Satellite A500 - game starts only when you run fraps

Hello

I have a Toshiba Satelite A500 with an i5, nvidia GT330M with 4 GB of RAM card, I only use drivers for toshiba and in dead rising 2 there are some significant slowdowns tried

Patches as rename the dead rising2.exe etc., it did not work, I play my resolution 1366 x 768 and with shadows and zombies at the top with 16 AF, leaving the vertical sync, sampling and blur to the broad, the game is full of similar slowdowns trolling (character begins to run slowly).
More funny thing is that when I recorded with fraps (lock the framerate on) I can play smoothly with no slowdowns at all, I even tested and set of 4 complete (AA) and turned on the vertical sync and the game was playable with no slowdowns on very large crowds of zombies, when I play normally without stil fraps recording, when the game slows down Press f9 for fraps to start recording and the game starts immediately

Race "smooth", fraps makes very large files and in a short time it would fill my drive, the program limits setting I tried but delays were still present:-no opinion on this subject or

possible correction for the game?

Hi fiurion,

Very strange what s... To be honest I never heard tell that it is only possible to start the game when you run fraps...

You have installed an antivirus or firewall program that could block the start of the game?

Also I recommend that you install the latest version of DirectX and display driver.

Tags: Toshiba

Similar Questions

  • Satellite Pro L300D started crashing when you are connected to the projector

    Hi all, I have a Satellite Pro L300D, have since January. In March of this year, it developed a problem.
    He began to turn the power on and off screen until I got the blue screen of death and had to reboot the laptop, also BIOS crashed. He was sent to Toshiba and got sorted.

    I use the laptop in the Church for the presentation to the powerpoint, we use a projector that connects to the video output on the laptop, but it has now begun to crash whenever I connect the projector to your laptop.

    Can I use the powerpoint, switch to the view of presenters and show the presentation of 30 minutes, then the screen goes black for about a second, the laptop and the projector off, then when they come again, I get a message saying that the display driver has been restarted, little after that the screen turns off, and then market / stop about six times before that I get the BSOD.

    Also, if I show a clip AVI or video during the presentation, it will crash soon after or even before its done.

    Have updated the drivers for laptop, I always get a message stating all the drivers are up to date and I am quite at a loss to know what to do next.

    To be honest, I'm so fed up with it that I am almost to the point of buying an Apple Mac Pro and away from Windows-based computers all together, my friends have macs and they never have any problem.

    Someone at - it an idea on what could be the problem?

    RGS
    James

    Hello James

    Can you please tell me what mode you are using for the presentation?
    Is that what this duplication mode (the same image on the LCD screen and the external device) or something else?
    Do you have problems if you use the single external device (LCD screen is OFF)?

    Movie files can be problematic if you run on laptops LCD and try to switch to the external display while the movie is running.

  • Satellite L350 - 16L system restarts when you run with power cord plugged

    Satellite L350 - 16L
    32 bit windows 7 ultimate sp1

    Power cable is connected, start the start, and just at the point where desktop should appear, the system restarts.
    When the system is running on battery, everything works fine.
    When the system boots to battery, works very well, and if I plug in the power cable, the system hangs
    When the power cable is plugged in, battery charge normally.

    I tried the different power cable, same thing.

    Do you remember when this issue began to appear?
    It would be interesting to know if something special that has happened in the past
    You use the original Toshiba AC adapter that came with this laptop?

    I think that this problem occurs due to the problem of the motherboard and I imagine that there could be some electronic problem power if the AC isn't affected adapter.

    I think it would be the worst case, because it means that your motherboard must be replaced to solve this problem... motherbaord replacement is very expensive and, probably, it is not worth to fix...

    By the way: is it possible to reinstall the system, while the laptop is conencted to the power adapter? What happens if enter you BIOS mode?

  • USB air card causing kernel panic only when you run Merge 4.1.1

    I got from many kernal panics when Plug and unplug an aircard for Sprint USB 3 G / 4G Wireless U250 Sierra when I merge 4.1.1 also running on Lion 10.7.2. The card taken aircard inside and outside without any problem in Leo until I opened the merger and works very well. When I do I immediately get the kernel panics. It made me lose many files on the virtual machine since the last snapshot, I had was at the end of November 2011. The Genius Bar told me that it was caused by Fusion and contact VMware or Sierra Wireless for help. I would use the card aircard on Lion and Fusion, but if I have to I it will cut merge if I have to and if possible. I see the report appear in the parameters of Fusion as a USB connection just before it crashes. I have attached the last log of kernel panic I. Any help or ideas would be appreciated. Thank you!

