Satellite A50-111: I get an error: cannot install MBR disks

Similar Questions

• Blue screen more often (Satellite A50-111)

  Hello. My laptop (satellite A50-111) stops with a blue screen. Sometimes when that I start the computer, sometimes, when I'm trying to play a video file, sometimes... I can't understand why... The error messages are inconsistent. They are different all the time (for example: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION or PFN_LIST_CORRUPT or PAGE_FAULT_IN_NONPAGE_AREA or something with IRQ LESS THAN EQUAL etc.).

  I suspect that the problem is the graphics card or RAM memory. It is because the file ialmdnt5.dll and ialmdev5.dll were mentioned in the error screens).

  I ran a test of memory from a CD bootable (memtest-86) and everything seems to be fine with the memory. However, the memory is not the original one. I did a brief day when I bought the laptop (the memory is TMC - 2 x 512 MB)

  Any ideas what the problem might be. The problem is that I have these blue screens more often (I've had them several times before but now I have at least one per day)

  Any ideas/suggestions?

  Thank you.

  More info: I ran the test memory Microsoft (in addition to above mentioned Memtest-86). Is it possible to have the RAM ok, but everything just does not work WITH my Toshiba laptop? In other words, is something special on the modules of memory supplied with the laptop (which I have not because I have improved the memory immediately when I bought the laptop). Thank you.

  Another relevant info: I used the program "auditor" and this explains why I've been blue screens more often. I turn off, but I have still a few blue screens (not as often as before). The newest one: «...» "Stop 0x0000008E... win32k.sys..." "However, I rarely have the same error message

• BIOS password? (Satellite A50-111)

  Hello. I have a Satellite a50-111 with the bios to version 1.30. Everything works fine. I put a password (which I think is a BIOS password) Toshiba HWSetup and indeed, when I turn on the laptop, I wonder a password until the system starts.

  However, I tried to get into the BIOS (at Esc) and I managed to get in without having to type the password. But I thought that the whole point of this password is to protect the BIOS! I don't understand what the purpose of this password? Any ideas? Thank you.

  EDIT: Later, I realized that I can start the computer without the password only when I use the reboot. It works as it should when I stop/restart the laptop.
  I guess that I partially answered my own question... well that is not clear to me what happens in the following cases: the laptop is off; someone puts is a bootable CD with another operating system (such as Knoppix) and restart the laptop (not arrested...) without the need to use the BIOS pwd. Is it still possible?

  Post edited by: hpop

  Post edited by: hpop

  Hello

  you need to differ between the two paswords!

  There are the user and supervisor pw that are different.
  The IPL user protects the system to enter the operating system without pwto. Pw supervisor protects the BIOS!

  Normally the pw is requested after each new startup, restart too!

  Campino Bye

• "" My Windows J.4 Center repair center is currently disabled but when I try to turn it on I get the error "cannot be turned on.

  original title: Security Center

  I had a virus to infect my computer but I'm to remove by doing the scans. I can't solve the problem of after-sales service. "" My Windows J.4 Center repair center is currently disabled but when I try to turn it on I get the error "cannot be turned on.

  Hello Barbaram1,

  Use the Windows key + R on the keyboard or click on start, select run.
  In the run box, type services.msc
  Click OK.

  Make sure that the Security Center service is enabled and started.
  Probably, you will need to click Start to start the service.
  The Startup Type should be automatic.  The status should be started.

  Let me know what happens. If the problem persists, it may be that there are residual questions of the malware infection.

  Councillor of State & progress.

  Maurice Naggar ~ MS - MVP

• Satellite A50-111 - HARD drive upgrade

  Hello!

  I need to upgrade hard drive of my laptop because it is very slow. However, I know it's a 60 GB to factory-installed 4200 RPM.
  I'm ready to be upgraded to a fast 7200 RPM, if possible, with a decent capacity, but I'm not sure of the supported hard drive type (IDE?, 2.5?) is a model of 5 years. In my view, there are incompatibilities with the laptops today, hard drive formats, so I really need help.
  Thank you very much for your help!

  These are the specs on the site
  http://EU.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 97598

  Hey Buddy,

  In my opinion the HARD drive upgrade will not increase performance well then you should try the other options first as reinstalling Windows, or upgrade the RAM.

  Anyway, Satellite A50 use IDE interface, so you can use hard disks of 120 GB of disk space.
  Of course, you can take a model at 7200 RPM, but they need more energy and produce more noise.
  I recommend a 120 GB 5400 RPM model. That s pretty fast!

