Satellite A500 - 03P: unable to connect to the WLan using Win 7 + event message

Hi all

I recently bought the Satellite A500 with the offer included Windows7 while he was available late October 09.

So I had the Toshibe DVD for the upgrade and followed the steps and Visa home premium upgrade to Windows 7. Now I have two questions.

(1) I get a system event Notification after start, talk to me about the system event log. The full message is below.

Unable to connect to a windows service
Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service failed

(2) I was able to use this laptop for the internet before the upgrade, both via a USB wireless drive as well to the office via a DSL modem.
Now I can't access the internet after the upgarde of Windows 7!

For example the Optus dial-up box pop up appears commandeLorsque I click on 'connect', it does not connect.

Can anyone help please?

Thank you
C I

Hey Buddy,

(1) did you check the Configuration of the Service for this service? The Boot System Event Notification Service type must always be set to automatic. This service is absolutely necessary for Windows and shouldn't t be disabled or set to manual startup type.
Check it!

(2) to be honest I never heard on the internet BEFORE, but normally, it should also be possible to access the Internet with Windows 7.
Make sure that the WLAN or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get on the page of Toshiba.

Tags: Toshiba

Similar Questions

  • Satellite Pro A40 can't connect to the WLan using the Win XP

    Hi all

    Newbie on your site so thank you in advance for your answers ;-)

    Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.

    Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?

    It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.

    Any ideas please?

    Thanks Mike

    Hello

    First of all, you must update the WLan driver.
    I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.

    In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
    If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.

    Last but not least, you can try to use this command in a DOS (CMD)
    Ipconfig / renew

    Big names

  • Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

    Hi all

    I had a very big problem with my card.
    I can t connect to the internet.
    I searched the forum but without any determination :(

    I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
    Someone said too
    "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it redétecte this new")

    How to disable the modem?
    And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
    I put t even know that :(

    Help me

    Hello

    The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
    LAN driver can be found on the page of Realtek.

    You ask how to disable the modem? I think you mean how to reset modem DSL
    Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

    If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

    Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

    All that s

  • Satellite M30-604: unable to connect to the WLan

    Hi all

    I have some problems with my toshiba SM30-604

    First of all, I find the product in the section support somehow, even I can't find it by giving the serial number! ???
    Even with the program auto-detection!

    The other big problem is with the wireless card.
    Since the first time I bought the laptop when I tried to connect with some internet wirless networks I had problems with certain types of escryption of these networks.

    If the network is an escryption
    WPA,
    WPA 2,.
    WPA - PSK
    WPA2-PSK
    I can not connect to this network and he brings a message, something like "the network may not be available at this time" Although it is.

    Even if has a WEP encryption and password isn't a 10-digit is brings a message like "the neck should be 40 bits or 104 bits and 5 or 13 ASCII characters and 10 or 26 hexadecimal characters.

    The last days I can not connect to any wireless network for the above reasons.
    I know that its an old pc, but it is very good even for today an I still use it even I have other laptops

    Please can someone help me?
    Will there be some updates for my card toshiba wireless?
    I downloaded the automatic detection tool, but it does not recognize my pc model

    Under my pc has this data:

    SM30-604
    model No. PSM30E-0SY2K-GK

    the wireless card must be the:
    Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter

    I'm desperate this problem.

    Nick

    Post edited by: niksta

    > First of all, I find the product in the section support somehow, even I can't find it by giving the serial number! ???

    The portable M30-604 PSM30E-0SY2K-GK is an old classic. Right?
    Well, Toshiba driver European page you will find three categories: Archive, book and Options.
    If you don't find this portable model of laptop in the computer category then I would say that the next step should be archiving. Right? To me, it seems plausible to check the area archives due to the age of the laptop.

    In addition, the books are sorted by serial number; means that you won't find satellite M30 604 but Satellite M30 PSM30E.

    To my knowledge the Intel (r) PRO/Wireless LAN 2100 supports only 802.11 B Wlan standard and only the key WEP, WPA, encryption (AES +).
    FTP://download.Intel.com/support/wireless/WLAN/SB/intelprowireless2100mpci_prodbrief.PDF

    This means that if the WiFi network is not set to 802.11 B and if the WiFi network has been set to WPA2 encryption, so you won't be able to connect to this network.

  • Satellite Pro M70: Unable to connect to the WLan with ConfigFree

    Salvation in the Forum.

    I have problems with a satellite Pro M70, about gaining control of wireless connections.

    When I scan with "The Radar" I have ConfigFree for available wireless accesspoints, I get several points available, but it is not able to connect to one of them. I can read their status and see their marker of WEP encryption.

