Satellite A500/031 to TV via the HDMI screen shows connection pink

Similar Questions

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• Satellite P500 - cannot get sound through the HDMI to the TV

  Hello

  my system is a P500, win7 64 bit, ATI Mobility Radeon HD 4500/5100 Series video card, 4 meg RAM.

  I can't get sound via the HDMI to the TV,
  I've updated all the drivers.

  There is also no noise from interface SPDIF playback devices, it says Conexanant SmartAudio HD ready. Computer laptop speakers and headphone works.

  See you soon.

  Hello

  SPDIF or digital audio (HDMI) output is visible in Control Panel-> Sound-> tab reading?

  If so, mark this device as * default * and test the sound of the TV again.

  Greetings

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• iPhone 3G, without warning, the iPhone screen shows (vertical hold) logo from itunes, with a port usb and the arrow pointing up. I have 10.7 update iPhones.

  Without warning, the iPhone screen shows (taken vertical) logo to itunes with a usb port and the arrow pointing up. I have 10.7 update iPhones. When this iPhone is connected to the computer, Apple recommendation is to "restore" the iPhone. If I do this, would be erased all data stored? Thank you

  You would have to post on Apple Support communities to get a definitive answer on this one.

• I can't seem to keep the flash player on my computer, the installation screen shows it is installed but it doesn't work

  I can't keep the flash player installed on my mac.  the installation screen shows it is installed, but it does not work or display on my screen to the right

  Settle in the appropriate forum.

• How to enable IR on the Satellite A500/031

  Does anyone know how to activate the IR port of a Toshiba A500/031 (part - PSAR9A-031001 number)? I can't find how to turn it on.

  I also own series a500 1 but have never used but I think you should switch wlan on the laptop. Then place devices with infrared port near infrared port on the laptop and it must be recognized. You can also try with Configfree (I don't know if it helps because I removed this utility)

• Satellite L650 - no signal on TV via the HDMI port

  Hello

  I have a problem with the HDMI port. I am not able to connect the L650 to my TV. There will be no incoming television signal. The TV port is correct because I can connect my digital camera without any problems. The HDMI port is not displayed in the hardware Manager. I don't use the version of windows 7 that has been installed originally. I formatted the disk and have reinstalled a different version of windows.

  Do I need a special driver to activate the HDMI port? I just installed the ATI catalyst driver. If you would like more information, I'll try to give them as soon as possible.

  Thank you very much for your help

  Hi song2.

  > have reinstalled a different version of windows.
  And what version of Windows you have right now?
  You have yellow exclamation points in the Manager of devices or unknown devices?

  In general there is no driver special HDMI port. If you connect your laptop to TV/monitor external, you must press the FN + F5 key combination to switch between monitors.

  Check it!

• Satellite X 200 SLI falls down when the HDMI cable is connected

  Hello world

  I'm very sad about this. You just bought a new brand Toshiba x 200 SLI and I get a crash (blue screen on Vista) when I plug the HDMI on my Philips Full HD TV.

  I did not almost any update, but still, this shouldn't happen on arrival!
  Clues?

  Many thanks for any help on this!

  Hmmm this error is known to me, but unfortunately it is not easy to tell what's exactly wrong or what causes this problem.

  Sometimes this BSOD could be linked to the issue of driver/software, but the last time I received this message on my 5 year old laptop and finally I discovered that one of my modules of memory was defective!

  However, this laptop was equipped with two GPU chips then perhaps there could be something wrong who knows?  :|

  But it s very strange that in this case using the HDMI port to my knowledge only this satellite X 200 series are supported by a standard HDMI V1.2 (up to 1080i).
  Did you use the right cable?

  As you can see an investigation is necessary to locate the cause of the error.

  If there is something wrong with the hardware I would recommend contacting the ASP in your country in order to clarify this strange issue.

  Good luck

• Satellite A500/A505 - some problems after the recovery process

  I recently used the my Satellite A500, A505 recovery partition to get rid of a particularly persistent virus after running several antivirus programs, all to nothing does not.

  Now the virus seems to have disappeared, but the computer doesn't seem to be in the State it was in immediately after its opening.