• nitro loading a pdf editor and this error comes we - error cannot install the single window service

  someone sees this error I'm not able to load my nitro now and it has always worked.  error saying error-could not install the stop service my other programs such as microsoft office.

  Hi Sandra,.

  Thanks for posting in the Microsoft community

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Q10271 - PRB: error: cannot install the Windows Service
  http://KB.nitropdf.com/article.aspx?ID=10271

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Error - cannot install to root - CC want to put cc aps internal SSD flash disk

  Error - cannot install to root - CC want to put cc aps internal SSD flash disk. (I know LR5 go on Mac OS disk...)

  But what about the rest of the aps?

  Thanks for the note Jeff... Finally, I have determined that you must create an Applications folder on the SSD drive. (Of course) Make sure that your installation in the CC office location points to the SSD...

  then all is good...

  LR5 (according to Adobe) MUST be present on your OS drive...  Thanks again!

• When the computer restarts, I get the error cannot create shell notification icon please help

  When I reboot count it I get error cannot create shell notification icon can any body help me

  Thank you

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you update your BIOS, check with the manufacturer of the system for further assistance.

  Apart from that, I suggest you do an online virus and malware scan on the system.

  http://OneCare.live.com/site/en-us/default.htm

  If the problem started occurring recently, then I suggest you to do a system restore. See the article mentioned below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• Need drivers for Win7 for Satellite A50-111

  Hello!
  I'm looking for a driver for windows 7. I found the drivers for windows xp only.
  Could you help me?

  Satellite A50 is very old model of laptop and not supported for Win7, so you will not be able to find the drivers for Win7.

  I'm sorry.

• Try to save a copy of the contacts and emails in windows live to get the error cannot create .csv file

  Try saving a copy of contacts and emails in windows live to get the error can not create .csv file any help appreciated.

  First create new folders to the location where you want it on a local hard drive. Then use the Browse button in the Export Wizard to navigate to the files you created. Once the export is complete, copy the files to their final destination.

  Windows Live products and services are not covered by these forums. You will find support, solutions and forums for them to the Windows Live Solution Center. When you ask a question here, you should give your version of the software, because the answers vary depending on the version. In WLMail to find, has press on ALT - H. If it doesn't show you the version and the build number, press on escape to two times, and then Alt - F B.

  Noel

• When you try to run a system recovery I get this error: cannot start Windows. A recent hardware or software change might be the cause. OxcOOOOOOf

  When you try to run a system recovery I get this error; OxcOOOOOOf

  Original title: error OxcOOOOOOf

  My laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: OxcOOOOOOf

  Info: Seelected entry could not be loaded because the application is missing or damaged.

  It does not work. Suggestions and no, I have not modified before the crash.

  I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?

  Hi Anthony206,

  Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).

  From now on, you can only contact OEM for the use of the recovery feature.

  I hope this helps.

• Install windows 7 on the new hard drive getting the error cannot continiue

  I bought a new drive hard seagate from my existing was only 250 gig, so this is a new clean install, I installed the drive hard drive start the computer with the dick of installed Starter, he began to load then I get this error message saying;
  "Update failed due to a stop press unexpected ok to restart the computer." Installation will continue after the computer restarts. »
  However, when you press ok, the machine starts, but continues to display this error message and so am now stuck in a loop. What can I do to stop this, because I am totally confused. I have a second hard drive in the machine, but when it is started, he found the new HDD 1000 GB.

  I am running Windows 7 (64 bit),

  Processor AMD Phenom 11 X 4 3.4 ghz AM3 Quad

  MSI 790XT-G45 AM3 / AM2 + / AM2 AMD 790 X ATX card mother AMD

  Any help would be appreciated

  First chech that the BIOS is configured to use the CD/DVD drive as frist boot device.

  Then remove the old drive and only connect the new drive.

  Start the PC and insert the CD that you created and boot from the CD.  If there is a "Long full" test, which is that you need to perform. Also check the SMART data (look for bad sectors).

  J W Stuart: http://www.pagestart.com

• I get this error message, the backup disk image "/ Volumes/data-1/jackmatz of Air.sparsebundle of MacBook ' could not be found (error (null)).

  Hey get this error message

  The backup disk image "/ Volumes/data-1/jackmatz of Air.sparsebundle of MacBook ' could not be found (error (null)).

  In the context of what?

• 0x8024400A error, cannot install Windows updates.

  Original title: error cannot access windows update

  0x8024400A error message

  Hello

  1. you have any application installed on the computer security?

  2 did you a recent software or changes to the material on the computer?

  I suggest you run the FIXIT from the link below and. You can also try other steps listed in this article.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941

  Hope this helps and keep us posted.