Satellite A500/02U impossible to connect to the mobile phone using BT - defective service detection

Similar Questions

• Satellite A500 - 03P: unable to connect to the WLan using Win 7 + event message

  Hi all

  I recently bought the Satellite A500 with the offer included Windows7 while he was available late October 09.

  So I had the Toshibe DVD for the upgrade and followed the steps and Visa home premium upgrade to Windows 7. Now I have two questions.

  (1) I get a system event Notification after start, talk to me about the system event log. The full message is below.

  Unable to connect to a windows service
  Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service failed

  (2) I was able to use this laptop for the internet before the upgrade, both via a USB wireless drive as well to the office via a DSL modem.
  Now I can't access the internet after the upgarde of Windows 7!

  For example the Optus dial-up box pop up appears commandeLorsque I click on 'connect', it does not connect.

  Can anyone help please?

  Thank you
  C I

  Hey Buddy,

  (1) did you check the Configuration of the Service for this service? The Boot System Event Notification Service type must always be set to automatic. This service is absolutely necessary for Windows and shouldn't t be disabled or set to manual startup type.
  Check it!

  (2) to be honest I never heard on the internet BEFORE, but normally, it should also be possible to access the Internet with Windows 7.
  Make sure that the WLAN or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get on the page of Toshiba.

• Satellite A500-19W cannot be connected to the internet via WLan

  My computer got Win7 64-bit.
  We have 4 computers and all computers are connect to the internet via a modem.

  No one has never had a problem connecting to the internet until yesterday.
  They connect to the internet, but my computer does not connect.

  I encountered problems "problem with access point or wireless adapter.

  In summary, 3 computers are connecting to the internet, but my computer does not connect with the same modem.

  Please help me
  Thank you

  * I hope no errors in the English translation *.

  It is not easy to say what the problem is here, but try it please to toggle the device map local network once more. Use the FN + F8 key combination.
  Seeing WLAN on when you try to use internet?

  In my view, it cannot be a major problem. Be fair course of wireless network card is correctly activated. Also check in the Device Manager.

• Satellite A300-1NT is unable to connect to the mobile phone on BT

  I tried the recovery disk and Yes, wifi issues came OUT, but new problems arrived.

  I had HIDDEN on my phone via bluetooth and access point for sisters phone. However if I try em add to the list he says exactly what lies in this topic is for nokia (phones of mine are k610im and W710I)
  here

  He said: IMPOSSIBLE to detect a remote device, after it is displayed in lists. That is to say, it is able to DETECT it, but cannot connect to it. and I tried several times to do things like OS re-driving with the default.

  Ideas?

  Sorry for the panic, but it looks like I'm n0ob, because I forgot my cell is in HIDDEN mode, so I put it no Hidden and it works. someone could always find the one - UN - useful, but think that...

• Satellite L510 - unable to connect to the mobile phone

  Hi, I have a question and hope to get a solution for everyone! I use Satellite L510 run with Windows vista but the problem is that I can't connect my bluetooth with nokia 5230!

  It can connect to the nokia 7610 and 7610 connect to 5230 also no problem. So I'm just wondering why the laptop can not pair with my 5230! Thank you!

  What error message do you have? What is the last message on the side of the phone before the error occurred?

• Cannot connect to my Satellite M30-106 of the mobile phone using the IrDA port

  Hello

  I'm trying to connect my phone to my laptop via the infrared port, but the phone tells me it cannot detect all devices when I put it right next to the port of FIR. Some how do I need to activate it first? The device manager says that the device works, but how to check?
  I've never used this facility before on this pc. Can anyone help?

  I googled for your model type and it has an infrared port for sure.

  Maybe you should remove from Device Manager and then do a restart, so can reinstall windows? That might help, but I Don t know if he would.

  See you soon

• Re: How to connect to the mobile phone via the com port

  Hello
  I have problem with connecting my Nokia n82 (s60) phone to bt via COM port. I want to connect mobiola webcam and need it. Can U help please?

  Hello

  Satellite A300 Vista preinstalled
  Battery Bluetooth version 6.10.07
  Motorola Razor V3 mobile phone

  Not the same mobile phone, but the principle is the same.
  Without doing anything special, I connected my phone to the laptop in a minute.

  Allow BT using FN + F8
  Open Bluetooth settings, click the BT symbol in the taskbar
  Click on new connection
  Select the Express Mode > mode activate Visible on laptop > click OK
  On the new connection wizard, choose phone list and click OK
  When offered choose security PIN (for example, 1234)
  Check connection on mobile phone and enter PIN security
  After the PIN CPM40 control port will be enabled

  Then now is your phone connected to your laptop and you can, for example, transfer files from the phone to the laptop.

  By the way: what model of laptop do you have and which version of battery Bluetooth?

• Publish with the connection to the mobile phone.

