Satellite A500-13F - strange noise when the context changes

Similar Questions

• Satellite P200 made strange noises after the closure of music

  I have a Satellite P200 and flash cards do not respond and when I ve played music.
  The computer makes strange noises after the closure of music?

  Help me please!
  friend Wendy

  Hello Wendy

  Please don't get me wrong, but it's not easy to understand the problem that is described in your ad.
  I have the same model of laptop and everything works fine. I listen to music every day on Windows media player (mp3s) or radio listening online using the Winamp player.

  At the same time, I can use flash cards.

  What about strange noises? Who knows what you mean exactly and how us need to understand that?
  If please be so kind and explain exactly what you do and what kind of sounds you can hear.

• Satellite L500 - high-pitched noise when the USB port is in use

  I have a Satellite L500-1ZP, aged from 1 month. When I connect a usb key or other device in my usb port, the laptop generates a high-pitched noise.
  The sound is not strong, strong but enough to irritate me.
  When I disconnect a device, the sound disappears.
  The sound is also there when I disconnect my laptop to the grid form.

  This is a common problem and can it be resolved?

  To be honest I don't think that this is a common problem. Is that what you found more threads with the same description of problem?
  The same happens when you use the available USB ports?
  You can locate where this noise is coming from? Maybe the speakers?

• Satellite L505-13Z - strange noise in the audio output

  Hello

  I had a problem with my speakers (probably the one on the left): starting Windows or when windows live notifies a new incoming message sound I hear is not clear, but there is a noise similar to a robotic sound. Sounds like my speakers don't work well. 10 days ago, I bought my toshiba.

  Thank you very much

  Hello

  > to start windows or when windows live notifies a new incoming message sound I hear is not clear, but there is a noise similar to a robotic sound. It looks like my speakers
  > do not work well. 10 days ago, I bought my toshiba.

  What happens if you connect the headset and check what's happening? When you listen to the music it exists?
  I think that you have to play with some settings of his windows event.

• Problems of sound with Satellite A500-13F

  I bought a laptop Toshiba Satellite A500-13f and it's very good, but
  My problem is that the * sound cut when you're listening to music and returns after 30 seconds * and also * a product of her pulse in the left internal speaker sound when the frequency of the high musical rhythms *.

  Please help, please

  Hello

  What are the strange sounds that even with factory settings, the sound cuts. I can advise you to update the audio driver no form page driver Toshiba but from here:

  http://downloads.Guru3D.com/downloadget.php?id=2486&file=4&EVP=b3f15a2ab7c566c 9889ed65f5c7d5453

  If she's not always you help, there may be a hardware - related problem.

• Satellite A500 - icon Volume missing from the taskbar

  My volume icon disappeared from the taskbar (Satellite A500 / Windows 7). When I right click on properties to display the 'enable or disable system icons', the volume icon is there, but can not change off to on as the 'stop' is grayed out.

  Someone at - it indexes?

  Hello

  Maybe your card its isn't recognized properly. Have you checked for yellow exclamation marks Device Manager?
  Maybe the audio driver. You can find the latest version on the Toshiba site.

  Normally you can toggle the icon of volume if you in Control Panel > sounds and Audio devices.
  Check it!

• Satellite A500-13F: can I install drivers for ATI page?

  Hello

  I have the Satellite A500-13F with graphics ATI Radeon HD 4650.
  Can I install drivers from ATI downloaded from their site? I ask because theres a note on downloading the page saying as follows:

  Following books are not supported in this version: *.
  *...*
  * Computers laptop Toshiba (Please check with your mobile phone OEM for support of the drivers for these books) *.
  ...

  What does that mean? Do I have to install these drivers, will they work?

  Thank you

  Hello

  Still, you must download the drivers from the Toshiba driver page because they are pre-tested. Talk to the graphics driver, it is modified and a protection against overheating. So, I'm not advice you to use the ATI drivers. You can use them, but at your own risk.

  Welcome them

• Tecra S1: Notebook generates noise when the LCD display is on

  Tecra S1 is 4 years old and generates a high noise when the LCD is turned on (from last week). The noise comes most of the keyboard. Could this be a defunct ups?

  Is there an easy way to fix it? It's not very loud, but in a quiet that is audible.

  Hmmm I think this noise comes certainly from the FL inverter.
  But I can't tell if the inverter is faulty or not because I noticed that her top on different laptops when the brightness of the display is placed on the lower floor.

