Satellite A40 turn off once all cases the battery is not connected

I felt that my battery has something wrong and I do not use much. I seconded to work on current alternative. The strange thing when windows or linux or any bootable cd running after while the laptop is turned off. But when I entered under windows in safe mode, it is not turned off.

When I plugged the battery again the laptop works very well. I have the Satellite A40. Is this a problem in my power unit or there is a problem in the video card?

Hello

It's not easy to say what could be wrong. The fact is that the laptop should work without any problem with and without the battery.
You said that this happens with any bootable CD but that this problem also occurs if the operating system has started?
However, I put t I think it happened because of the video card. This any sense doesn t.
It looks a bit like an electrical malfunction of the power supply. But it's not easy to tell without any trial. I think you should ask Toshiba service for assistance.

Tags: Toshiba

Similar Questions

  • You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

    You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

    I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

    Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

  • Satellite A100 - turns off the power after 60 seconds

    After pressing the power button, the laptop starts but 60 seconds from the moment it is activated, the it turns off suddenly?

    The fan turns, I tried cutting dvd, wireless, modem, ram, hard drive, it opens and clean all the dust. It turns off after 60 seconds exactly every time

    Any ideas?

    Thank you
    Ben

    Hello

    > and clean any dust
    How did you do that?
    Usually, you can use jet of compressed air to clean the laptop and remove the dust that blocks the fan. That is why it s not necessary to disassemble the laptop as you can read here:
    [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

    And the same thing happens if you access the BIOS instead of starting in Windows?

  • Hello! The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do? Also says I h

    Hello!

    The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do?

    Also says that I have no access to this service. For access, please contact your COMPUTER administrator or connect using the ID

    Hello

    Greetings!

    Is Typekit on?

    Visit this link: Add to your desktop of Typekit fonts

    Concerning

    Jitendra

  • C50-A-1HF satellite will turn off by itself after 2 seconds

    Hello

    the laptop turns off by itself after 2 seconds when I turn it on. This happens if I shutted down or choosed hibernate before (Win8.1).

    This means hibernation is not at all useable.

    The next time I turn it on it works quite normal! Sleep mode works as well. Standby mode it is ready for use after open them both as a repetitive. Fascinating!

    I looked on all the settings of the BIOS, but I found nothing what could be the reason for this behavior.

    Perhaps there is a correlation with another strange behavior. The battery will not be charged over 80%. I do not use the green mode. I have to turn off the laptop and remove the battery completely for a minute. After inserting and booting Win8.1 what it charges again at 100%.

    The discharge time is approximately 3.5 hours. Otherwise, the battery is ok.

    But after the next discharge up to 10% charge that up to 80% more.

    These two effects are not normal. But I don't think (or better, I hope) that there is a material defect.

    Is there a chance does not post the laptop to a repair service?

    Best regards

    Onurbi

    Hey man it are so strange problems and it's not easy to say what to do. All you can do is to install the original recovery image and test with the settings once more, of course without changing anything or install updates or additional applications.

    If possible to do this and test it for a while.
    > Is there a chance does not post the laptop to a repair service?
    As you probably know your possibilities to do something about this are very limited and if there is permanent problem I think you should contact the closest service Toshiba and clarify all of this.
    You have the new laptop model and it should work properly. If you are not happy and there are service problems Toshiba should take are about it and help you.

  • Satellite A200 - turns off randomly

    My Satellite A200 turns off randomly, I don't know if it is the power supply or 32 file system. I have re-installed Windows Vista 32-bit. and the problem still persists.

    Would that my adapter or power suply?

    Your laptop may turn off due to overheating. Before you start with your problem, did you laptop computer cleaning?

    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

  • iPhone 6s Won't turn off/exit out of the app

    So I was in the Twitter app and I got a text from my friend. I tried to open the text, but he wouldn't let me out of the Twitter app. I pressed the home button, and it would leave the application yet. I have locked my phone and then tried to unlock but now it won't turn on unless I repeadtedly press the side button, then the Twitter app will automatically return, it does not even show the lock screen to unlock. I tried to turn off my phone, but no matter how long I pressed the lock button, it does not turn off. It won't let me even open the calculator or the timer when I slide to the top of that little thing of menu. This phone is not even a week. Help, please! He refuses to go on anything except Twitter and turn off at all. Can I still use Twitter normally, however.

