Satellite A50 - 109 fan works not properly after the HD upgrade

Similar Questions

• Product # LW370UA #ABA; cooling fan works not properly!

  My computer product phone # is LW370UA #ABA

  Message started coming indicating that the fan did not work properly and can lead to frequent stops.

  Well... it stops frequently. What can I do?

  Hey mnorfleet,

  Can you confirm whether or not the fan actually? Maybe you can hear, feel the air flow, or even see it.

  If she seems to turn, maybe it's a little dusty in the movement of air flow or fan here and barriers. You can use a can of compressed air (available at any office store) to blow some of the dust.

  If the fan does NOT spin, I recommend strongly immediately calling assistance from HP to set up a repair: http://www8.hp.com/us/en/contact-hp/contact.html

• cooling fan works not properly when power is turn on

  I have a HP Pavilion Notebook PC g4, serial number: 5CD1202OQT and its product number is LN421PA #ABJ. Whenever

  I turn on the power, there is a message telling me that the cooling fan is not working properly. But before that, my pc fan used to

  make big noise when turn on without warning for this message. Now I know why this noise (FAN) has disappeared, but the message keep showing everytime I turn on my hp notebook. sometimes if I use my notebook hp longer for example watch film on it, it will turn off its own... help me with this problem or what to do?

  Hello

  Access the site of HP equip your product number select it the OS then update the Bios.

  Concerning

  Maton

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• IdeaPad Y570 fan works not properly

  Hello

  The fan on my IdeaPad Y570 suddenly stopped marketing. It does not spin regardless of the temperature, and therefore, the temperatures reach 90 C +. Mode of dust collection works very well, the fan turns as expected for the cycle and seems normal. If the fan is not physically broken or clogged. I also installed 3rd party software CPUID HWMonitor to check if temperature sensors work, and they all show temperatures at levels expected and more than high enough to warrant coming fan.

  I don't think that I have installed a new software that might interfere with it. I tried to reinstall the Lenovo Energy Management software, but that did not help. I also tried from the laptop in safe mode, without result.

  Thanks in advance for any help you can provide.

  HWMonitor screenshot:

  

  Applied Windows updates and this problem is solved. Hope this helps others in the future.

• Acer X 1930 works does not properly after the factory restore

  It did not work correctly since the restoration of my desktop Acer X 1930 under Windows 7. Now, it shows: "configuration of the Windows updates failed. Returning from the changes.

  Could someone please help?

  Hello, I had problems even when I went back to 10 Win7... The only way I could make it work just is for the first few newspapers in I had to restart my system rather often. I know that this is not a SOLUTION but is what I did...

  Load Windows 7, let the updates for about 3 minutes... I first tried 8 mins but still many updates. So 3 works for me... I am also connected on wire on a Giga lan with Ultra fast connection to my ISP... So time could vary for you...

  After 3 minutes, I had 20 to 26 update ready to be used. Restart the computer. They worked. Makes about 3 times. ON the 4th time I down load 90 updates to see if it would work. And he did very well. Then after that, I went to look at the missing updates to ensure that they were going to update or had... added some that were OPT... on on the last 50ish and they have all updated very well. But for some reason, if I let all try them and update from the beginning, they would fail. I think it's because they have tried to put in the updates before others will want that needed to be done first...

  I do not work for Microsoft or Acer and it is only first hand from one of my systems. This isn't a fix only my way to make it work.

  So if you have a connection interent fast and no more wireless I would say that for the first time you start your computer just let it run for a few minutes then go to the Start button and restart so you do a little at a time...

  I would like to know how it works for you...

  James

• Cooling fan works not properly.

  Sorry if this is in the wrong forum (Please direct me to the right place in this case). My fan is not spinning and overheat in a few minutes, I really don't want to use my laptop for fear of damage. I have completely disassembled it, has taken the fan and deleted every grain of dust, I got right inside the area of the field also. When I re-assembled (less than the numeric keypad) and turned on the laptop the fan kind of shaking a bit but do not turn, I can manually turn it so there is no blockage in there. Is there anything else that could be the cause of no spin? I'm assuming that the fan is ok connected due to the tremor on the startup. Any help greatly appreciated, thank you.

  The manual is not clear, but I think it's this one:

  For use in AMD UMA computer models 639463-001

  I think you had better take it hand back and get the number on the right side of the horse's mouth

  Here is the Manual:

  Manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite L40 - 14 H - do not start after the successful BIOS update

  Hello

  I have Satellite L40 - 14 H which was working fine until I thought to an update of the BIOS will not hurt. Seems I was wrong.

  I downloaded the update to the BIOS, it unzipped in a folder and started the action.

  After a few seconds was asked to wait, and then after few more firm.

  After the reboot, I pressed F2 to enter the BIOS and check that it is version everything was fine, version 2.0 so was I left once the parameters.

  After that, nothing happened.

  I almost tried everything without success. Removed the power and battery power, put their back, but still no start. Just the light of the HARD drive lights up for a few seconds and the cd turns a bit, but after that nothing happens at all and completely the screen is black.

  I don't know anything else to try.

  Please let me know what that can do to restore its functionality without taking it to the service, I can't do it.
  I think that may not be cause of failure of the BIOS update I have seen it is the version and was right.
  Is it possible to reset the BIOS? I need to disassemble the laptop to do this?
  Let me know what to do, I have good experience in such things, but I can't understand this.

