Satellite A500 - 15 M: unable to connect to the TV with HDMI

Similar Questions

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Unable to connect to the server with ttisqlcs, failed to retrieve IP address of the system

  Please help me, I have installed timesten server and client on different machines in the LAN, but with the same user and group - ttadmin:ttgroup

  When I tried to connect to the server with ttisqlcs - connStr "DSN = sampleCS"

  The result gave me errors like below

  Connect "DSN is sampleCS ';.

  S1000: Unable to retrieve the IP address of the system. System error:-2

  The command failed.

  Fact.

  The related part in sys.ttconnect.ini is defined as below

  [192.168.0.206]

  Description = TimesTen Server

  Adresse_reseau = 192.168.0.206

  PORT_TCP = 53397

  And the sys.odbc.ini

  [ODBC data sources]

  sampleCS = TimesTen 11.2.2 Client Driver

  [sampleCS]

  TTC_SERVER = 192.168.0.206

  TTC_SERVER_DSN = nredb_ds

  That wants it mean by 'recovering intellectual '?

  He is trying to resolve IP by hostname even when I already gave him the ip address?

  Either way, I can ping 192.168.0.206 and telnet to port 53397 without problem.

  Please help me, thanks ~

  It does not matter that they are VMs (I use between virtual machines all the time), but "Networking" of VM, of course, must be set up correctly. But if you can ping and telnet between VMS so that shouldn't be a problem.

  On the client computer, you have an entry in/etc/hosts for the client machines and the server? Even on the server? Please check that and add entries if they are not there and see if it helps. If not then we need to find the client using 'strace' to see which system call fails. Please try and after the release (or at least the last part that leads to failure).

  Thank you

  Chris

• Unable to connect to the internet with Foxfire. Can do with Internet Exporer

  I've been using Foxfire. After an update I can no longer connect to the internet with Foxfire. IE can connect.

  Firefox is the name. Foxfire is a bio-luminescent fungus.
  
  http://en.Wikipedia.org/wiki/Foxfire _ (bioluminescence)

  See this support article - difficulty of problems connecting to websites after Firefox update

• Unable to connect to the internet with other programs (like Zune) but internet explore still connects.

  I can connect to the internet with internet explore very well. No problems.  But when I try to connect another program to the internet, like Zune or Wildtangent games the program says that I'm not online.  I know that I'm online because I check to make sure you Internet explore, and which still works.  I already tried to change the firewall settings to allow programs through, but that did not work either

  Hi Chloe,.

  1. What is the exact error message?
  2. Since when are you facing this problem?

  However, try the following steps.

  Step 1: Add zune except for windows firewall.

  1. click on start toreduce this includes this image, type firewall.cpl in the Search box and press ENTER.

  2. click allow a program through Windows Firewall. Collapse this includes this image
  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  3. click on add program.

  4. click on Browse.

  5 locate the Zune and then click Open.
  Note By default, the Zune is installed in the following location:
  C:\Program Files\Zune\

  6. click OK twice.

  Step 2: Windows live onecare

  1. Start Windows Live Onecare.
  2. Click change Onecare settings.
  3. Click the firewall tab.
  4. Click on Advanced settings.
  5. Scroll through the list of programs to determine if Zune appears in the list.

  ·         If Zune appears, make sure that the Zune is set to allow instead of block.

  ·         If Zune does not appear, follow these steps:

  1. click on Add.

  2. Locate the Zune and then click Open.

                  Note By default, the Zune is installed at the following location: C:\Program Files\Zune\

  3. click OK twice.

  http://support.Microsoft.com/kb/927980

  Try these steps and let us know the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• Satellite A500 - battery light flashes when connected to the power supply

  Win 7 Satellite A500 PSAM3A-03P00E.

  Battery light flashes when connected to the power supply (intermittent fault), when I disconnect the sector and reconnect the flashing stops and battery (high capacity) continues to receive.

  Also, when battery light blinks the keyboard backlight stays on when it should white and if the backlight is turned off and the battery light starts to blink the keyboard backlight turns on, all other functions seem to work well.

  Charges of battery and the wedges load properly (when the battery flashes).

  Hello

  Have you noticed this problem since the first day of purchase?
  Theoretically, it could be possible that your battery begins to malfunction
  On the other hand, an electrical problem could also be possible

  However, try this:
  Remove the battery and the AC adapter. Then press and hold button power 30 sec long.
  Then insert the battery and plug AC adapter still does that help?

  By the way: this is the BIOS updated? If this isn't the case, perform an update.

• Satellite L40: Windows Vista unable to connect to the network

  My Satellite L40 laptop was connecting to my network wireless perfectly since Christmas. But two days ago, it stopped! I can see the networks available on the laptop but when I try to connect I get the message "Windows cannot connect to the network. Following the link to "Diagnose the problem" has no useful effect.
  I installed Windows Vista Service Pack 1 yesterday to try to solve the problem, but always without success.

  Any advice would be appreciated.

  Select this option.

  Hello

  Please go to the drivers Toshiba download page and download the latest Wlan driver for your wireless card installed, then remove the old driver and install a new one. It should work.

  Otherwise, you should try to recover your entire system and replace the drivers installed by some more recent...

  Welcome them

• Satellite L505-12 q - unable to connect to the Wlan on Draft N Router

  Hello.

  I have a Toshiba Satellite L505-12 q who that I connect to router Edimax br 6524n.

  My problem is that when I connect to the router the laptop does not use n 802.11 g... The network card is Realtek RTL 8191se... He supports the project and it is configured to receive B G and N. When I set up the router to use only the band N the portable project sees the network, but when I try to conect it can not...

  Can someone tell me where is the problem?
  I updated the firmware on the router and adapter driver and still nothing good... :|

  Thank you.

