Satellite A500 - 18Q - battery not detected after installing Windows

I have Satelite A500 - 18Q (PSAR3E) and Windows 7 32 bit

Windows is not detected battery. What should I install to the Windows recordnize the battery?

Hi marnin,.

Have you installed Windows Toshiba Recovery disk or normal drive of Microsoft?

Normally for the battery you n t need an additional driver. He will be recognized automatically.

Can you charge the battery when the laptop is turned off?

Tags: Toshiba

Similar Questions

  • Satellite A500 - TV tuner not recognized after installing updates

    Recently, I ran a few updates (Windows 7) for Satellite A500 (PSARA9A). It has a built-in tuner & it worked fine until updated. Now when I go to watch television or check it comes up with "No tuner available to meet the demand for courses".

    I tried to install the new driver, but I can't tell if he does something. Device Manager me indicates that the latest drivers are installed, but it shows the yellow exclamation point.

    Can anyone suggest anything here?

    In my opinion you should try to roll back the OS to an earlier time using System Restore tool.
    This should be a quick and temporary solution.
    After this check the functionality. I put t know what settings do you use for Win updates installation but I suggest you turn off the automatic option.

    Later when you will be informed about available updates checking a little list and if a driver update is listed here don t install. Use the original Toshiba drivers only.

  • WIFI device not detected after installing Windows updates.

    Original title: WiFi stops working when loading Windows (Win7).

    After that the last series of Win7 update is more my Wi - Fi works.

    My computer is the only one in the affected House. Wi - Fi is on (the radio light is on) when you start up loads of Windows, and then he went. More my factory installed Atheros wireless network card is no longer visible in the device, only the Ju Fast Ethenet controller Marvell Manager. I have re-installed the Atheros driver in the hope that the system would then find the device. No luck. Even the F8 key is operable, so using the FN + F8 key to activate the Wi - Fi is a bust.

    We know that the camera is good, but Windows doesn't see a reason any. This seems to be a matter of Win7 and not a hardware problem.

    • Please let know us if there is a FIX to this problem - I spent the last 4 days of research on this and I'm not alone.
    • I can re - install Win7 or y at - it a patch that I can use? With the help of a cable Ethernet is well when you're used to a Wi - Fi connection!

    & Devices:

    Toshiba Satellite P305D-S8818

    Atheros AR5BXB63

    Hi CDanahy,

    1. What are the updates recently installed?

    How to find the number of update:

    a. click Start, type windows update and press enter

    (b) in the left pane, click view update history and find the updates recently installed.

    2. are there any yellow listed under network adapters, Device Managerexclamation?

    To check:

    a. click Start, type devmgmt.msc and press enter

    b. expand the network adapters and make sure that the exclamation points.

    Method 1: Run the Microsoft fixit

    See the following site:

    Hardware devices do not work or are not detected in Windows

    http://support.microsoft.com/mats/hardware_device_problems/en-us.

    Method 2: Disable any security software

    See the following site:

    Disable the anti-virus software

    http://windows.microsoft.com/en-us/windows7/Disable-antivirus-software.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3: Clean boot

    See the following site:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.microsoft.com/kb/929135.

    Note: to set the computer back to start normally, use the step 7 in the same link.

    Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

     

    I would say as you to see the site mentioned below:

    How can I troubleshoot network card?

    http://windows.microsoft.com/en-US/windows7/fix-network-adapter-problems.

  • Satellite P300 - Microphone is not working after installing Windows 7

    Hello

    I recently did a clean install of Windows 7 on my Satellite P300. The microphone has been fine with Vista but does not currently work with Windows 7.
    I tried to go to the sound section and it does not list the casting Mike - just struggling. Can anyone help?

    Thank you
    James

    Hello

    Maybe you didn't install the driver for the microphone? Therefore, you will need to install the driver for the webcam, because the microphone is a part of it. You can get it here:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    After that, it should be possible to use the internal mic.

    By the way: internal what application you are using for the microphone? Skype or something?

  • Battery not detected after upgrading Windows 10

    Improved my Aspire 5738 of Win 7 to 10 to win. After upgrade, no battery is detected by the laptop. I like to win 10, but if no solution is found, I'll neeed to roll back to Win 7 fast enough, or I'll be stuck with a laptop that is always running in an office environment.

    I tried the old standbys (unplugging everything, release the power button, then restart, then adding back battery), but does not work. Someone at - it any other ideas / suggestions /directions?

    Thank you!

    Please check if you can make a battery driver reset. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. +++ If I have been helpful, a KUDOS is to enjoy and don't forget to mark "Accept it as the Solution", the post that solved your problem. Thank you.

  • [E530] GPU NVidia not detected after installing Windows 10

    Hello.

    I have upgraded to Windows 10 a month but noticed now that NVidia gpu is not detected. I tried to disable and re-enable it in the bios but nothing helped. Is - this common problem (I guess not, since I have not found similar positions) or is there something wrong with my hardware or something? What should I do?

    Well, I installed Win 10 once again and now it seems to work.

  • Satellite L305D - Touchpad does not work after installing Windows 7

    I had recently installed Windows7 32 Bit there is almost a week on my Toshiba Satellite L305D-S5934, and now the tablet to the PC no longer works.

