Satellite A500-1GL - some FN keys only work does not correctly

Hello
I have the Toshiba Satellite A500-1GL, and I have a problem with the FN key (actually not the key itself, is the other keys, the keys that have orders)
for example:
FN + ESC = mute, and it works great!
But... FN + F8, should turn the wireless, but it's not!
Here is a list of what work is / is not:

FN + ESC: Mute {color: #008000} (Working) {color}
FN + F1: Lock/unlock windows {color: #008000} (Working) {color}
FN + F2: Search {color: #ff0000}(Not Working) {color}
FN + F3: Sleep {color: #008000} (Working) {color}
FN + F4: Hibernate {color: #ff0000} (doesn't) {color}
FN + F5: Screen output Monitonr/projector {color: #008000} (Workin) {color}
FN + F6: Decrease brightness {color: #ff0000}(Not Working) {color} it really increases the light!
FN + F7: Increase brightness {color: #ff0000}(Not Working) {color} it decreases! O_O
FN + F8: Turn the wireless on / off {color: #ff0000}(Not Working) {color}
FN + F9: Toggle the Touchpad {color: #ff0000}(Not working) {color}
FN + space: focus {color: #ff0000}(Not Working) {color}

I tried to use the Toshiba Service Station to check for the update, but I couldn't find!

I'd appreciate any help.
Thanks in advance.

See you soon

Hello

You need to reinstall the Toshiba Flash Cards Support utility and added value package!

First remove the two pieces of the system software.
Restart the device and then first install the PPV then Toshiba Flash Cards.

Welcome them

Tags: Toshiba

Similar Questions

  • BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!

    I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It does not correctly read the keys and is to register them as another key! Help pleaaase!

    This looks like what I've seen several times on a device with moisture damage.

    Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

    Really, it is more common than you think.

    1 the battery immediately! Do not turn on your BlackBerry device.

    2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

    3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

    3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

    * Suggestions on your BlackBerry in a warm dry place (open, with battery):

    • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
    • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
    • On the dashboard of your car on a day sunny
  • with firefox 43 yahoo and yahoo mail doesn't work does not correctly

    With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

    I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

    Thanks for the help!

  • WIFI doesn't work does not correctly after driver update

    I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

    Problems...

    1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

    2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

    If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

    If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

    For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

    Best regards
    ERICO

  • Why is one of my 4 5893 Modules doesn't work does not correctly?

    Hello

    This is the configuration of my HW and SW:

    LabView 2013 SP1

    1 x cRIO 9076

    4 x NI 9853 CAN Modules

    CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

    CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

    I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

    So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

    While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

    I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

    I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

    Thanks for your help

    I solved the problem, it was an error of configuration on my side.

    The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

  • Update KB976902 now the mouse doesn't work does not correctly

    I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

    The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

    I did a restore on a single computer, but it did not help.

    Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

    NB: If a step said to reboot, reboot!

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

    4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

    5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

    6. restart a last time & test.

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • The mouse scroll wheel doesn't work does not correctly?

    Win 7, Microsoft Wireless Mouse 5000
    Everything worked fine but I had to reformat & return my computer again the conditions of the plant.  I have add the correct software for my mouse.  Now, when I use the scroll wheel, it moves the screen a full coming soon page (spreadsheet, word processing, etc.).  The unique thing is that I can say that she does so ONLY with products at Microsoft (Excel & Word so far), with any other software, it seems to work as it should (a few lines at a time).  No one knows what is the cause?  Help please.

    Thanks in advance... Bob

    Hello

    1. have you checked if the problem occurs with a different mouse?
    2. don't you make changes on the computer before the show?


    You can try the steps provide in the supplied knowledge base articles and check if that helps:
    Troubleshoot a wireless mouse that does not correctly
    http://support.Microsoft.com/kb/321122
    Troubleshoot the incidents of the response to the mouse or wireless keyboard
    http://support.Microsoft.com/kb/838398
     
  • Satellite A500-1GL upgraded with keyboard backlight, but do not work

    Hello

    I have a laptop Toshiba A500-1GL.
    I wanted to upgrade with a backlit keyboard, so I went to an authorized Toshiba reseller in my area (Portsmouth, UK) and after checking the laptop, they said yes, it supports a backlit keyboard and it cost around 90 pounds (about 140 dollars) the price of the backlit keyboard and the cost of installation.
    So I said okay, let...

    But the keyboard does not work!
    I went back to the place where I bought, and I asked the guy (yet) "are you sure that my laptop takes in charge the backlit? ... He said yes, and in fact he removed the keyboard and showed me 2 connectors (one to attack the keyboard and fix the lighting cable)

    Then. My computer supports portable backlit keyboard... But it's not working!
    I tried to reinstall the package added value, Flash card... Chipset... almost anything!
    But it still does not (it should work when I click Fn + Z)

    What can I do now?

    I can't return the keyboard, because the guy said "sry its now use!
    So, what should I do? Is there something I should install/remove I'm missing or what?

    Any help will be appreciated...

    See you soon.

    Hello

    What to say either the technician has done something wrong or the laptop is not extensible.

    As far as I know the keyboard lighting is controlled by the BIOS.
    In my case, I can disable and enable it in the BIOS.

    I don't know if your BIOS contain this option, but you could check it
    Please note that each model of mobile phone is supported and some BIOS each BIOS is different.

    In my opinion if the BIOS does not support this feature you so would not be able to activate the lighting, even if the keyboard has been installed.