    Hold the sleep/wake and "home" button until the Apple logo appears. -AJ

  • Monitor not turns off when I close the lid!

    I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

    I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

    This is probably controlled by the power settings. Once you enter the power settings there should be an option something similar to 'change the closure of the hood '. There are probably several options such as sleeping, ect...

    You can download the manual in PDF HERE.

  • Unable to turn off anti-aliasing in the paint bucket tool!

    Hi all! Today, I have a problem with Photoshop CS6, I don't know why it won't let me not turn off anti-aliasing in the paint bucket tool. The toolbar shows me a gray box of anti-aliasing, unverifiable:

    Photoshop Problem.jpg

    Could someone explain how to solve? It is very irritating.

    The color - indexed color Mode you cannot click on Anti Alias.

    So if you change the image in RGB or CMYK, you will then be able to use the option of anti-aliasing.

  • Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people

    Please God. turn off this product. Your help desk services do not work, cannot turn off. I use the retail SECTOR, xi of adobe acrobat. Connected to the internet. On more than 20 min. open for disable grayed out. Windows 7 pro x 64. This shit makes people use fraud. I just want what it OFF can be USED on another COMPUTER.

    can anyone in the customer support to disable this?

    Hello Terry,

    I checked the serial number and found that you have enough number of activations left to install on 2 computers.

    Please uninstall the software and activate it on another machine. In case of problems please let me know and I'll help you.

    My direct email: [email protected]

    Chat Support email:

    http://helpx.Adobe.com/x-productkb/global/Service1.html

    Kind regards

    Rave

  • Can I turn off fieldpoint devices if the pc crashes?

    I am running a labview 8.6 application that manages multiple fieldpoint devices, these units are used among others to power phase 3 drive motor. If windows or the application crashes or fails or if the user for some reason any hit CTRL > ALT > DEL or just turns off the PC fieldpoint devices remain under tension, thus leaving the 3 phase power on! How can I make sure that if one of the following situations occur fieldpoint devices are turned off and 3 phases is turned off?

    Configure the watchdog.

    Ben

  • the screen is black at startup, I have to turn off many times before the lites screen upward

    screen is dark at the start until I have to turn off several times before the lites screen upward.

    [Moved from comments]

    Hi Ken,

    It would be more useful if you answer these questions.

    1 Windows operating system you are using?

    2. What is the brand and model of the computer?

    3. were there any hardware or software changes on the computer?

    If you use Windows 7, then follow the article provided to fix black screen at startup issue.

    Why my screen is black when I start Windows 7?

    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

    Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

    For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

    If you need help with the Windows operating system, just tell me and we will be happy to help you.

    Thanks vikrant I used scannow and it fixed my problem of registry. I have windows 7. Click Start type command RT. Click on the cmd icon, click on run as administrator, black screen should appear. type sfc/scannow press ENTER.

  • Can I turn off my PC during the upgrade to Windows 10?

    Original title: Upgrading Wondows

    Can I turn off my PC during the upgrade to Windows 10

    Can I turn off my PC during the upgrade to Windows 10

    Hello.

    No.; You can't turn it off while improving to 10.

    See you soon.

  • Should I turn off (disable) adobe on the computer program, it is. Until the program is installed on a different computer

    Should I turn off (disable) adobe on the computer program, it is.

    Until the program is installed on a different computer

    inaktivera.JPG

    It should be disabled on one of two computers so it can be activated on a new computer (which is the limit max of two activations).

  • Satellite A300D - 17G: some strange behaviors of the battery/adapter

    Help, please!
    My Satellite A300D - 17G stopped abruptly to recharge the battery. AC is plugged in, but it won't charge the battery and indicates "0% remaining. All contacts have been checked several times, without result. Do I have to replace the AC/DC adapter?

    Hello

    Can you turn on the laptop with AC adapter only?
    If so, then it means that your adapter is OK.
    In this case, I would try new battery.

Maybe you are looking for