    I solved the problem on my Macbook with rachidoss tip!  I am writing this post now using my Sprint air card that I plugged in while the merger was running - no kernel panic!

    Angelsfan1, here's what you need to do:

    1. Install the SmartView 2.6
    2. Open Finder and go to system > Library > Extensions
    3. Copy the Beceem kext on your desktop and then trash the one installed in the Extensions Directory
    4. Right-click on the kext that you copied and "show the contents of the package.
    5. Open the file info.plist with TextEdit or another editor
    6. Carefully remove all the 28 entries following 2 lines:
    7. IOMatchCategory
      com_beceem_BeceemAppleWiMAXAdapter
    8. Save the file.
    9. Install updated to the kext.  For this you will need a free kext Installer.  I used Kext drop, but there are tons of free.
    10. The newly installed kext should now appear in the system > library > Extensions Directory.
    11. Reset
    12. SmartView open and connect!

    Thanks again for the tip and all the research done by your team of rachidoss!  And thank you for starting this thread Angelsfan1!

  • the cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

    The cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

    Hello

    · What is the number and model of the mouse?

    · Will there be any changes made on the computer before the show?

    You can follow the steps listed in the link below: how to solve the pointer display problems mouse in Microsoft games: http://support.microsoft.com/kb/309703

  • Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

    Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery, if/before you reinstall:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

    Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

    So what measures through 'install '?

  • Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

    Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
    Keyboard is fine.  Is this a compatibility issue?

    ---------------

  • How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

    problems with wireless Vista "local only".

    How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

    Hello

    Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

    • You are able to access the Internet?

    Try the steps mentioned below and check:

    Method 1:

    Step 1: Enable or disable a network adapter and then check:

    http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

    Step 2: Run Network Diagnostic tool and check:

    Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Method 2: Wi - Fi and in Windows network connection issues:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Reference links:

    Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

    Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

    Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

    Hope it works.

  • Tecra S2 began to turn off the power when you run some heavy applications

    I have laptop Tecra S2 and (almost 3 years) had no problem so far.

    Recently, it started to turn off instantly when you run some heavy duty applications, such as games. He takes turns instantly and can work hours if it's just a spreadsheet or just Web broswing documents but when I start a game it takes 15-20 minutes.

    Once I started it even once, it takes less time to get the same result.

    My guess is overheating - any ideas how to fix?
    Or it may be something different?

    See you soon

    Hello

    There is nothing to fix. The laptop needs to be cleaned. It must be done on the professional track. This means that the laptop must be disassembled as just at the moment when the cover is removed the cooling fan and the cooling rack can be cleaned properly.

    After having this laptop will work like new.

  • My PC (Windows XP SP3) restarts unexpectedly when you run Picasa Google Chrome and since I installed Acrobat Reader 10 it also occurs with this program.

    Original title: unexpected reboot

    My PC (Windows XP SP3) restarts unexpectedly when you run Picasa Google Chrome and since I installed Acrobat Reader 10 it also occurs with this program.
                                                                                
    Maybe the problem is related to this message in log file:
    SSD HDD access service-service & can not start due to the following error: the system cannot find the path given.
    Source: Service Control Manager

    I would be very grateful if you can help me.

    Hello

    Step 1: Use disable automatic restart on system failure option and check if you can find any error message. Previous post the error message complete and accurate which could help us help you better.

    Steps to select Disable automatic restart on system failure option:

    1. reboot the computer
    2 start typing the F8 key
    3. you get it anticipated the startup option window
    4. Select DisaDisable automatic restart in the event of system failure

    Step 2: Check if the problem persists in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on start and then click Run.
    2. type msconfig and click OK.
    The System Configuration Utility dialog box appears.
    3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
    4. When prompted, click on restart to restart the computer.

  • Error when you run DISM/online/Cleanup-Image /RestoreHealth - error 0x800f0906

    Error when you run DISM/online/Cleanup-Image /RestoreHealth - error 0x800f0906

    DISM / Online/Cleanup-Image /RestoreHealth

    Management and maintenance of deployment images tool
    Version: 6.2.9200.16384

    Image Version: 6.2.9200.16384

    [==========================100.0%==========================]

    Error: 0x800f0906

    The source files could not be downloaded.
    Use the 'source' option to specify the location of the files that are required t
    o restore function. For more information on the specification of a source location, see
     http://go.microsoft.com/fwlink/?LinkId=243077.

    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

    Ran according to this link repair instructions.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/dismexe-online-cleanup-image-restore-health-failed/668ef107-5f4c-4959-Ba93-76d052452315

    Network list Service will not start.