  I tried to connect my Droid X 2 phone with my laptop Asus U47A, running under Windows 7 64-bit via USB; However, the computer won't "recognize" the phone. I downloaded and installed (and reinstalled) the appropriate driver. I also checked all my USB ports and the cable worked correctly. I downloaded all the updates for my computer and restarted it so the phone several times. I also tried to connect with the phone in "USB debugging" mode. The phone works great with my XP desktop, but I need to work with my laptop. I can't determine what is the problem and have exhausted all my resources and remain unsuccessful. I'd appreciate any help and suggestions please.

  Alisha,

  Thank you for keeping us posted.

  I would have you see the support article more.

  http://support.Microsoft.com/kb/2654149

  We know if you need help.

• Satellite A500-19 x - cannot turn off the sound by using the command buttons

  I can't cut using the panel on the laptop itself...
  It lights up when I push, beeps as well, but don't put the volume muted.

  From Toshiba tech suggested I reinstall value pack or something, in which I did, but always without success.
  The rest of the touch buttons work as eco etc...

  Running on Windows 7 standard and its only 24 hours old! :(

  Hello!

  Don really find t Toshiba Value added Package?
  Come on man, you have to look at the Toshiba site, where you can find all the drivers and tools for your laptop:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before installing the latest version, first remove the old and reboot the laptop. Then, install the latest version form the Toshiba page.

  Good bye

• Unable to connect to the mobile phone with Bluetooth Stack

  I can not connect with my Samsung Omnia i900 using battery from Toshiba. It works when you use the microsoft stack, but I want to you use a toshiba software.

  Any suggiestions?

  What error message do you get?

• Satellite M40-237: how to connect the mobile phone with Bluetooth

  I have a new Noki 62333 and I have a Toshiba Satellite M40 - 237. I have a big problem with the connection between them. I put t know how to turn on bluetooth on my pc. Can you help me???

  Hello Iva

  A friend of mine has Satellite M40 and I know that this unit is shipped without BT module. If the unit has BT module, you will find labels of BT on the underside of your laptop.

  To establish a BT connection with his mobile phone that he uses the key USB BT.

  By the way: fact Iva comes from Zagreb, Croatia?

  Good bye

• Satellite Pro 6100: Bluetooth - how to connect the mobile phone

  I already have a satellite pro 6100 with the bluetooth software on. I tried to connect to my mobile phone without success. The problem seems to be with the laptop rather than the phone.
  How can I connect successfully. I have to update the new drivers? I bought it refurbished 3 years ago and I'm just getting round to the use of bluetooth!

  Well, the Bluetooth software has been installed on your laptop, BUT the question is:
  Your group has installed Bluetooth card?

  AFAIK the Bluetooth is an option available on this unit. You must check the Device Manager and check the bottom of the unit if the Bluetooth label has been placed.

  I think that you cannot connect your mobile phone because BT is not available.

• 'Impossible to connect with the activation server' while trying to activate Windows 7

  Stater of the i run windows 7 on a laptop dell inspiron N5050 32-bit, windows asks me to re-enter my product key each tome I get it it displays after loading: impossible to connect with the activation server, see other ways to activate windows, pls make serious saying my trial period has expired why it cannot connect to the server to check the product key? Help, please

  Original title: activate windows

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Equium A200 cannot connect to the interest in using Wifi

  Hello

  Since having to reinstall Windows Vista Ultimate Edition, I can't connect to the point of using Wifi. It works very well for Ethernet, but when select the screen "to connect to the Internet", his Blanck and will not find any wifi connects or allow me to connect manually to a.

  In Manager devices under network adapters, it only now shows the Ethernet controller and not the Wifi adapter. I tried to download the driver from this site and after restarting, nothing has changed. I did that the machine has all the latest Windows updates as well. I also mader as the wifi button is lit on the front of the machine.

  As a note I can't find the exact name of the laptop to the system section of the control other than Equum A200 Panel. The driver download page there is NOT an A200 mentions only A300 and A300D.

  NES http://UK.Computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi & action = search & teddProduct = 759 & selShortMod = 667

  Any help would be grateful.

  Spec:

  Windows Vista Ultimate Edition
  Toshiba Satellite A200
  32-bit operating system

  > Also an note aside, I can't seem to find the exact name of the laptop to the system section of the control other than Equum A200 Panel. The driver download page there is NOT an A200 mentions only A300 and A300D.

  I guess you didn't look in the Archive the A200 is a little older, so that the drivers are placed in the Archives!

  If you want to know which driver you are interested in, then I recommend you this faq:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  All Wlan drivers can be found here:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite A60-124: using the IrDA port to transfer the data to the mobile phone

  Hi, I want to Exchange data between a phone mobile SonyEricsson and my laptop A60 - 124 via an IrDA port. I activated the infrared sensor in the phone but the laptop does not detect anything.

  The device setting menu shows my port Irda ok and seems to be enabled. What should I do?

  I m not 100% sure but I think on some portable computers, you can enable and disable the IrDA port in the BIOS. Check to be sure.

  In the control panel in the IrDA option, you can choose the place where the incoming files must be saved. So if the IrDA connection has been activated on your mobile phone it should work.
  Remember that the mobile phone IrDA window is in the right position.