  Post edited by: Matt1990

  Hello

  First you need to update the WLan driver.
  Here is a page with all the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  After that, go to Device Manager-> properties-> Advanced tab WLan card and check if the Draft N has been selected.

  Restart the device and then try again

• Satellite Pro M70: Unable to connect to the WLan with ConfigFree

  Salvation in the Forum.

  I have problems with a satellite Pro M70, about gaining control of wireless connections.

  When I scan with "The Radar" I have ConfigFree for available wireless accesspoints, I get several points available, but it is not able to connect to one of them. I can read their status and see their marker of WEP encryption.

  When I try to connect to one of them, I get a pop-up dialog, that said (translated from Danish) 'suppliers another software is in control of the wireless network card. When you try to configure a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  Is the unnamed "other provider" associated Windows or perhaps associated McAfee (Security Suite 2007)?

  If you are familiar with this problem or something like that I'd be please to know.

  Also - where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers?

  > Trying to make a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  It should not be a ConfigFree. According to you, an Intel ProSet utility or a Client Atheros wireless network adapter might be controls the Wlan configuration!

  Please check if one of the two control the WiFi network tools and turn off!

  > where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers

  You should have three different tabs in the utility Configfree.
  The second device settings provides the list of devices, and you should see the wireless network connection.
  Choose and use the button network connections.
  There you should find some encryption settings!

  Also check the profile settings tab and the option called security settings

• Satellite A660 - 11 M - unable to connect to the Windows Mobile 6.1 smartphone

  I can't connect my phone (sony ericsson experia x 1) to my Windows 7 laptop. When I'm connecting via toshiba bluetooth stack configuration, it shows me an error "connection was refused by the PAN Server [name of the my phone]. I tried to change some options in the bluetooth stack, but it has been unseccesfull.

  I'm sure that there is no problem with my phone, because I can connect at any time to Windows XP on the laptop of another.

  See the how-to document
  "How to connect PC to internet via Bluetooth using a Windows Mobile 6 phone".
  http://APS2.toshiba-tro.de/KB0/HTD9602MW0000R01.htm
  It describes your problem, and proposes the following:

  Resolution:
  * Check if your Windows mobile phone is always connected to the internet.
  * Make the Internet sharing connection once again.

• Satellite Pro A100-828 refuses to connect to the internet with modem MDA Vario 2

  I have an Equium A60 which I use regularly as a modem for mobile internet access. Still, it connects to my MDA VARIO 2 (HTC Tytn) and gives quick access.
  However I just bought a Satellite pro a100-828 who, for some reason, refuses to connect to the internet through this phone.

  T-mobile want nothing to do with the problem and that it is a conflict between the phone and the bluetooth stack Toshiba. The phone has always look like that is going to connect and then to computer recording connected to the screen network switches the modem feature phone.

  As you can guess I'm sitting at the old equium typing this so if anyone can shed some light on this I would be very happy?

  I tried to uninstall the bluetooth stack.

  The fact that your old Equium was connected via BT to this modem?
  Perhaps a Bluetooth stack of new version of battery BT facility allows or you can try to use the same version of BT stack that is installed on the old notebook

• Unable to connect to the router with windows 7?

  I have just bought an Acer Revo R3700 and installed Windows 7 above, but I can't connect to my router.

  My router is heaven and successfully has 4 laptops (both under Vista, two 7 running), an Xbox and a Wii and two smartphones connected to him. Yet I just can't do this system to connect to him.

  I'm at my wits end... I've tried absolutely everything. I searched the Microsoft answers site found several similar problems and tried a lot of solutions, including adding files in the registry and update drivers.

  At first I could connect to the internet every now and then, but it was biblically slow (I tried to download Google Chrome and got him to 0.2 Kbps) and soon disconnected. Now I can't connect at all.

  I just downloaded a the Ethernet controller driver and updated a driver WLAN as they apparently do not come with Windows, but it still doesn't work. Although the message has now changed to "Unable to connect" to "Limited connectivity" (even though I think it's more coincidence than anything else)

  It should not be a question of signal strength, like the Xbox and laptop computers work fine when placed next to her.

  Really needed a solution to what running an ethernet cable is not really an option :(

  Thanks in advance guys. I'll be happy to provide any additional details if you need it :-)

  EDIT: / / I would add that I seem to be able to connect fine with a phone as a hotspot? It is very very weird.

  EDIT: / / I just managed to connect, but its very slow and not changed anything for the last 100 times? Everything seems to be completely random when it let me? : S

  Hardware support comes equipment - including the drivers/software manufacturers to use such software in all operating systems.

  Looks like a possibly faulty hardware or shotty (the wireless network device.  Make and model)?

• Equium A60: Unable to connect to the browser with Wlan

  Hi on my A60, there is no switch on the right side to connect to the internet browser, the laptop shows large signal and connected, but I can't seem to get access, are there keys that I could use?

  Hello

  Sorry, but I don't understand what you mean with and most laptops have a switch on the side to connect to the internet. Using the WIFI connection?

• Unable to connect to the internet with iPad mini, iOS 9.2, while I can with my old MacBook, OS (10.75).

  I'm away from home at a place which provides the free wifi connection without password.  My old MacBook with Mac (OS 10.75) is connected to the internet without any problem here. My iPad mini iOS 9.2 cannot, and they are many around here. What should I do besides take a hike outdoors?

  Don't know how this issue would be related to products that we support in this forum... AirPort Express, AirPort Extreme and AirPort Time Capsule below... but we will try to help you get started in the right direction.

  

  Start by looking at this Apple support document:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  If still no luck, you will receive a much more informed response if you post in the forum to support iPad. The link is here:

  With the help of iPad