the drive E may not even read that
the CD turns, stops, turns, makes a strong ' loading ', but stops then
nothing happenes
I restart my PC with the CD in there because he says I'm supposed to o, but nothing happens, my restartes just PC normallyHelp, please
Hello, tyINtrouble
The device is listed as a DVD player?
You can check by clicking on start, click computer, and to check the label of the hard drive, he may mention DVD or DVD - RW etc.
You can also check your connections are secure.
If possible, you can try to test the drive in another machine, or another drive in your computer to see if it works properly.
If your hard drive and DVD/CD player are on the same parallel cable connection, it can cause problems as well.
We can't wait to hear back on your part.
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Nothing will not read the DVD/RW
I have a desktop gateway DX430S with windows vista Home premium 32-bit. The DVD/RW will be isn't anything read or burn CD when I go into Device Manager and check the driver, I get the following error message:
Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 37.
I tried to update the driver but it had no effect and uninstalling and restarting had no effect.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
CDDVD rom will not read the dvd rom or DVD
my cd/dvdwrighter reads only cd rom not my dvd rom or DVD
Hello
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014===========================================
This troubleshooting could not help if there is alignment and/or wear issues however it
a shot.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
New CS6 disk will not read the DVD ROM
I got CS6 on my laptop when I had WIN Vista, ive recently went to WIN 7 and I try to re install CS6, but now my dvd rom wont read any of the 3 discs of CS6. Ive tried a music disk and it reads that I see any scratches on any of the 3-disc accompanying the CS6.
I really don't think it's disks that play to the top, when I installed first CS6 they went from the cover to the right dvdrom in the covers. No errors come at all. I put the disc, the computer thinks for a few seconds then nothing.
Any ideas?
Have you tried to read what's on the disc to see if you can find the files that start the installation process?
Rather than using disks is to download the trial version and use, serial number you havce records to activate. Here are some links for downloading...
http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html
For what follows, remember to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.
CS6:
http://prodesigntools.com/Adobe-CS6-direct-download-links.html
-
DVD player on the desktop iMac 2009 will not read the dvd whats the fix
DVD player on the desktop iMac 2009 went to play DVDs on Yosemite. What is the solution?
The first thing to try is a disc cleaning disc. About US$ 5-15 in most computer, office supplies and electronic. Loading slot discs get pretty dirty and this dirt/dust can interfere with proper disc. The cleaning disc is an inexpensive and simple step that often solves the problem.
-
Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd
OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
This cannot be a hardware problem, it must be the software should not it?
Can anyone help?
Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
Unfortunately the computer is just out of warrantyHi Robert,.
Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.
I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.
Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.
Kind regards
-
USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.
It's a new 12 '' MacBook
-
Original title: no dvd
I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer
Hi Lesliestones,
· Did you do any change on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Method 2: You can run the fixit and check if it works.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
I hope this helps.
-
Help with my computer of dumping
I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?
If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.
-
E T5226 machine will not read the SD,.
E T5226 machine will not read the SD card, is there a driver for this problem? If I use a USB drive, the computer will read the card but when the SD reader support it don't read nor even appear in my computer screen.
Using Microsoft windows 7 UltimateHi Larry,
Thanks for posting your query in the Microsoft community!
I understand that this E T5226 machine won't read SD card. I will try to help you with this.
(1) did you make any changes before the show?
(2) you receive an error message/code?
1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager
i. click on start, type devmgmt.msc and then on enter.
II. research the name of the device
If the device is not detected in Device Manager, and check if it is the hidden device.
i. click on view under view hidden devices
II. develop all winks in Device Manager
III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works.
2. install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. check if it works.
Downloads & Documents - Support Desk / series T / T5226
http://support.gateway.com/us/en/EMAC/product/default.aspx?modelId=1626
Link: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Installing the driver in compatibility mode:
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
3. check with any other card SD one another if it is get recognized or detected or you can even check if the same SD card becomes recognized or detected on the other computer.
Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.
-
I am trying to download Adobe Acrobat 8 Professional on my PC, because the disk drive on my computer will not read the disc. How can I associate with this download?
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
LR4.0 will not read the traces for iPhone App "Traces GPS"
Hello
I tried to understand, looking at this forum and another search on Google, why LR4 import tracklogs from the iPhone App GPS tracks.
As far as I can tell, the tracklog information and format corect seems to me. Here is a sample of the app:
<? XML version = "1.0" encoding = "UTF-8"? >
< gpx version = "1.0".
Creator = "traces GPS - " http://highorderbit.com "
" xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "
" xmlns =" http://www.topografix.com/GPX/1/0 "
" xsi: schemaLocation =" http://www.topografix.com/GPX/1/0 http://www.topografix.com/GPX/1/0/gpx.xsd' > .
< time > 2012-03-18T 23: 20:59Z < / time >
< trk >
< name > Track Log 2 < / name >
< number > 1 < / number >
< trkseg >
< trkpt lat = '+ 48.473296' lon = "-68.429246" >
< model > + 65.511414 < / ele >
< time > 2012-03-18T 23: 20:13Z < / time >
< / trkpt >
< trkpt lat = '+ 48.473379' lon = "-68.429238" >
< model > + 63.738411 < / ele >
< time > 2012-03-18T 23: 20:15Z < / time >
< / trkpt >
< / trkseg >
< / trk >
< / gpx >
Any idea?
Thank you
Steve,
The problem with the tracklog is the '+' in the specifications of the latitude. Remove the brands '+' the legible tracklog. Now, I'm not sure if a '+' is valid or not (http://developer.garmin.com/schemas/gpx/1.0/oxygen/index.html_h882410155.html), but for this time Jeffrey Geoencoding Plugin will not read the tracklog...
Beat
Maybe you are looking for
-
I wish I could search my emails stating the dates between which the enamel can be?
Is it planned no feature or an existing add-on allowing research in emails BETWEEN TWO DATES? It would be extremely useful for those who have a lot of emails. Thank you.
-
In iTunes 12, which I've just started using, the drop-down list selection "View As... "in the menu at the top of the screen display is set to"Playlists", which opens my (understandable) playlists in Playlist view. But if I want individual songs, I d
-
Build-Fehler. Fehler 1 (im accordingly mit einkommendem path?)
Hallo! ALS ich ein .exe von meinem VI machen wanted ich auf ein bad sharp Fehlermeldung kriegte: --------------------------------------------Fehler 1 ist bei Methodenknoten in AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Bui
-
How can I fix his destorted during playback of streaming videos?
About three weeks, I noticed that when I play online videos, the sound sounds horribly distorted. I don't know even how to describe. It is resonant and to street light. I called my DSL provider and they said that the internet connection is fine. They
-
I tried for weeks, I downloaded the software 25 times, I wnet online to download from CAD, without success. When I try to print something, I had the impression of e, but no preview only and not print. What should I do?