    When I try to connect to one of them, I get a pop-up dialog, that said (translated from Danish) 'suppliers another software is in control of the wireless network card. When you try to configure a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

    Is the unnamed "other provider" associated Windows or perhaps associated McAfee (Security Suite 2007)?

    If you are familiar with this problem or something like that I'd be please to know.

    Also - where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers?

    > Trying to make a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

    It should not be a ConfigFree. According to you, an Intel ProSet utility or a Client Atheros wireless network adapter might be controls the Wlan configuration!

    Please check if one of the two control the WiFi network tools and turn off!

    > where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers

    You should have three different tabs in the utility Configfree.
    The second device settings provides the list of devices, and you should see the wireless network connection.
    Choose and use the button network connections.
    There you should find some encryption settings!

    Also check the profile settings tab and the option called security settings

  • Satellite Pro 6100 - unable to connect to the WLAN router

    Hello

    I brought a 2nd hand Satellite Pro, model version SP6100 (PS610E-029ZV-EN), P4 1.7 Ghz, 512 MB, 30 GB, with Windows 2000 Pro loaded.

    I can't connect to my wireless router. The switch is in the correct position.

    I want to change to XP using the key provided with the new laptop (dual OS) however I can't reformat using a XP disc at the start up or if I use the recovery cd (start with holding C and let go when he works up) it starts but displays 'specification drive not valid' three times and charges Win2000.

    Can someone advise how (or if!) Can I reformat I want?

    Any help will be greatly appreciated.
    See you soon.

    Are you sure that the wireless network adapter has been installed in the laptop?
    Check in Device Manager

    On some series WLan is optional. This means that the WLan card is not installed, but it is possible to install an and, consequently, the laptop contains the WLan switch.

  • Satellite L735-10V - unable to connect to the internet using ethernet

    I have problems connecting to the network via ethernet.
    connect the ethernet cable and the laptop connects to the net, but after a few seconds it disconnects.
    I don't know what the problem is.

    I tried to disable TCP/IPv6 and it doesn't work.
    Please can someone help me here.

    It's just killed me.

    It is not easy to say what may be the problem.
    Have you noticed the same thing using WIFI?

  • Satellite L505-144: unable to connect to the Wlan 802.11 N

    Hello, I hope someone can help me with this

    I've updated my old network wireless at home so I can stream media.
    I replaced my old netgear G router and bought a netgear DGND3300 dual band N router to the hub and a WNDA3100.

    Office everything is set up ok on these as I can connect up to 300 kbps, which is good.
    The current settings for the router are:
    Up to 130Mbps at 5 GHz & 54Mbps 2.4 GHz"
    channel 36 = N
    Channel 11 = G

    Although the problem is the laptop.
    Now, he says that the wireless laptop is N. When I connect to the router it connects only when G setting and I only have until 45 Kbps.

    Is there a way so that it can connect to BOTH channels to get the full speed or the wireless laptop is only a single tape device?

    Thank you
    Steve

    Hello

    Built into the laptop LAN card is a Realtek RTL8191SE 802.11bgn.
    As you can see the wireless network card supports three WLan standards; 802 11 B, G and N.

    First of all, you must make sure that more recent Wlan driver is installed;
    New WLan driver can be found here:
    http://APS2.toshiba-tro.de/WLAN/

    In addition, you should check if 802.11 N standard has been chosen.
    You should do this in the Device Manager-> card WLan-> properties-> Advanced tab.

    Welcome them

  • Satellite C665D is unable to connect to the WLan

    Hello

    My in-laws are staying with me and their C665D does not connect to our wifi network.
    I can't turn on the wifi settings.

    I looked in to network adapters Device Manager and there is no present. I tried to add a new device through "manage wireless networks" and he says "Wireless is not currently enabled.

    If I try to manually add a wireless network it comes up with 'windows wireless service does not work.

    Look forward to some help on this one

    The error "the windows wireless service does not work" indicates that the Wlan service has not been started.
    Why? I don't know, but you can try to activate this service first.

    To manually start the wireless service, i.e. the WLAN AutoConfig service, perform the following steps:

    1. connect to the computer as an administrator.
    2. Click Start, type services.msc and press to enter.
    3. Locate the autoconfiguration WLAN service, double-click to open its properties window.
    4. on the general tab, change the startup type to automatic and click on the Start button.
    5. click on apply, then ok.

    Then try to connect to the wireless connection and check the result.

  • Satellite A110-195 unable to connect to the WLan router

    Hello

    I have a wifi router and I have connected my laptop and it worked wery well but on low there is I could not conect to router but woudn't ip address pop up. Internet access was not.
    I am connected to the same router another device and it worked...