    I was reduced to using an optical mouse on my computer. I've updated all my drivers and firmware etc on the windows update software and still I have not been unable to get the touchpad working. Windows 7 had installed the driver of synaptic for the touchpad pointing stick, but im guessing that he needs a special Tosiba firmware to recognize the touchpad for this model. What should I do to get the touchpad working again?

    Here are the specs of my model:

    PC x 86 ACPI
    64-bit AMD Turion X 2 processor
    ATI Radeon 3100 graphics card
    Synaptics PS/2 Port TouchPad

    I installed Windows 7 on my Satellite Pro P300 and touchpad works properly. The OS is naked and I didn't install any additional touchpad driver.

  • WiFi not detected after installing Windows 7 Ultimate 64 - bit Elitebook 8740w

    Hello

    I used a DVD to install Windows 7 Ultimate 64 - bit to replace Windows 7 Professional 64 - bit on my Elitebook 8740w. In the end, I used a new facility as the upgrade option ended with a failure error. However, after the clean installation, it cannot detect any wifi. What drivers I am likely to need download and re - install?

    Thank you, in advance.

    Kenwin

    Hi, Kenwin:

    Here is the link to the wireless card driver you need:

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4137878&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_108502_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • Satellite A100-011 - Bluetooth not working after installing Windows 7

    Hi, I have a Satellite A100 - 011 (PSAARE) and I tried to install windows 7 on it.

    I used the installer of the software of toshiba for windows 7, and in Device Manager, all of the devices seem to be properly installed. (There is a disabled person, or an unknown device). However, I can't have my bluetooth appears or use it. I tried to install the 3.00 Vista bluetooth stack, but it didn't work. Why isn't my bluetooth device and function appear anywhere in windows 7? Someone at - it had a similar problem?

    Let me add that the WiFi is working normally.

    Hey,.

    I m no owner of the Satellite A100 but I think you need more recent Bluetooth software and drivers for Windows 7 to Vista place

    Check Toshiba Bluetooth portal for the latest versions:
    http://APS2.toshiba-tro.de/Bluetooth/

  • Satellite L50-A01Q - WLAN not detected after installing the Atheros WLAN driver

    I have a C50-A01Q. I recently replace the hard drive for an SSD. I installed Win8.1 via a DVD downloaded from Microsoft. I also installed the Download Driver Atheros Wireless LAN from Toshiba. However, the system does not recognize the WLAN. Someone reinstall windows 8.1? How did you get the driver?

    Maybe your laptop has a Realtek or Intel WLAN card inside. Specification of your laptop does not for me so I can't say with certainty what WLAN card is inside.
    Try to install other drivers and check in Device Manager.

  • Sony VAIO VPCJ111FX touchscreen not detected after installed Windows 8.1 (clean)

    I had to install the new hard drive in my Vaio, needless to say due install the new OS... Figured since it's touchscreen Windows 8.1 would be the way to go.  Yes, well now a my touch screen does NOT work!  What is the problem with that?

    Sony VAIO VPCJ111FX

    8.1 Windows x 64-bit

    500 GB HDD SATA/7200 RPM/MIN/32 MB cache

    p. s.

    YES, it IS a touch screen!

    Hi DCwell1977, while they inspected the drivers of this model, it seems that this unit doesn't have drivers available for Windows 8.1. You can also visit this link and check the compatibility of this model to Windows 8.1. It's not necessarily you cannot upgrade to Windows 8.1, but we cannot guarantee that all the features of this unit will work.

    If my post answered your question, please mark it as "accept as a Solution.

    bit.LY/LapMagWin

  • External hard drives and USB not detected after installing windows 7

    Original title: does not display the hard drives laptops, but do sticks

    for some reason any lately
    any laptop computer portable hard disk or 3.5-inch usb drives work, but do memory sticks
    some show in computer management, some don't
    I've updated the mb drivers
    trying to not format to fix this little problem
    ideas?

    Hello

    1 have had any changes made on the computer before the show?

    2. What is the brand and model of the computer?

    3 have you tried plugging the laptop hard drive on different USB ports?

    I would suggest trying the following steps and check.

    Method 1:

    Run the utility of Windows troubleshooting for hardware and check.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Check if it helps.

    Method 2:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 in the article.

    Method 3:

    Throw a virus with the Microsoft Safety scan scanner to make sure that the computer is virus-free.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Let us know the results.

  • His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

    No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

    Any help will be much appreciated. Thank you.

    As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

    Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

  • NDAS services stopped and do not work after installing Windows 8

    Ladies and gentlemen,

    My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

    Does sb know what to do?

    Best regards, Rolf

    Hello

    If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

    Please provide additional information for a better understanding of the issue.

    1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

    2. how many computers using the hard disk on LAN?

    Specify the computers with Windows 8.

    3 are the computers in a home group?

    Please post the information requested to receive specific troubleshooting steps.

    Other links

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

    Why Windows is not find my device?

    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    I hope this helps.

  • Satellite A500 - 18Q - battery is at 25% in 4 days

    My Satellite A500 - 18Q when standing up, the battery is exhausted to 25% in 4 days.

    Try to check if Usb sleep & charge, is activated. I had the same problem with usb charging on and disappeared after disabling

Maybe you are looking for