  Firstly, the resolution is such that the taskbar, menu start and the desktop icons are all much larger than normal.

  Secondly, it seems to be missing some graphics files enables it to play my games that I put on it from my backup (in other words, it is showing the bottom of the game screen and play music and SFX without showing the character sprites or the menu options).

  Thirdly, my Fn + F6/F7 does not allow me to adjust the brightness of the screen of the computer, the only way that I know how to adjust the brightness of a Toshiba laptop.

  EC who if anything, could I hurt in all this?
  What might be able to do to solve these problems?
  I don't have no internet right now, but I have a USB and eternal patience, so I can use another computer and transfer everything what you suggest on mine.

  Nevertheless, I prefer solutions that do not like it, if possible.

  Surely appreciated!

  To be honest I never heard of this issue.
  In my opinion you should try to make the installation of recovery one more time to check if the same problem occurs again.

  You have created recovery disks?
  If Yes use recovery disks for recovery image installation.

• Satellite A500 - icon Volume missing from the taskbar

  My volume icon disappeared from the taskbar (Satellite A500 / Windows 7). When I right click on properties to display the 'enable or disable system icons', the volume icon is there, but can not change off to on as the 'stop' is grayed out.

  Someone at - it indexes?

  Hello

  Maybe your card its isn't recognized properly. Have you checked for yellow exclamation marks Device Manager?
  Maybe the audio driver. You can find the latest version on the Toshiba site.

  Normally you can toggle the icon of volume if you in Control Panel > sounds and Audio devices.
  Check it!

• Satellite A500-19U - games crashes after 3 Min then only connected to the power adapter

  Heys guys. I got my new Satellite A500-19U and install it on some games like COD4, Batman, Assasin Creed and many

  All of these games crashes & freezes after 3-5 Min & gimmea the screen black or white and everything happens while pluging adapter to recharge. When you use the battery, it crashes too, but it takes a long time. Some time, he said (the display driver not responding) & sometimes the screen black or white. The only way to recover the laptop is ALT + CTRL + DELETE and kill the game processes.

  The only one that works such fine bit is Battlefield Bad Company 2. Then I change the DirectX (setting.ini) of car in DirectX9.

  SP please any help on this matter. I think it's a video driver or a Windows 7 problem. And the specifications are:

  Processor: Inter Core 2 Due P7450 2.13 GHz
  RAM: 4 GB DDR3
  VGA: Nvidia Geforce G210M [with the driver from Toshiba Site]
  OS: Windows 7 64-bit

  SRY 4 my English: $

  Hi Storm2005,

  A 64-bit Windows 7 preinstalled on this notebook or install it yourself?

  In my opinion, you should check the cooling options in Windows power management. Make sure that it s set for maximum Performance. This means that your laptop will be cooled as much as possible.

  I put t know how long you have this laptop already but maybe that cleaning is also an option.

• Satellite A500 - how to register on the site Web of Toshiba?

  Hi, guys

  A week ago, I bought Toshiba satellite A500-1dn, while trying to register it here http://uk.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
  It is for me, serial number not valid, then I tried to use, auto detect this system - but always the same result - your product not supported,

  your suggestions, please

  Hello

  You want to register your laptop to get an extended warranty?

  In any case, in the first instance, you must register your laptop on the Toshiba page.
  http://EU.computers.Toshiba-Europe.com > support & downloads > Warranty & Service registration

  After that, you can buy an extended warranty here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > Service offering

  In my case, it worked then visit the page again. I think that you have used the wrong link.

• Satellite A500 - 19 X - which is the maximum supported RAM?

  Hello

  I have a Toshiba Satellite A500 - 19 X with Windows 7 64 bit Home Premium edition. It came with 4 GB DDR3 1066 MHZ RAM. Can anyone let me know the maximum supported RAM for this hardware configuration and OS.

  Kind regards
  Vivek

  Hey Buddy,

  You can answer this question yourself!

  I checked the specifications of this laptop on the Toshiba site and you can upgrade the RAM 8 GB. Therefore, you (1 066 MHz) DDR3 RAM and two 4 GB modules. They should be the same manufacturing to avoid problems of incompatibility.