  Thanks in advance for any response.

  Kind regards
  Stefan

  Hello

  I agree with Akuma. It really isn't that you can do about it. BIOS problems are complex and cannot be set by the owner of the laptop. Believe me you need professional help with this.
  Contact the closest Toshiba ASP and explain the situation.

• Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

  After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

  Help, please

  Hi Digambar,

  Welcome to the community of Lenovo!

  Please perform the below mentioned the troubleshooting for the troubleshooting steps:

  1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
  Note: All browsing history will be get deleted.
  2. If the problem is persists kindly update the playstore Google later.
  3. make sure that the update of the system is up-to-date.

  Please come back to us if the trobleshooting helped you.

  Thank you & best regards

• fonts Mathematica does not properly after the senior at el capitan

  I used Mathematica 5.2 on my MBP with Mountain Lion. After the upgrade to El Capitan, there is a problem loading the fonts and Mathematica does not load correctly. Any ideas? Wolfram has a package of fonts, but don't know what fonts to download or how to install them on my MBP. Any ideas?

  Please, back up all data before proceeding.

  Launch the application book fonts and validate all the fonts. You must select the fonts in order to validate them. See the built-in Help and support article for instructions. If the font book detects any problems, solve them.

  Start in safe mode rebuild the font caches. Restart as usual and test.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or the boot volume is a software RAID, you cannot start in safe mode. In this case, ask for instructions.

  If you still have problems, then in the font book menu bar, select

  The file restore Standard ▹ fonts...

  You will be prompted to confirm and then enter your administrator login password.

  Also note that if you disable or remove built-in fonts, for example by using a third-party font manager, the system may become unstable.

• «the cpu fan works not.» Check the fan connections and call for service. »

  I was wondering if a failure of different from 'CPU fan has failed... system in a few seconds will stop. " I have an office of DX - 2000 P4 under XP SP3 that I just changed the motherboard and CPU fan on. All the fans are running at about the same speed. (P/S, chassis and CPU). Not very fast but cannot see the fins. Computer sat for several years. I was wondering what is the real test and how the fan speed is controlled. I suppose that temperature sensors built into the cpu, somehow, there must be a variable voltage applied to the fans to change their speed and/or a measuring device to see what is their RPM. This must be controlled by the BIOS as is any pass/fail test. My next step is to replace the old fan and see what happens. I have a new p/s to install should be here today. Actually used, but cleaned up and tested. Economy of cleanup. Not sure if my older diet could be the cause of the issue with low Volt.

  If the fan is slower than the factory fan, you will have this problem.

• App Walkman search works do not properly after the update of the lollipop?

  Anyone else have problems with search app walkman? Yesterday it worked fine until I updated to the lollipop, when I wanted a song that she really was. Now he broke everything and can usually find the results only when I type in two or three letters. If I type less or more he finds nothing at all even though I know that I have these songs on my SD card.

  I can find the songs very well if I manually scroll through all the albums, but that is slow and the pain of doing...

  I've updated the walkman also application after I noticed this problem but nothing has changed. I also tried cleaning app/data cache, but it helps not at all.

  move several albums for the internal storage and try again, look for a song that is on the internal memory.

• Touchpad not working do not properly after the update to W7

  My DV5035nr has been recently wiped and upgraded to Windows 7. the touchpad is thrown around and driving me crazy. I went to the synaptics site and downloaded the proposed pilot, but the same problem continues to be. must I download another driver? Between the steps, I went into the control panel and deleted the synaptics driver before installing the new. the touchpad works very well when it is not a program or driver associated with it. can I run without additional software? any help at all would be appreciated... I'm not tech savvy enough to understand this point, but I can follow directions very well. Thanks in advance!

  Hello lizslone,

  Welcome to the HP Forums!

  I apologize that your touchpad is crazy! One reason might be because there are no drivers Windows 7, as shown here: HP Pavilion dv5035nr PC drivers

  I have a solution that can work, if you'd like to try:

  1. go in Manager devices, then mouse and other pointing devices.

  2. right click on the driver in question and select "Uninstall".

  3. restart the computer. This will force the computer to install a driver based on the detected hardware.

  Please let me know if you have any other questions. Thank you!

  Mario

• BlackBerry App Whatsapp works does not properly after the upgrade of the operating system 10.3.1.1565

  Hello

  After upgrade to OS 10.3.1.1565, I have problems with Whatsapp: when I get pictures, they download more in the photo folder and even I can't open them Whatsapp. They just stay inside the talk of whatsapp fuzzy mode. Advice to solve this problem?

  Thank you and best regards,

  Chris

  On my side, suddenly this problem disappeared... without do me whatever. Strange, but at least it works.

• keyboard and mouse not working not properly after installing Windows 8.1

  I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the system is restarted. Numbers on the keyboard stopped typing and letters were capitalized when the caps lock was turned off and the numbers at the top will only type the symbol above the numbers.

  I looked at this problem and it seems that I have to enter in the settings of the UEFI and disable the Intel XHCI mode. When I enter the settings of UEFI, I can't make any selection in the start menu. My keyboard and mouse stop working.

  Any suggestions?

  Thanks for posting a reply. Fortunately, I didn't have to try your solution because the computer solve itself.