Satellite A40: How to boot from an external USB device?

Similar Questions

• Portege Z930 - impossible to boot from the external USB CD/DVD drive

  I have a portege Z930 14U
  I am not able to boot from an external linke (Samsun SE-218) CD player via USB

  I already set the boot sequence and choosed CSM as model BIOS

  Thank you
  Andrea

  Try disabling secure boot in the BIOS too.
  Then connect the CD/DVD from the laptop drive and switch on the device.
  Press F12 and choose from the menu to boot from the USB device

• Dell Latitude 10 ST2e compressed can not boot from an external USB optical drive

  Dell Latitude 10 ST2e compressed can not boot from an external optical drive USB (CD/DVD)

  The BIOS has no setting for it. It will boot from a flash drive. I would like to boot from my CD of 2013 Acronis Recovery Console.  Anyone have any success to boot from a CD/DVD USB drive?

  Yes, there is a way to do this.

  I just did this to install Windows 10 from a DVD on a tablet of 10 Latitude by following these steps:
  (Note: my version of BIOS is A08)

  1. turn off the 10 latitude power.
  2. attach a USB hub to the USB slot unique on the side of the tablet.
  3. fix a keyboard and an external USB CD drive to the USB hub.
  4. now press the button down on the side of the Tablet and simultaneously press the power button for 5 seconds (until see you the screen light up, but will be weak against black unlit).
  5. When you see the Dell logo, start typing on the F12 key (the lower right corner shows the option press the F12 key to choose single startup options)
  6. now start choosing appear with many options to choose from, including my CD/DVD drive.

  Hope it will be useful to you.

• How to boot from an external device?

  Boot CD and USB keys start which started as planned on my old laptop HP DV71135nr are not DΘmarrer on my computer laptop month old HP 15-F039wm (Win8.1). I see that the BIOS is separated into legacy and UEFI sections, but none of the settings I have tried will allow any external drive start. This configuration setting I missed? Thank you.

  Hello

  You will need to disable secure boot and then activate the mode in the BIOS...

  These instructions should help:

  Impossible to boot from a Bootable CD or a portable computer DVD

  Secure boot (Windows 8)

• T430s: boot from an external USB DVD drive

  I wanted to change the boot sequence to boot from external DVD drive to install Win8. To access the BIOS I hit Enter (empty password I guess) but in the BIOS everything is grey: I can't make changes. What is going on?

  @kaja69...

  Rich said, you have a set supervisor password and Jin Li said, there is no default password.

  For more information on the different passwords at the BIOS level, please consult your T430s Hardware Maintenance Manual (manuals pages 36-38).

  By Community rules, discussion of passwords is a sensitive area and can risk one slows down, so please keep that in mind if/as this discussion progresses.

  Kind regards.

• Boot from an external USB drive

  I have a D630 new that I use to replace my old D600.  I like the installation I've had on the D600 so I want to keep the hard drive in a USB/Firewire external enclosure and the boot of him when I need to access the drives and the code that I had, but without the drive to my D630 cloning.

  I have reset the options start, installs the USB first on the startup list, and he tried to boot from it.  Blue screen of death... that have not seen in a while.

  The external drive is Parallel ATA via a USB port and the new D630 is SATA.  I think that it shouldn't make a difference unless the BIOS it expects.

  Does anyone have thoughts on what I should look at?

  
  

• Satellite M30X-129 loses connectivity with the external USB device

  I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

  Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

  If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

  I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
  Thank you
  Abderrahman

  Hello

  This happens also with the external USB mouse?
  This occurs if the power adapter is plugged or only if the laptop running on battery?

  In-hubs properties > Device Manager USB root-> power management
  You will find the option called allow the computer to turn off this device to save power.

  I would recommend the brand and disable this option.

  Maybe it helps.

  By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?

• Satellite 2400: How to boot from the CD-ROM PCMCIA?

  Dear all,

  I try to start from the PCMCIA - CD ROM because my DVD-ROM is not working. After you press the power and press F12, I chose PCMCIA but nothing happens. should I change something in the BIOS first?

  My laptop is Satellite 2400.

  Thank you...

  Hello

  I got this Toshiba FAQ document on the startup form of the PCMCIA reader.
  http://support.toshiba-tro.de/KB0/FAQ35005G002KR01.htm
  This article describes a seed on a protected unit but it s useful and you should check it out.

  In addition, you can check in the BIOS the option PC card. Try to change the mode of the CCIP Compatible controller or CardBus/16 bit and tries to start again the PCMCIA card.
  To change these settings, first change the configuration of device for all devices

• Throughout the year the iMac Intel and models boot from an external USB disk?

  ?