  But if you think that this problem was not present in the past, then you need to contact a technician who could help you replace the inverter FL.

  Best regards

• Satellite X 200 - strange sounds, close the cooler

  I have this x 200 for over a year now and for the last 10 days, I hear strange noises near the cooler which is located on the lower side right (the cooler in the cooler of the DVD).

  I don't know how to open this workbook for maybe clean the fan or Exchange it. It looks like a guide to disassemble for this machine.

  Thank you

  Sounds like the fan needs to be replaced.

  Is the system under warranty? I would send it to an ASP for repair. The X 200 is a complicated design and can be difficult/risky to pull out by the owners.

• PCI-6733 signal noise when the computer screen is plugged, the weight on the case

  Greetings,

  I hope that it is in the right section.

  Card: PCI-6733

  I'm a 60 Hz, 2 mV peak-to-peak with a compensated 2.4mV noise when the monitor is plugged into the VGA port.

  Same card in a second computer, problem is more serious, 4mV Ridge to Ridge, 4.3mV offset. When I push on the case near the power supply the offset rises from a few millivolts.

  The two computers are running the same exact versions of software and drivers. Dell and quite similar to each other in both material and form.

  I have a third computer that noise coming out of the map is horrible no matter what.

  I exchange business cards and the problem is with the computer, does not follow the acquisition cards.

  No idea how to solve this problem and what is the cause?

  Thanks for any thoughts!

  -Michael

  Tall_Michael,

  Looks like you may be plugging your monitor and your computer in different points of sale.  If this is the case, this is probably the cause of your noise and can be eliminated by connecting the two devices on the same socket.

  Here are some articles that deal with the noise you are experiencing and various workarounds in the cases where what I mentioned above are not the case:

  The problems of noise in the measurement configurations

  Sources of the measuring Signal ground

  How to eliminate noise on measures DC power without using a lowpass filter of material?

  I hope this helps!

  Thank you

  Trey C.

• The mouse freezes when the cursor changes icon

  Hello. The problem is that when the cursor changes its icon for example when taking screenshot with cmd + shift + 4 it freezes until I'll click. Basically, it moves only when selected. It is annoying when I'm working in C4D where when you draw cursor change and makes it almost impossible but it's not in Photoshop.  Someone has experienced something like this? Or maybe some ideas what the problem is?

  I want to mention that this happens only on one of the two user accounts on the computer

• Value change event, be it be programmed to trigger only when the USER changes the value?

  The structure I set up is the following, I have a control in which the user chooses a value when they choose this value, the value change event takes place setting in the device. Then I am bed in unit values and display them in this control via a property node.

  My problem is that whenever I read back a new value in the control, he takes this as a value change event and resets the value within the system, is it possible to make this event don't move when the user changes the value?

  Yes!

  My thoughts are that you use a Value property (signalling) node to display for the control. That will trigger another call to event.

  Use the NO signs of property value node or a local variable.

  Your postal code, if this isn't the case, then we can help you understand what is happening.

• Is there a fix for when the reader changes all my program icons?

  Is there a fix for when the reader changes all my program icons?

  See http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

• How to list the when a Table is created, and when the last change?

  Is there a way to know when a TABLE was created originally, and when the last change (=. for example, the last INSERTION of a line or UPDATE a line)?
  
  Peter

  Hello!

  select created,last_ddl_time from dba_objects where object_type = 'TABLE' and object_name = 'table_name'
  

  created ways to create object (table)
  last_ddl_time means when the structure of tables was the last modified time

  But there no opinion with dml last on the table. You must provide this with a few columns on table (Last_dml_time) that should be filled with
  Some database triggers

  Or if you have enabled AUDITING, then last time dml is registered also in audit trail

  T

• Satellite C855-12Z - strange noise, even if the cooler is off

  Hello again,

  I have a toshiba satellite c855 12z and I heard a strange noise even if toshiba pc health monitor shows that the heater is off, it's like an air blowing inside the laptop, you need 2 coolers? or can it be the hard drive? When I bought the laptop was very quiet, now I always hear this noise...

  Help please

  It's always hard to talk about things that are not verified...
  There are two things that could create a noise: cooling fans or HARD drive.
  Cooling fans are not DISABLED the cooling module can run at a lower speed, but it is not completely off.

  HARD drive runs too, but it should not create noise if the HARD drive is OK