    ---------------------------------------------

    Verifying the service dependencies. The following error message

    Win32: A dynamic link library (DLL) initialization routine failed.

    -----------------------------------------------

    Windows Update is able to operate, and I am able to download all of the updates.

    -----------------------------------------------

    Here is my DISM.log file for troubleshooting.

    http://pastebin.com/Z2Fc8JL4

    Excerpt from CBS. Only JOURNAL entries [SR]

    http://pastebin.com/1jn2SWPV

    Complete CBS.log for 2013-06-22

    http://www.sendspace.com/file/hdq0yu

    You get the error 0x800f0906 because you have installed KB3022345. Uninstall it by going to programs and features in Control Panel and then click on the link "View installed updates".

    In the Find box top right, copy and paste (or type) KB3022345 and when it appears in the list, on the right, click on it and choose uninstall.

    See these two articles for more information on the subject: Microsoft confirms patch KB3022345 SFC/scannow breaks

    Windows patch KB 3022345 triggers apparent file system corruption

  • get the error when you run bootcamp on Sierra

    When you run Bootcamp-can not go beyond the second screen that gives me an error of pop-up windows 'startup drive must be an OS X extended (journaled) formatted partition.

    Workaround attemps I have partitioned my drive native and also used an external hard drive, both in format OS X extended (partitioned).

    I tried to use bootcamp years ago and ran across similar see the questions to stop. I thought I'd try a second time to run Winzozz 10. So frustrating!

    OS X Terminal, please after the release of

    diskutil list

    Apple does not officially support Windows on external drives. Microsoft is only supported under Windows Enterprise.

  • I get "catastrophic failure: (0x8000FFFF)" when you run backup

    I get the error message when you try to run the backup. I tried to run a check disk at startup, but I get another message indicating that I can't because "cannot access volume. What can I do?

    Hi Paul436,

    Try running the disk drive check WinRE using the full version of Windows Vista disk and check if it helps.

    a. Insert the installation disc.

    b. restart your computer.

    c. When you are prompted, press any key to start Windows from the installation disc.

    Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

    d. choose your language settings, and then click Next.

    e. in the System Recovery Options menu, click command prompt

    f. at the command prompt, type the following command and press ENTER

    Chkdsk /f /r X: (drive letter)

    Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

    g. press y when you are prompted to check the drive the next time the system restarts.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

    I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

    I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

    Sorry, the MSE tool is to set the MSE when its broken.
    UAC controller Tool v1.0 can be used to control the
    The UAC settings.

    However, I suggest you restart the PC and after BIOS hold the F8 key
    and when the Windows Startup Menu appears, select Mode safe mode with networking.

    Now, you will enter Safe Mode. On the page to connect, you will see the
    Standard Windows administrator click it to open a windows session, press and hold
    in mind, the password can be blank.

    Once you have done that make a new account administrator and giv it a name.
    Restart the PC. That you did this newspaper using the new account.
    Once you have done that decide what to keep with your current administrator
    account once you've done it restart the PC, BIOS hold down the F8 key and
    Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

    Go to control panel-> user accounts control and security for the family-> user accounts, then
    Select manage another account. In the list, select the administrator account
    your select and then delete the account, then it will ask you if you want to keep
    files etc, it's your own decision. Itknowledge24.com

Maybe you are looking for

  • Toshiba Satellite Pro 6000 upgrade 802. 802 11 b. 11 g?

    Is it possible to improve a 6000 Pro 802 Satellite. 11 b to 802.11 g by replacing the LAN card Wireless WiFi?

  • Changing the language in the BONE or...

    I bought a laptop in Italy a few days - Satellite Pro M40X 266. Understand that the change in the operating system to the English Version can be download from the Toshiba site. Attached is my 1st question, if I download/change language from Italian t

  • problems audio business PC

    Hello. I have a hp FU037ET #UUZ business PC. These pc-s come with an integrated video card, but when I put a new video card with hdmi output, it disables the integrated sound card and I have no sound at all. There is no audio setting in BIOS and I tr

  • Error loading C:\WINNT\system32\iwosxftx.dll

    Whenever I turned on my Windows 200 Pro, you'll see this message at startup (click the link for the photo). Click Ok will return to the screen. But is it a problem and how to solve? http://ImageShack.us/photo/my-images/259/img4995b.jpg/

  • HP envy: HP Envy fingerprint reader does not

    Simple pass works well using the password or PIN.  The fingerprint reader does not work. no light help please