  Trying to help a post here it is in a jam and I'm trying him on a path of least resistance to cure its ills.

  Do every year Intel iMac and models able to boot a USB external hard drive?

  Here is the message for those who are curious.

  It is in a real bind.

  HELP... lost my businesses together work of the reader

  Thanks for any idea.

  Yes. Click here for more information.

  (142246)

• Portege R100 - boot from the external HARD drive

  I have a Portege R100 and the HARD drive has failed. I installed a new HARD drive and I have the Toshiba recovery disks. I tried to boot from a generic USB CD-ROM but the laptop did not recognize.

  I have a disk of Toshiba USB drive it does not recognize and I have a restore disc but I don't know how from there. Do I have to buy a CD external Toshiba and if so, which?
  Any useful suggestions?

  Hello

  Boot from the external USB CD/DVD drive is not possible.
  You will also be able to boot from USB HDD!

  If you want to boot from the CD, you must use a compatible PCMCIA cards (16-bit and 32-bit Cardbus) CD/DVD drive.

  For more information, see this article from Toshiba:
  http://support.toshiba-tro.de/KB0/TSB5100S70004R01.htm

  and this other thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=97343𗰿
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8991&MessageID=31246

  Good bye

• Satellite A100-906 cannot boot from CD

  Hello

  I have Satellite A100-906 and can not boot from the CD. I have not now what problem.

  I want recovery my pc, but do not boot cd and I tried another CD of Windows and seems to be a problem.

  I get a DVD Super Multi drive _usb_ but does not have same problem.

  BIOS tool is default.

  Please FEM answer me

  thanx

  Hello

  You said that you are using a USB DVD Super Multi Player?

  Sorry, buddy, but I think that you will not be able to boot from the external USB CD/DVD drive
  AFAIK BIOS doesn t support this!

  You must use the use of the internal CD/DVD drive if you want to boot from the disk!

  Welcome them

• OS to boot from the external drive

  So I searched high and low, and I don't know if the Toshiba Satillite are able to start an operating system on an external hard drive. I discovered that there are portable computers that can do but their BIOS must beable to do. If Toshiba laptops can do those who can?

  Hello

  As far as I know it of not possible to boot from the external USB HDD.
  I found several postings on similar themes and it seems that it is only possible to boot from the external USB FDD, HDD, ODD and LAN are sometimes also PCMCIA card.

• I can't boot from disk external HARD - Tecra M5

  Hey guys,.

  I tried to start my Tecra M5 from disc external HARD with a clone of my hard drive but it does not work.

  Maybe you can give me some advice for this problem.

  with greetings

  Hello

  > Maybe you can give me some advice for this problem.
  This isn't a problem! It's just not possible!
  Regarding a I know that it of not possible to boot from the external USB HDD

  You can boot from these devices:
  USB FDD, disk HARD primary, SelectBay devices, Network (LAN), SD-CARD

  Good bye

• How to boot from simulated USB (flash drive) mass storage device?

  I do some development work on the anaconda, the Installer used by Red Hat Enterprise Linux and reconstructions based off of him.  I'm testing support of USB flash drive facilities and would rather test my changes using image files from a USB drive physical - a bit like editing an .iso image to a CD instead of using a physical CD of closure.

  I found a reference to the Framework of Linux-USB Gadget API, which looked exactly like what I was looking for.  After the reconstruction of the almond, I was able to run:

  • modprobe dummy_hcd
  • modprobe g_file_storage file = CentOS - 6.2 - i386 - netinstall.iso

  After that, the office immediately get the image as if I had actually plugged a USB stick with the same content.

  I am also able to connect this virtual USB device to a virtual machine, but when I start the virtual machine, it has no option to boot from the virtual USB device.

  Any ideas?

  VMware Workstation does not directly support boot from USB but you can use a third-party utility called Plop Boot Manager to boot a bootable USB disk and you may be.

• SA30-414 boot from the floppy USB drive

  Hi all!

  I'm tryin to get my my satellite A30-414 to boot from the floppy USB drive and enter the dos mode, but all I get is a black screen (without a slider, of course!), and then the windows XP login page directly. Can you tell me if this model has a boot device menu shortcut keyboard?

  Also, I may be permanently changed some configurations of starting (to know by pressing F12 at startup, then press F2 to try later) with my attempts to get the machine to boot from the floppy drive: now even when the floppy drive is not connected, I get this black screen awkward and then, after a few seconds, the logon windows page. How do I access the Setup menu and check?

  Thank you in advance for your help!

  Hello

  You can access the start menu by pressing the F2 key during the boot process. This will take you in the "setup" menu where you can change the order of selection of boot device as well as the other BIOS settings permanently.

  Kind regards