  • Ctrl key doesn't work does not correctly

    Hello

    I have a HP Pavilion 17-e031sa laptop bought only 2 weeks ago running Windows 8.  The CTRL key does not work as it should.  In general, I would like to use it with the left button of the mouse to select non-consecutive items for the copy, but this won't work for this function.  It doesn't seem to be the key itself, because it does not work in the combination of keys ctrl/alt/delete.  I tried to uninstall the keyboard driver and restart, but without success.  Any help would be appreciated.

    Hi riggy69,

    Sorry for the confusion, I knew that these keys would not do the function you're looking for. I wanted to know if these shortcuts worked using the CTRL key. So we can see if it works this particular function or all keys ctrl shortcuts work. Quick access keys did what they were supposed to do? For example, the Ctrl + X cut the selected text, or Ctrl-Esc opens the start menu?

    Trying to see if there something wrong with the key itself or is someone wrong with this particular feature you try.

    Thank you

  • Caps lock key doesn't work does not correctly. New computer.

    My shift key does not work correctly. Sometimes it works, sometimes it doesn't. I push on it is difficult to ensure that it works. But used in a standard keyboard, it is a problem because I don't bang the keys. I have to keep retype phrases due to errors that it creates.

    Its a shame because my computer is new. In fact, within a month, it is the second time I have to look at the service center. First time because the memory of my computer showed I consumed 40 GB without even having saved/downloaded a single file/document. The repair center did not have an answer and reformat the computer. This problem has been resolved.

    Was so much happier with my Dell computer. Nothing fancy, but no problem.

    I have the same problem. the button is enabled as soon as the second or even third. you don't want to, but you have to take it back in service. Maybe it's a factory default.

  • Satellite L40 - 18W PSL4CE - while charging the Touchpad doesn't work does not correctly

    Hi all..

    I'm on Toshiba Satellite L40-18W-PSL4CE model 00H0000GAR...
    Recently, my adapter went cause of overvoltage... so I changed the new adapter after changing the new adapter...
    My touchpad does not work correctly...
    That is to say... If I work with baterry the touchpad works very well... If I connect to the AC adapter the touchpad works not properly but the external pout works well.

    Please help me...
    Thanks in advance...

    > Recently my adapter went cause of overvoltage... so I changed the new adapter after changing the new adapter my touchpad is not working properly...

    Using the power adapter Toshiba original and recommended?
    In my opinion, the issues could be linked to the new Ac adapter and may happens with an adapter not entirely comatibel AC

  • These recent key apps does not work does not correctly

    My recent phones apps key was no longer works. He works in time more than 2 out of 10, or less. Any body having the solution for my problem.

    Try restarting your device first. If it still does not work, then maybe try a Factory Reset.

  • Touch Pad doesn't work does not correctly? HP-Envy-15Q004TX

    Hello
    It is the first HP product I've ever owned, I'm pretty happy with the laptop, outside of windows 8.1 However, is not the concern of this post. My mouse pad stops working when I press a key, as in if I press 'W', while trying to move the mouse on the screen then followed mouse stops. So it is impossibe to play all kinds of games and making it really difficult to do anything else and it's just embarrassing. The only button that does not affect this is the key of the SIFT.

    I have no idea what to do, y at - it a setting or something like that or I'm just miserable?

    Thank you

    puffm wrote:

    Hello
    It is the first HP product I've ever owned, I'm pretty happy with the laptop, outside of windows 8.1 However, is not the concern of this post. My mouse pad stops working when I press a key, as in if I press 'W', while trying to move the mouse on the screen then followed mouse stops. So it is impossibe to play all kinds of games and making it really difficult to do anything else and it's just embarrassing. The only button that does not affect this is the key of the SIFT.

    I have no idea what to do, y at - it a setting or something like that or I'm just miserable?

    Thank you

    Hello

    Try to disable the check of Palm, this might help you: Touchpad PalmCheck - turn on or off in Windows

    Thank you

  • Backlit keyboard doesn't work does not correctly

    Hi friends

    I recently bought touchsmart HP Envy 15-j122tx and noticed after the first day that the keyboard backlit light is uneven and after observation I find that led in the keyboard light are not working in some keys as other keys, what I now please replay fast...

    Hi frankricher,

    Thanks for the photo. It seems there may be a problem with the hardware with the backlit keyboard. You can try performing a (Windows 8) HP system recovery to factory settings to see if this fixes the problem.

    If this does not solve your problem and you are still under warranty, I suggest that you call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link to get help from your region number. Contact HP worldwide.

    I hope that this helps, please let me know how it goes.

    Thanks and good luck!

  • WRT610N - FTP works does not correctly

    Hello

    I installed the latest firmware, b 02, 10. It's a total mess with FTP, it does not work correctly:

    -I can't share the whole disc and see the files with windows Explorer

    -J 'have a lot of files in a folder of 2' 500 and 1000 only appear in windows Explorer!

    -by transfer ftp, router hangs up

    ...

    I use windows XP, FileZilla Client and the latest version of each driver or program. I tried to format the drive (NTFS btw), restart the router, restore the default settings (with the web admin button). ...

    It seems I have to wait a few months to use the router as advertised! It's a scandal!

    OK, finally I got it back working again:

    -format the HD and giving him a short name ("external")

    -Reset by webUI

    -flash

    -new reset by webUI

    -new configures the router

    I managed to share the same directory ftp and external drive, which is the directory root named "external".

    As expected, the speed is still poor, and some bugs are still new: in a dir I have 2000 + files in the windows Explorer that they are not all shown (about 1000).

    This router is my biggest disappoinement in the material ever.

Maybe you are looking for