    Hello

    Believe me, there is no general solution, you must check all the settings of your operating system

    First of all that I recommend to check the parameters of the TCP/IP protocol if everything is settled automatically on.
    Then check if you are using encryption parameters right as standard (WEP, WPA, WPA2) encryption and the encryption key.

    It s also advised to reinstall or update the Wlan card driver

    If you used the windows own WLan configuration, I would recommend testing as Atheros Client utility or Intel ProSet Wlan client configuration utility. But it depends on the WLan card what client WLan configuration utility can be used

    concerning

  • Re: Satellite P50-A14G - unable to connect to the internet using a wired connection

    On my laptop, Satellite P50-A14-G, I can't connect to internet via wired connections.

    WiFi does not work properly, but not the Ethernet card. It has not any light when I connect the wire, and I realized that on the Panel of the map icon does not appear.
    My OS is Windows 8.1 update 1.

    Hello

    Have you checked status LAN card in Device Manager?
    Please make sure you that network card installed, listed and active properly.

  • Satellite L300-1AQ unable to connect to the WLan

    Hello

    I'm a novice at computers so any help would be grateful.
    My husband bought my laptop Toshiba L300-1AQ 5 days ago, I am trying to link up to my netgear router, when I look at my wireless network I can select my network as its signal strength excellent.

    But when I go to connect it just happens like windows cannot connect to my netgear Wireless association failed because windows did not receive response from the access point or wireless router.

    The wifi light is amber and when press FN + F8 the wireless is turned on?
    Please point me in the right direction im running on Vista Home premium.
    Device Manager my network card is showing the link of wifi wireless intel (R) 5100 that the device works properly.

    Any help please.

    Kind regards

    Shelley

    Hello

    The problem may be the router itself. Restart your router and try to connect again. If the WIFI network is encrypted be sure to use the right WIFI password.
    If nothing helps, please contact your internet provider. Make sure your router is good configuration.

  • Satellite L300-217 - unable to connect to the WLAN

    I can see the SKY network, I am trying to connect to (5 bars). _I can't connect_ (despite having the network encryption key). The error message is 'user timed out' (he thinks little about when I press on connect)

    I have a connection of network wireless WPA Old Virgin that I can't remove. I hit delete and he disappears for a few seconds then comes back. SKY seem to think that this is the problem

    I have updated the Atheros wireless network cards so my Realtek

    Any suggestions? Thank you

    Hello

    What is SKY network? Is this normal router WLAN you have at home or what it is exactly?
    This network is probably blocking the new MAC addresses. If the MAC address of your wireless network card must be allowed on this router.

    I put t think the problem is your old WLAN connection. This doesn t affect other connections

    > have updated the Atheros wireless network cards so my Realtek
    What WLAN card you have exactly?
    You need a single driver because that one wireless network card is installed.

  • Satellite L300-11th: unable to connect to the WLAN

    When I try to connect via WIndows - it cannot get an IP address. When I try to connect life PROSet - I get the message that WLAN driver is not installed.

    Driver for RTL8187B since the Toshiba site has been installed successfully.

    There is no Bluetooth in my model.

    Your laptop still has factory settings or you have installed your own operating system?

  • My ZTE open C unable to connect to the wlan with 63-signs-hex key.

    Hello

    my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

    Oliver

    Hi OliverwithZTE,

    I understand that you have connection problems to your network WPA2-PSK.

    Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

    -Ralph

Maybe you are looking for

  • Clean System

    Sometimes I feel a little uncomfortable about the way the system is clean. Y at - there is, Apple, recommended program assistance is to clean up the system? I'm looking for just general things without having to scan each line of code to see what to d

  • "There was an error connecting to server Apple ID" not reliable CRL issue

    I started getting errors connecting to my Apple account on iTunes/App Store / iBooks etc., I noticed today. In an attempt to connect, it would return the message "There was an error connecting to server Apple ID" This debugging with Wireshark, I noti

  • G505s slow down the speed of the CPU load while.

    It's terrible using CPUz, I see that, while the laptop is in charge, the clock speed down to 900 mhz and fluctautes between this and 1400 mhz, it's shocking, I can hardly Watch youtube videos or even post this thread, the LAG and slow is unbearable.

  • Pavilion dv7-1285dx windows vista 64-bit

    the motherboard on my pavillion dv7-1285dx supports a newer processor? Socket 1156? 1366?  I was thinking about upgrading my cpu for core i5 or i7 processor?  I was also considering upgrading my nvidia video card as well.

  • Upgrade memory for HP dc7600 desktop form factor small

    Hi, I just bought a desktop computer used lease hp dc7600s and was wondering about the upgrade of memory. My question is: 1) there are 4 memory slots and card explains the website of hp max supported memory is 4 GB. Can I put 1 module 4GB or 2 GB set